Hello

I used a dc-dc step down it powered up for a sec and it never did it again

@DrPluring did you mean that you connected the diodes in parallel or series because I believe it should be in series or is it in parallel because of the (BMS) having 2 positive slots?

Oj,oj oj.! Vilken tid det tar

This iPad now runs from 'battery' only, no USB power. The iPhone you show however has Lightning/USB connected AS WELL as power to simulate battery. Why? Does the iPhone not work with battery simulator only? Should be same as iPad surely.

what is the point of the diodes?, just to protect the psu?

Hope you always have enough petrol, some extra clothing and some food to feed the reindeer. Amazing to watch in a warm room with a cup of tea.

After woke up I realized that he didn’t clean (well) the LCD and neither explain or show the process

Hi There is enough thermal paste, the reason is often that the LEDs are run at full voltage and since the voltage in large series is not always stable on those made in china stuff, some LEDs get overvoltage and are the weakest link. Heatsink is really weak, even my 10W light have large size fins in the entire rear area, it could be good to have small fan for interior use to assist cooling. Never file the tip of the soldering iron, you damage its coating and it starts to corrode from the inside. Tip must be cleaned with damp sponge, for example, which comes with the soldering station, always clean the tip after soldering, if you dont use it for while, you can put tin on the tip to protect the tip and when you take it off the stand again, wipe the protective tin off and start soldering. I have same soldering station for basic soldering and tips last long time with the right treatment, then i have professional level soldering station with hot air unit. I grow strawberry plants in winter, at the beginning of summer they get to grow outside. Normally I have had mild flu every winter, but during Corona there was none when we protected ourselves perhaps too much from the flu in the basic season and now that things have become normal this winter I got really bad flu, i was so knocked down. When you are tired, interest or mood is low, it is good moment to take break and maybe sleep overnight and try again. You should never force yourself to do something if it is not necessary to and you dont feel to do it that time.

Looks depressing as hell! Last christmas we also didn't have any snow on the ground, around the beginning of December it fell and was deep enough to sink a newborn. Around 17th of Dec the weather decided to melt almost all the roadside snow, so walking to a bus stop was a privilige, so I slided off my ass to there xD, But yeah, miss cold winters and Häid Jõule!

Promo*SM ☝️

I’ve just done the same thing but used a Shelly ProEM 50 which is din-rail mounted so looks better when placed next to the contactor and has external CT’s for load measuring, but costs a bit more. Completely agree about what wind and solar are doing for the grid and the insanity of Germany shutting down it’s nuclear plants. If everyone’s hot water tank was able to turn on when it was windy or sunny then that would at least would help the situation. But since there is no direct technical solution available that I am aware of, we will have to do it via variable pricing.

In ATX power supply PCI 12V gives more amps out than 24pins 12v line, PCI and 24pin have separate rail but you should possible to combine both. Good ATX power supplys have electronic overload protection that resets when you turn it off for a while, this what you have looks so cheap one. I used PC power supply years ago to get 12V but now days i use server power supply what was over 40A. I have same booster on my DIY scooter charger and if i remember boost is made on plus side, ground is common.

Hi again. About year ago i made my first 12V 280Ah LiFePO4 battery and have been on my solar system. Last year summer i bought 35L compressor fridge for travel use for the car and those are 100 times better fridges than those Pelter ones what just draws around 4A all time, i made temperature control for peltter but still was not good, compressor coolers/fridges are way better in efficiency, i had 100Ah AGM battery for fridge and it was so heavy and large, i made new from EVE 105Ah cells. Few weeks ago i made new 24V battery for my UPS from EVE 105Ah cells also, had enough of those sealed lead acid batteries what you need change all time. I work with batteries, i build and repair, hobby and works with batteries 😅 My 12V solar battery have that same JK BMS what you have, 2A balance version. I just say for example 4 Amps and in Finnish its like 4 Ampeeria, Ampeeri is like unit word. with JK BMS you can balance battery with balance mode if you have alot difference in cell voltages, just leave it and it will active balance those. Use ring terminals on balance wires, so that those makes good contact when they are under nut/bolt, never put balance terminal under bus bar.

I work in a company that builds batteries and lifepo4 cells do not need to be compressed with 300kg pressure, but the ends should be tightened so that the cells cannot expand any further and can withstand pressure that tries to make the cells bulge, so ends should stand 300kg force. If cells can expand, inside cell the structure can move and reduce the life of the cell. I have made few own 12V 280Ah batteriesfor solar and those have plywood ends with threaded rods, few 24V 105Ah for UPS batteries what have plywood ends and fiber tape around.

I have the super 8 train crash at 5:44

Playing with battery blocks . How old are you dude ?

Waste of time,thanks for showing me just how much daaaaaaaa time I could tolerate. 😊😊😊😊😊

Hi from Finland. I recommend using insulation between the cells, I used fiberglass insulation board myself. There is no shrink wrap in the cell, but some kind of sticker type wrap, its just peace of mind when there is something better between cells.

det där saltet innehåller cyanid. själv föredrar jag rent salt i mitt snus.

Hi, I have two 55ah batteries and two 52ah batteries (lifepo4 cells) can I run them in series if I dont fully charge them?

Thanks

8:30 yes, that definitely needed some redesign:) That is called organic growth in biology...

Im try to do this. But my ipad Reboot 3-4 minutes after on. What the Power charger you use? My power is not a original power charger, but im using a charger with 5v. Im remember the charger of ipad have a 10v What you recomend?

Just went outside to find some spruce cones for fun, Hope you enjoyed filming this!

Don't worry for the negative comments and go forword . You are doing well .

Good idea indeed

Video looks like it was done by a 10 year old kid, both for quality & content.

Not sure how im here but I am, game looks to complex for me but still watched a 20 minute video on it, interesting

By not connecting your negative to the BMS, you are essentially skipping it. Which is not a bad idea because the BMS will disconnect those terminals if the voltage goes under a certain threshold (normally to protect the batteries, so probably around 3.6v), which would essentially always happen when you disconnect your device.

How about to mount a TP4056 to provide 4.2V to BMS port.

Fire 🔥🔥🔥🔥🔥

Que carajo es esto, se rompio el algoritmo de youtube

?

I tended to think of starting a realistic mode game after WRSR is released from EA. There seems to be only one major update, waste et al, before that should happen. Running that mode with everything enabled seems............interesting, and most time consuming. It's appeal, for me, would be for the player involved rather than watching at normal speed. Good idea to do a fast speed video, altho I did expect to see your first citizens moving in before the end of it. Clearly it wasn't fast enough, lol. Even with the hours you have had playing this game I was surprised that you adapted well to a realistic start. Whilst I have over 1700 hours not much of that, recently, has been about starting a new map and none of it to do with realistic mode. Even on a well established map you need to prepare so much underground, and above, infrastructure before you expand.

A true gosplan planner

Way too efficient for a soviet project. Way too organized. Needs more useless party officials and NKVD operatives milling about. Bureaucrats are essential. For the authentic communist experience, you should be pouring money into financial blackholes, wasting time and resources on useless vanity projects, constructing canals that no one will ever use... sacrificing thousands upon thousands of soviet workers for bragging rights.

That chimney in the control rooms building looks familiar, it is a RBMK nuclear reactor with control rods with graphite tips?

"If you're not meant to play with fire why did god make it so fun?"

I have one I gotta get done soon as well They don't take long to grow

I understand what you are going through Been almost 7 years for me with same sort of issues Stay strong

I know Sabaton myself, but I am not really a rock fan, they're songs I have listened and I must admit, party people they are.

can we do this for iphone 3g-gs too? I tried running iphone 3g with nokia battery but it kept reboot itself every 3-4 minutes.

Interesting to test an Arc GPU. Always good to have another manufacturer in the market, hopefully Intel will stay and constantly improve. At least it offers choice, whilst both AMD and Nvidia seem to be focussed on high prices for their latest gen cards.

I can't find an excuse to comment something here so uhh... Hello!

If you dislike humanism and tax financed healthcare, why not move to the USA?

Sounds just like the original, But yeah, Patriotism in a European democracy is very rare, simply because it makes people call them "Fascists".

What do you mean? It runs so well! Just like always my good old PC Does!

I can hear the tears from the car, man! What you do to him!? :(

I think Dr. P was a rally driver in another life.