First try at flying a cheap drone
1:13
Gray Hoverman Antenna
4:51
6 жыл бұрын
1998 International school bus
4:02
7 жыл бұрын
Backyard Flood
3:44
7 жыл бұрын
Scrapping the Mystery Monstrosity
0:25
Mystery Monstrosity what did I buy
3:45
98 C1500 Dash Progress
2:09
7 жыл бұрын
5HP Briggs and Stratton Carb Fix
8:45
Пікірлер
@MeMe-md3le
@MeMe-md3le 2 ай бұрын
Hey man I just came from the Astro van speaker upgrade I was just wondering if you used the same speakers for the front and rear??
@JonathanRader
@JonathanRader 2 ай бұрын
yes I used the same speakers. I think they came in a set of 4.
@MeMe-md3le
@MeMe-md3le 2 ай бұрын
@@JonathanRader bet man thanks alot
@TropTrevTv
@TropTrevTv 2 ай бұрын
Great video 🔥 doing this right now lol 5 years later, and what you said matches up perfect with my sound test before I order. I’ve noticed that the front doors are frayeddd crunchy bass coming out where as my back 4x6s sound great and the bottom woofers are all bass but not to bad. I played around with the fader and got more sound in the back until the speakers come but this was perfect to see what’s actually in the van so I don’t have to take it all apart
@TexasNEV
@TexasNEV 4 ай бұрын
I'd like to tap in / switch FM vs having to do tape or CD. Hoping I can figure out where FM gets injected into the amp.
@rayvs5447
@rayvs5447 6 ай бұрын
You gonna do the same on the other unit with fan?
@ernestobecerra8298
@ernestobecerra8298 7 ай бұрын
😂no way I filled up my tank too 🤣🤣
@roydervish-me2ns
@roydervish-me2ns 9 ай бұрын
Здравствуйте. Обозначение проводов для разъемов delco 15071234 не сохранились у Вас случайно? С уважением .
@gigmaresh8772
@gigmaresh8772 10 ай бұрын
Paint that rust with phosphoric acid and 24 hours later rust is gone, metal etched, and frame ready for glassing.
@MarioHernandez-hb8eh
@MarioHernandez-hb8eh 11 ай бұрын
Only thing, if you can make videos a little bit longer. Other than that, GREAT JOB!!!!
@arthaspay6029
@arthaspay6029 11 ай бұрын
Hello, I wanted to ask you for help. I have the same model that you present with an integrated fan "Delco model 15757047". The radio works well but it is missing a frequency coil to tune the different radio stations, so I wanted to know if you could tell me the codes. the coil so I can search for it and be able to repair my radio, I thank you in advance, thank you. The coil I'm asking you about is located just behind the radio's power button, along with two 47 microfarad 16 volt electrolytic capacitors.
@Sirskibumsalot
@Sirskibumsalot Жыл бұрын
I just bought a 1970 something Datsun truck with a 8 ft. Bed . Going to do the same as you . Should come in handy for my ranch . 👍
@hectorleon8373
@hectorleon8373 Жыл бұрын
Does this with monsoon radio?
@justenkelley7158
@justenkelley7158 Жыл бұрын
There are dedicated Aux input from the harness itself. AKA the AUX setting. Some of these came with CD players built in with an AUX tape player. I would have to check what pin out the back is LEFT and RIGHT. Dissassembly is unnecessary.
@jodielynnwiley5060
@jodielynnwiley5060 Жыл бұрын
Fuel pump relay
@DavidTheMechanic
@DavidTheMechanic Жыл бұрын
Is hose Clampett any relation to Jed
@kevindavis4709
@kevindavis4709 Жыл бұрын
These radios are smarter then people gave them credit for. You don’t see many modern radios you can unplug from the battery it’ll remember everything programmed. So turns out that’s w smart radio
@arthaspay6029
@arthaspay6029 11 ай бұрын
Que raro porque tengo el mismo modelo de radio y apenas lo apago y desconecto de la corriente no guarda nada de los datos ingresados como la hora
@JorjPradeep
@JorjPradeep Жыл бұрын
No ser dhis una odher modal
@ug9191
@ug9191 Жыл бұрын
This is an old thread, anyone around? lol You mentioned to avoid the stereo with a fan, (mine has the fan) does that mean it won't work?
@TheFlyingWrench888
@TheFlyingWrench888 Жыл бұрын
Maybe show how to remove it from the tank retard
@alkalineph9446
@alkalineph9446 2 жыл бұрын
Great video! The regulator is the real pain in the ass!
@mitche5007
@mitche5007 2 жыл бұрын
This is so funny :-)
@oscarhedden9524
@oscarhedden9524 2 жыл бұрын
Seems like they only go out when you have a full tank.
@unironicallyablueraspberry4959
@unironicallyablueraspberry4959 2 жыл бұрын
Cool. I want to try this
@GhettoWagon
@GhettoWagon 2 жыл бұрын
Good LF fender? Spindles
@denverkenyon3203
@denverkenyon3203 2 жыл бұрын
Don’t know if you will respond to this, but did you have a code 34?
@cr112784
@cr112784 2 жыл бұрын
Wat size and length screws? The ones (nuts& bolts) that came wit the new motor just loosened and fell out
@jhuber4112
@jhuber4112 2 жыл бұрын
Replace the CTS coolant temperature sensor
@walterfrancis7962
@walterfrancis7962 2 жыл бұрын
What is the parts number of the rebuild kit
@JT8D200C
@JT8D200C 2 жыл бұрын
That is not a pre theft lock model. It’s a lower end model. Made around the same time as the theftlock ones
@JonathanRader
@JonathanRader 2 жыл бұрын
You are correct this one is the same age but it's the older design. It is the same as the ones they used from at least 1990 and possibly before. They just updated the face plate and continued to use the old design until somewhere around 2000. I just used the term pre theft lock to describe the older/lower end same age radios.
@johnadams7399
@johnadams7399 2 жыл бұрын
When you had the run in the hood. Did you have to sand the whole hood. Or just the area of the run. I just painted with it and had the problem with the dust in a few areas. And was debating on sanding the whole panel. Or just where the dust is. Was curious if the next coat would look even.
@rafaelrosas2918
@rafaelrosas2918 2 жыл бұрын
How much didu charge for this i have no skill soldering
@davidbryant5875
@davidbryant5875 2 жыл бұрын
I use the same brand clear coat really good stuff
@specialed464
@specialed464 2 жыл бұрын
Nice sick and rad I got a 02 S10 I'm doing this but blue and white Cover me
@specialed464
@specialed464 2 жыл бұрын
Awesome job if you do this in navy blue and white I buy it for a dollar
@jaimezapien4897
@jaimezapien4897 3 жыл бұрын
So after I remove the bed and get new part, can I use the old assembly system on the pump, and just order just the pump ,or should I order the whole unit, which is another 59$
@layneewilson
@layneewilson 3 жыл бұрын
Thank you so much. I had this exact malfunction, and did this same repair. The computer is working great now.
@BGKO1992
@BGKO1992 3 жыл бұрын
I need the knobs for the radio do they sell they separately?
@luvzfrance24
@luvzfrance24 3 жыл бұрын
This is the best video!
@randythomas3478
@randythomas3478 3 жыл бұрын
Looks fine for a work truck! Plus you saved money! I'll be painting my S15 Sonoma and it's the same color!
@randythomas3478
@randythomas3478 3 жыл бұрын
Next time hang the fenders suspend them...
@johnbull487
@johnbull487 3 жыл бұрын
First to like, after 4 years haha . Was the mystery ever solved
@T_2_the_ravis
@T_2_the_ravis 3 жыл бұрын
Metal screwdriver on a fuel pump 😳😳😳😳😳😳🔞🔞
@stevenzagony6187
@stevenzagony6187 3 жыл бұрын
Will this will switch between the cassette and aux as well? another words, if I have a tape playing and throw the switch, will it go from tape to the aux input as well?
@gschady
@gschady 3 жыл бұрын
JERK the camera a little MORE next video .. I ALMOST saw a couple seconds of UNINTERRUPTED video .. hey? did you ever think of working a camera for low budget horror filming in unHolyWeird???
@TheSuperGamer1337
@TheSuperGamer1337 3 жыл бұрын
Assholes not needed! Get Banned from society why don't ya!
@flowerpt
@flowerpt 2 жыл бұрын
Why do you feel so entitled to be a jerk?
@HaoLyPhotography
@HaoLyPhotography 3 жыл бұрын
Any final product updates videos or videos?
@motorfntrash4254
@motorfntrash4254 3 жыл бұрын
Is the red truck a 5.7 v8
@angus1298
@angus1298 3 жыл бұрын
To turn it of get a screwdriver with insulated handle so short circuit the spark
@davidpotter9462
@davidpotter9462 3 жыл бұрын
Looks like mine but mine is red...lol..it says 130292 it was on a tiller and it had a tiny iron pulley on the cam for reverse which I cut off..I've got mine hooked to a 2000 watts Winco generator for charging my solar batteries but it has been sitting a long time...I've got gaskets for the fuel pump...I had it started running on half choke..there's a black wire that should go to the coil and the throttle linkage has a brass tab it touches when you turn throttle off thereby killing spark
@kbrawlz
@kbrawlz 3 жыл бұрын
In better detail than the others... To stop the engine, there is a “z” or “7” shaped bracket bolted on the head and hovers by the spark plug. It’s thin metal and somewhat springy. Hold it, touching the top of the spark plug, and it grounds the ignition and stops the spark plug from sparking. Hold it down until engine fully stops, or the momentum of the engines rotation will let it start back up.
@beerggls
@beerggls 2 жыл бұрын
That’s what I was gonna say. Reason there’s no rubber boot on the plug wire. Just make sure you’re not touching the engine with your other hand while you ground the plug!
@maxstephenson1968
@maxstephenson1968 3 жыл бұрын
What was the kit # I need a kit also
@solankitailor8139
@solankitailor8139 3 жыл бұрын
I would like a wiring diagram of this model....Wiring diagram of speaker power supply required.
@JonathanRader
@JonathanRader 3 жыл бұрын
www.installdr.com/Harnesses/GM-Wiring.asp Is this what you are looking for?
@antoniomartinez7989
@antoniomartinez7989 9 күн бұрын
Where do I need to connect the power wire for those radios? There are 3 sockets, 2 that are joined to the left and one more to the right side next to the antenna.