Good morning sir, Thank you for this update here on this china boat builder. I have been messaging Yee at gospel and went to wire my deposit yesterday but my bank asked me to double check to make sure this is a legit company and was hoping you can answer a few questions for me? Thank you and please let me know

Great video...is the process the same for the 11 catamaran?

How is it holding up these days? Asian boat manufacturing has come a long way.

I have seen paint booths and whole boat is pressure washed and then final washed again with pure water with no salts in it then washed with a oxidation retardant which keeps it perfect untill primed. There is no better system.

Anymore big update? How is it holding up nowadays?

These are just copied from Stabicraft. Not worth risking your life on

Hi I have purchased a 6.35 cuddy cabin model that was sittibg in a shed in indo for 3 years and im just about to fit it out would love to have a chat and pick your brain on a few things please?

Just wonder who your suzuki dealer?

What model size boat is it? Thanks for cool videos

Hey, how is it doing after 24months+? Would you buy it again with your todays knowledge?

Hi . I have the same boat with suzuki df300 apx. Which propela do you use? Mine with 3x16x20r only gets 5000rpm. I think I must to go down 2 or 3 pich. Thanks

Wilding is not professional sorry she cracks

So apart from the paint peeling, the structural cracks, poor waterproofing, poor fuel system design and aesthetically poor welds, there's nothing wrong with it. So far. 👍 Thanks for your honest feedback as it helps those planning on purchasing a new rig. Think I might go for something other than chinese made. At least until they can prove they can build something of quality. Hope it continues to get you and the family out there and back.👍

Calm day

Sir, with regards to the cracks you should deal with them as soon as possible because the corrosion will still get into the cracks and spread, plus it will put additional stress on the rest of the weld. At least get yourself a drill 3mm and drill both ends of crack to stop it running further. The get the crack ground out and rewelded.

The Anchor sock just use large electrical heat shrink at each end. I use it on my Anchor rope over the spliced sections works a treat. Plastic Cable ties will break down in the UV and Salt. Stainless wire or Cable ties will break due to flexing. Nice honest review, Im not sure of your background but those cracks are showing you have a lot of movement in the hull. Pay a boat builder to do a inspection as it may need extra bracing below the deck as well. On a side note I worked for a Engineering that started to import ion ore crushing machines from China. I remember the first one we imported looked good from a meter away but when we did the proper QA we found that the so called welds where painted silicon. The 2 ton sample crusher had been put together with Tack welds and the Silicon to look like perfect welds. I have worked with Chinese manufactures before and unless the workers are supervised they will cut corners and see nothing wrong with it.

Any further reviews?

That's what it's all about🤙🚤🏝🎣

Thanks for your review, I just purchased a 625 walk around myself from All Seas👍

Sir, how is the Gospel Boat holding up to this date? Might you be planning on another update video post?

What ever happened to the cracks? Did they get worse or stay the same? Did you end up fixing them? Any other dramas you’ve come across?

Hey man I’m keen on getting one of these boats. You still running yours? How’s it holding up?

The best way to fix the chain sock is to use cable ties. Pass it through the sock at through the chain link.

Hi jack

Cheers for the post, its awesome. Any chance of an updated review?

To fix the nylon anchor sheath sliding on the chain, just get some stainless mousing wire and poke it through the sock and through the centre of a chain link, then wrap it tightly a few times & twist it off. I did this at each end and every 1 metre down the chain sock. Works a treat.

The welds look hideous! Not trying to hate on your boat either. Just saying what I see from what you are showing.

The welds that you believe are o.k. because they go in a straight line are just not good enough. They have tried to cover this with thick paint, carpet style trimmings and rubber type sea decking, and that`s the point-a cover up. Also the cracks don`t bode well for the structural integrity of the boat. Just pay the extra for peace of mind, if you can`t pay, don`t go boating. House made of straw remember!

I'm a welder and I wouldn't be buying one of these things and would not be going outside in them things

Do you keep this boat on the trailer ? Is the paint on the bottom considered a “bottom paint “ that you could leave in the water ? Just curious how much electrolysis would happen if it sat in salt water. Does it have aluminum anodes ? Did you consider any other alloys aside from 5083 (like 5086) ? Thanks !

great review thanks btw are there any dealers in Singapore?

Haven't been able to find any videos of the stabicraft copy's going in ruff stuff apparently they aren't to good from what stabicraft say, but as for my next boat this is probably it

You the idiot men ....tu many comen if you don want buy the boat just don

Hi guys please be very careful about that's they said there is too many traps waiting for you to jump in

Hi mate did you have to take it back in for the compliance plate recall and did you do all the ordering and shipping for it I am looking at purchasing one

Hey , thanks for the review much appreciate the time and non bias opinion you have given , I'm looking at one and have seen one review shit caning them however I have seen peopl in forums with Yellowfiin plate boats where windows are leaking that bad that passenger can't sit in seat , water streaming out of the hull for minutes like a hose after use and that's Australian built and $135k , so thanks for showing us that are looking at an affordable boat that still want to do some offshore fishing 👍👍

Hi, what is your view on the trim tabs on this boat, would you add? Do you find you use it regularly?

Hi East Coast Fisher,it seems you have been using the 7.5m center cabin for 3 years.Do you have plan to change to a new boat?

Don’t buy a quintrex

Thanks for the reply. One more question as I have conflicting info. Is the hull 5 or 6 mm plate?

Thanks for the reviews really good. When you opened her up to add fuel tank, what was you impression on the out of site stuff below deck? Is there areas where water can seep into and not drain?

Hi there, Looking at getting one myself. Have you had it out on many rough days yet and I so how does it hold out?. Any hints or tips for myself as a buyer? Cheers Daniel

Watched both of your boat review vids. Went on a very early Chinese Noble International. It had a little bit of cracking on the cab too but up the front near the windscreen and the hard top supports. Rode super well. I was impressed. My only comment would be should you have a safety on the anchor chain for travelling or can that winch be trusted 1000%?

Great vid mate Shit Quality tho

Hi, we imported on last year snd looking at version 2. Would like to chat about some things if you can

Interesting little issues. Those 2 cracks on the side of the cabin supports are serious, it's metal fatigue from sideways movement. Definitely attend to this while it is easily repairable. You need to add 2 x 8mm x 75mm 306 stainless steel flat plate from the bottom of the side walkway all the way up to the roof fitted flat on the end of the upright. It should NOT be mechanically attached, but glued on with Sika 11FC structural polyurethane adhesive sealant over the cleaned paint, this will allow some minimal flex with the boat. If this is not done, the upright will likely snap off with fatigue in a couple of years with some rough weather.

A little off topic but why did you mount your deck winch forward rather than to the back. Is that flush mounted? Have a couple we're mounting on our Gospel and want to get them right the first time.

Hi thanks for the video. I'm getting a 7.5m cuddy cabin without walk around, hope I get a similar performance as your 300hp with twin 140hp. Was your fresh water tank factory installed or done yourself?

Legend. Sorry didn't see this when I posted in your previous video

Showing my lack of skills, you able to give some guidance on the hose and fittings replaced, and how you did the fuel tanks. Maybe even an education video 🙏😜