For anyone with the rear bumper off, unscrew the side heat shields and remove them, about 5 bolts,, Unbolt your tail pipes and remove, that way you can either swing the mufflers to the side (they swing on the bracket easy access to the plugs) or unbolt the side mufflers, 2 bolts,, both easy jobs takes around 10 mins, at that point you have full access to the spark plugs without even removing the wheels, there is no awkwardness getting them out, its straight forward,, still a helpful video though, but if you went the extra mile you'd have found it so much easier.

Great job. Nice to see what's possible and the process to get there. I'm replacing an M&SN350 in 2024....

i’m about to do the same and don’t have a windows license should i get one beforehand or should i be fine?

Having a dac is so much better than not having it... i guess the ipod input has it? Cuz theres no way naked digital audio sounds better than analog audio from digital sources.... im a little experienced in hifi so i know my audio! Feel free to ask or correct me

life would have been so easy for you doing this job if you had taken the extra 10mins to removes all the heat shields, access to everything would have made it so easy, I just used a G clamp hit it with a hammer on every bolt and replaced them, I wasn't on a ramp on the floor easy to do, with the heatshields out the way, no need for Vice set up :-), informative video made it look harder than what it was tho, ,I kept saying to myself, Remove the heat shields 🙂

Update i7 7700k z270 msi to i7 14700k z790 asus and after windows update and armourycrate updates all runs fine. Benchmarks ok, games like cyberpunk, star wars outlaws . Vs2022 check. All i want todo now is cleanup and update to w11, even when it doesnt seems a need. Well its not w98 or xp anymore. 🙂 Windows actually made some good improvements.

12:14 Good video. For people who haven't done it...They sell pw hose with 1/4 fittings, then on the other have a 1/4 to pw m22 adapter.

Thanks for your comments on Win 10. BTW Zs, gotta love'em, I have a 1990.

Well done. Does it drone at highway speeds?

on the ohlins site the data is different: the say to cut 20mm from the front boot (not 62)

I have done it both ways and never found a compelling reason to do a fresh install.

I going from asus prime-a ax b650 to a asus rog strix b650e with same cpu and dont know what i need to do if it will not delete my game files or reuse my windows ?im using same ssd drive.if someone can shed some light on this for me would help.❤

What a time to be alive.

By far the best video! Thank you very much, you motivated me to do this on my own over the weekend.

Alr hear me out i know this aint reddit but idk that neardy stuff. If i change my MBO ( form intel 10gen compatible to am4) and my CPU and i just shove in my old used SSD that has everything on it and just turn on my pc, will it work fine? Btw ill buy a gigabyte MBO.

I’ve got my right trailer brake/right turn signal light solid red all the time??

What cupholder is that?

My B460m motherboard just died. If swap it with h510m bord, Will all my data will be safe? Or i will lost them

Have you sold the old rig?

neat and purposeful...however, I'm still a sucker for Bazooka tubes and/or low profile/slim 6"-8" subs...did you take the time to add 6" squares of sound deadener for panel resonance control?

Your build is actually criminal, It hurts my eyes, probably the ugliest pc I’ve seen in years

Do you recall there being a lot of play at the clutch fork pivot point, ie being able to push and pull an 1/8"? I have quite a bit of play with mine and I can't tell if it's by design or if the ball socket and/or rubber seal are worn.

I’m about to embark on the same upgrade for my 1999 996. Can provide a link to these tables? Or your search terms? Great video and thanks for PIF!

Thx!

Hey thanks for the video. I just wanted to make a note, to let you know that the dialog at the link that shows the pin-out, states that the outputs from the Head Unit are Hi Level (Speaker Level) outputs, and then further down the page, someone suggests that they should connect them to the Speaker Level Inputs on the new Amp, when in fact they are Line Level, and should be spliced into RCA cables and plugged into the Amp thru the RCA Inputs, like you did in this video. Just in case there was any confusion due to the conflicting statements... Thanks again.

I still have an analog meter ! Great video !

I think they gave me a bad controller box when I bought the harness kit for the trailer. I have an extra one, but I haven’t soldered it in yet. I wish there was a way to test just the booster box.

Im trying to do this but i'm upgrading from Am3 to Am4 will it still work?

Your hands block all view

but the problem is the read of the cores in the windows itself. . .

Do the multifunction controls on the steering wheel work in CarPlay apps to control volume and skip songs in Spotify, Apple Music, etc?

Do you the link for the tile cutter? Not the handtool

This is great content. Thank you for sharing the various aspects of TB cleaning, center muffler replacement and spark plug replacement.

Thanks for the video..

Yep you need to match the spring and dampening!

7 months later, did any problems come up or did everything run perfectly fine after the swap?

Absolutely great video, well explained process. Just completed the same replacement using you tutorial. Cheers

"Nobody had analog multi meters" I disagree, I have one for the simple fact that watching a digital meter bounce around all over is insane. The analog is far less dramatic and the needle is either going up or down or steady. Much simpler to read and you can tell if there is power or not.

Seven months later did you run into any issues?

Question: just got my spark plugs replaced at the dealership, it’s a 2015 c2, with 35,000km, 21k miles. Before taking it in the idle needle was perfectly solid at idle when stopped at a stop light… Now the car ever so slightly has an up and down flow, like about 50rpm up and down constantly. Dealership is saying it’s normal and it was always there… I’m ocd, it never did this before. Performance isn’t affected, nor does it feel like it’s going to stall or anything but this definitely isn’t right. Any ideas what they could have messed up? Again, this is a Porsche dealership. Any help would be great!

My pins have 24volts!!! Anyone hsve any idea why?

Being told the 2024 models use different part numbers ?

Seems like alot of work to use just the uberflex hose. I just bought this and started taking it apart, and now I think I'm just going to use the regular hose that came with it. It's just too much work and cutting.

Just watched your video, I, too, am seriously considering replacing the shift knob on my 2024 718. Thanks so much for posting this. Curious which knob you finally decided on. I’m leaning toward the Sport one when the time comes. I love my Boxster but the shift knob has got to go. Will probably tackle it next spring. Problem is, I’m really a novice so I will watching your video a couple of times before I tackle the switch.

What goes into the socket at 15:00 minutes? the wire from the coil connects to the socket at 16:00 minutes correct? I’m just really confused about the connection shown at 15:00 minutes

Hey, I replaced my clutch yesterday and after testing it, the clutch started smoking and I shut off the AC to prevent a fire. I’m not sure if I made a mistake with the connection or tightened the clutch too much to the point where it’s causing friction. I connected the wire from the coil to the connector coming from the engine bay, I also noticed another connector but there is no socket to connect a wire into.

Move the shut off to the end of hose. Then you don’t have to do all that. Turning on turning off the water the power. You could just shut the water right behind sprayer, pop the sprayer off put on your new wand.

What if you go from Intel to an AMD upgrade?

Great video. I just purchased this and will be setting it up on my Mobile Detailing Trailer. I saw the video you mentioned by Cars With Keav not long ago. I'm debating if i should just change the hose now, or wait for failure, 😔..lol.. I'm gonna have my other hose with me irs just not on a reel. Hopefully i can at least get my monies worth before it tears up

Having a highly repairable refrigerator with an awesome warranty is so much better than owning a disposable one. I love how they give you a free compressor on a high end refrigerator like the 1993 top compressor kitchenaid fridge my mom used to have whenever there is a significant loss of refrigerant charge when it’s under warranty.