Пікірлер
@wahmomma1351 42 секунд бұрын
😳did not know this existed‼️‼️ THANK YOU
@linuxxxunil 57 минут бұрын
Could we use this router with a Sonos speaker system? In case anybody out there doesn’t know this… Sonos will not work with captive portal.
@justinreviewsandrepairs5246 51 минут бұрын
I do not have a sonos, but once the router has Internet you should be able to connect devices to it as you would at home. The devices would not need to go through the captive portal shenanigans since the router itself is routing things through its already completed captive portal connection.
@ManBearPig3 2 сағат бұрын
Good video on setting up a point to point VPN.
@justinreviewsandrepairs5246 2 сағат бұрын
Thank you!
@gregorioacostajr111 8 сағат бұрын
Just replaced my wife's battery on her fob! Super helpful and simple explanation thank you bro! Have a blessed day!
@justinreviewsandrepairs5246 7 сағат бұрын
Thank you! 🙏
@Dinkleburggg Күн бұрын
What do I set the wireguard server IP (says ipv4 on the beryl ax) if my home router is also 10.0.0.1
@justinreviewsandrepairs5246 Күн бұрын
Please see this video: kzbin.info/www/bejne/i4W9XpKwra6isLM
@keisheldefreitas3241 2 күн бұрын
Hi Justin I did all the steps but when I went to VPN dashboard and I do open VPN it do n load I just says on the client is starting please wait
@justinreviewsandrepairs5246 2 күн бұрын
NordVPN has changed how you login since this video was recorded. You will need to use the "Service Credentials" from the NordVPN website instead of your usual username and password.
@trailerminer9650 2 күн бұрын
didnt work for me gonna have to reflash again
@justinreviewsandrepairs5246 2 күн бұрын
Sorry to hear that, I guess this is why they have released a whole new version?
@vahora1993 3 күн бұрын
Can you please help me to setup port forwarding, i went through your video in port forwarding but it did not help me much. I would like to connect with you on this issues. I am here in Texas and would like to connect with you on this issues. If you can help me out setting up this. I purchased same routers as you have in this video and i am unble to do it as port forwarding is not working for me.
@justinreviewsandrepairs5246 2 күн бұрын
Hello, Port Forwarding is different for everyone based on your Internet Service Provider. Even within a provider they often have multiple different models. It is best to lookup your provider and model number for a video on KZbin or call your provider directly for them to help you complete Port Forwarding. Otherwise you email me a screenshot of your Port Forwarding or you can get 1 on 1 help from RemoteToHome.io which has provided a 5% discount code: JustinRR5
@vahora1993 2 күн бұрын
@justinreviewsandrepairs5246 Thank you so much.
@justinreviewsandrepairs5246 2 күн бұрын
@@vahora1993 My email is on this page after the troubleshooting tips: justinpruett.com/glinet-troubleshoot.php
@nataliestokes3712 3 күн бұрын
Hi can someone please help me with setting this up
@justinreviewsandrepairs5246 3 күн бұрын
Yes, please see the pinned comment or the description.
@Mwill811 3 күн бұрын
Curious if I’m the only having issues with this set up recently. For the past month or so, my internet connection has been incredibly slow abroad. When I test my out of country internet without using the router, the speed is fine at 100+ mbps, but when I connect it through glinet I’m getting max 1-2 mbps download. A significant drop off! At first I thought it was my company-owned laptop that for some reason wasn’t allowing me to do this workaround anymore. But the issue is also on my personal devices. Software is up to date on both routers. I’m using the berylAX at home and the slateAX when I travel. I’ve confirmed the set up is working on both routers. Any advice on how to troubleshoot this, please?
@justinreviewsandrepairs5246 3 күн бұрын
You can see if there is poor infrastructure between two major cities using this website: wondernetwork.com/pings if there is latency above 200 Ms then you will see significant speed issues.
@Mwill811 3 күн бұрын
@@justinreviewsandrepairs5246thank you! It’s over 400ms. 😢 what can I do to fix this? Or it is what it is?
@justinreviewsandrepairs5246 3 күн бұрын
Not every country has good infrastructure, sometimes Starlink may be a better option than local Internet providers.
@Mwill811 2 күн бұрын
@@justinreviewsandrepairs5246I’ll look into that. Do you have a recommendation of where I can go to find good information on it?
@justinreviewsandrepairs5246 2 күн бұрын
To find good information about infrastructure? Or Starlink?
@KevinDavisMedia 4 күн бұрын
I was going to use the Flint2 and Beryl AX but that setup is over $200, can I just use 2 opal routers ? will the speed be less ?
@justinreviewsandrepairs5246 4 күн бұрын
The Opal is no longer recommended, but you can still use two Opals. It will be significantly slower, but if you don't need speed then it is a cheap option. Two Beryl AX would be a cheap and fast option. The description has a list of devices sorted by performance.
@Tepera 4 күн бұрын
Justin, my company works on Apple Mac computers. Will this still work?
@justinreviewsandrepairs5246 4 күн бұрын
It works on anything that supports Ethernet or WiFi, including Macs, since the Travel Router is running the software, not your computer.
@WaitingtheAliens 4 күн бұрын
Mine is not resetting anymore even I press it 10 seconds. device willl not restart anymore and seems bricked with previous configuration. Dont buy this device, it is a disease.
@justinreviewsandrepairs5246 4 күн бұрын
I have 3 of them right now, all working fine, but I only run them in Medium mode. Did you run yours in High? Are you willing to sell yours? Otherwise you can try reflashing the firmware.
@TheCorneremperor 5 күн бұрын
Hi Justin, everything seems to work well when the Opal router is used as a repeater, but when i plug it in directly to the ISP Modem, the travel router cant connect anymore (the Opal router still works). The wireguard client on the travel router only works when the Opal router is in repeater Mode. Any solutions for this? Thanks in advance
@justinreviewsandrepairs5246 5 күн бұрын
Hmm, it should be the opposite, the VPN will only work if the Opal is in Router mode.
@TheCorneremperor 5 күн бұрын
@@justinreviewsandrepairs5246 Do you mean the Opal Router should only be in repeater mode and not Ethernet?
@justinreviewsandrepairs5246 5 күн бұрын
@@TheCorneremperor I misunderstood, I thought you changed the router mode. There are multiple Ethernet ports on the Opal, be sure you are using the WAN port on the Opal Router to connect to a LAN port of your ISP Router (or your ONT if using this as your main router). Feel free to send me a screenshot of the Internet page and pictures of your equipment if that does not work.
@jamurko 5 күн бұрын
Is the P30T worth it for $50?
@justinreviewsandrepairs5246 5 күн бұрын
For $70 to $100 I think the P30T is nice
@Sinnbad7 6 күн бұрын
How's the front camera on the p30?
@justinreviewsandrepairs5246 6 күн бұрын
It is not as good as the back camera, you'll definitely want good lighting: x.com/justinpruett/status/1875838633707807073
@SunilKumar-cp7qk 7 күн бұрын
For any of you trying to set up with TP link routers, I suggest you to go with GL routers only. I tried configuring with TP link routers but it was a nightmare. With GL it was very easy to configure with Justins instructions in the video. Justin is very responsive and his suggestions have helped me a lot. Thanks again for all the help and this content.
@justinreviewsandrepairs5246 7 күн бұрын
Thank you! GLiNet makes a great product at a low price, that's why so many people across various industries use them! The TP Link router that is often suggested by Amazon as comparable has a low price, but it is not great. You'll need to spend more money for a product that is comparable.
@boatengine341 7 күн бұрын
At my home, the internet is behind NAT and doesn't have a public IP. However, I am currently in another location. Can I use an Opal router at my home as a VPN server and another Opal router as a client to access the internet at my home? sorry am translate
@justinreviewsandrepairs5246 7 күн бұрын
No, you need to be able to Port Forward to use WireGuard ®️. You can get the Beryl AX and use TailScale instead, but it is still in Beta and requires some advanced steps via the command line to complete. You may want to consider hiring RemoteToHome.io for the advanced setup. They gave me a coupon code JustinRR5 for 5% off
@boatengine341 7 күн бұрын
@ But my isp has port forwarding and ddns.
@justinreviewsandrepairs5246 7 күн бұрын
If you are behind a CGNAT, you won't be able to Port Forward. You need standard Internet, not shared Internet.
@boatengine341 6 күн бұрын
@@justinreviewsandrepairs5246 ok thank
@Major-Kudos 8 күн бұрын
Thank you. Figured out all but one thing and this helped me! Very comprehensive, very well done. Bravo, 10/10.
@justinreviewsandrepairs5246 8 күн бұрын
Thank you!
@delilahsjar4292 8 күн бұрын
Hi Justin, I need this setup since I will be working remotely in South Korea. I know they have some VPN restrictions but i have been able to use Nordvpn and ExpressVpn no problem while there. Do you think the site to site vpn will workout for work?
@justinreviewsandrepairs5246 8 күн бұрын
Unfortunately I have not been to South Korea and I can't find any information from a Google search as far as how their censorship works. If they are only censoring websites and not the VPN protocol, then it should work. If not, then maybe one of the approved VPN providers in South Korea offer Residential IP Addresses? Please let us know how it goes!
@lanexang8127 8 күн бұрын
Do i have to buy VPN ?
@justinreviewsandrepairs5246 8 күн бұрын
Yes, unless you run your own VPN using a second Travel Router: kzbin.info/www/bejne/gonFdZpnq5toh9U
@sundarvadivel2479 8 күн бұрын
Thank you so much! Very helpful. The first time I contacted the service center about this, they charged me around 600 bucks as I was unsure how to open the key.
@justinreviewsandrepairs5246 8 күн бұрын
That is outrageous! For that price they typically program a whole new key!
@official_d3nzz 9 күн бұрын
Hi Justin, Thank you so much for this great video! Can I ask, if you are looking to use this route while travelling abroad and connect a company laptop (Company laptop needs to connect to a company VPN that only works in the UK), is it better to set it up this way, or set it up the way you show in your other video using two routers to show your home IP address? Would you be able to explain the difference/ benefits in this case? Thank you so much for your time
@justinreviewsandrepairs5246 9 күн бұрын
It simply comes down to what your company allows. Using two routers should work with every company, but using a Commercial VPN Provider such as NordVPN may be blocked by some companies. Especially financial or government contractor companies. Typically running your own Server with 2 routers is the way to go, but this means you need to make sure your power and Internet don't go offline while abroad. So if you don't have reliable Internet and power, then using a Commercial provider would be a better option if your company allows it.
@official_d3nzz 9 күн бұрын
Thank you so much! Appreciate it a lot! And if you were to use 2 routers, which 2 would you recommend now the Beryl ax is out? Maybe x2 Beryl ax? Or would you recommend slate ax? Although, I can’t seem to find the slate ax on Amazon in the uk, but there is one called GL.iNet GL-AXT1800 which may be the same thing.
@justinreviewsandrepairs5246 9 күн бұрын
@@official_d3nzz The other video has a list in the description, but two Beryl AX would be a good budget option while a Slate AX and a Flint 2 would offer the best performance.
@official_d3nzz 9 күн бұрын
@@justinreviewsandrepairs5246 thank you! Really appreciate your time! Been super helpful! Just ordered the slate ax, will see if it works alone first and if not go for the two router method!
@official_d3nzz 3 күн бұрын
@@justinreviewsandrepairs5246just set up using this video and worked perfectly! Thank you so much, really appreciate it! Used your code and got the 2 year nord plan so you should get 3 months free 😄
@cnclive3748 9 күн бұрын
Happy New Year and thank you for an amazing guide. I have it all set up working well. I have seen some commentary online saying it would be worth also enabling encrypted DNS over TLS (Cloudflare) for privacy. I am however connecting to a company VPN and on their network they have their own domain names. When I turn on encrypted DNS I guess it can't resolve those internal hostnames correctly. Can you comment is it really even necessary to do this? I did a leaktest online and I can see in with DNS in automatic mode on both the client and server it isn't using the ISP DNS resolvers anyways, it's using a PDNS service. Thank you in advance!
@justinreviewsandrepairs5246 9 күн бұрын
It is not necessary unless your Dynamic DNS is not resolving on the Client Travel Router. Once the Client Travel Router is connected to the Server Travel Router it is using the Server DNS. The reason you might do it on the Server Travel Router is simply for speed. Cloudflare is typically faster than the DNS Servers provided by your ISP. The actual privacy recommendation is to Block Non-VPN Traffic in case your VPN fails while in use: docs.gl-inet.com/router/en/4/faq/block_no_vpn_traffic/
@mochabetty 10 күн бұрын
👏👏👏
@drewad0 10 күн бұрын
Fantastic video. Was able to get everything working really easily by following these steps. I have a question though: if we're testing this setup with 2 of the same Beryl routers (I'm using GL-MT3000s), and both of these routers are connected to the same WiFi network, will there be conflicts with them trying to use the same local IP address (192.168.8.1)? The reason I'm asking is because I've noticed that when I stop/start the VPN Client service on my "Travel" router, it can get stuck on the "connecting" step until I disable the VPN service on the "Travel" router, reboot my "Home" router acting as my VPN server, and re-enable the VPN client on the Travel router.
@justinreviewsandrepairs5246 10 күн бұрын
You can connect them to the same network for the initial setup, but after that you should keep the Client Travel Router on a different Internet connection. You won't be able to connect to the Server Travel Router while already connected to the same Internet. If you are using a Phone HotSpot to supply Internet to the travel router, make sure the phone is not connected to your home WiFi as it will often share that Internet instead of the Cell Network as intended. Let me know if you have any questions. Thanks
@BeckyPitts-u1n 10 күн бұрын
How do you install a SIM card in this tablet?
@justinreviewsandrepairs5246 10 күн бұрын
This tablet does not support a SIM card, only a Micro SD card.
@BeckyPitts-u1n 10 күн бұрын
Thanks
@MHMfp 10 күн бұрын
Silly question, but will this work from the UK? Do all isp routers support this or could it be different in the uk for uk ISP?Just want to check before i invest in the hardware! Great job by the way
@justinreviewsandrepairs5246 10 күн бұрын
You need traditional Internet, not the new shared Internet plans that share Internet with everyone in your area. Call up your ISP and ask if they support Port Forwarding or if they have "CGNAT". Some ISPs offer a "Static IP Address" option where you can be given a Public IP Address that supports Port Forwarding for a small fee. In the event you cannot get real Internet, you can still use the TailScale VPN Option on the newer routers (Not the Opal) such as the Beryl AX, Slate AX, Flint, Flint 2. However, TailScale is still in beta and requires some skill to complete the exit node setup. Happy New Year!
@AndrewLin-d5b 11 күн бұрын
Justin, thanks for the awesome video. I got everything working but weirdly for 1 of the computers everything works flawlessly. On another computer, its connected and shows my home ip address but the connection is intermittently dropping and reconnecting. When I do a speed test I'm sometimes getting "Upload Test Error" and it takes awhile to load web pages. Any idea what causes this? Also when I'm on my company vpn, my ip shows some other address instead of my home ip, which I guess is due to the company vpn. How can I tell what ip they are seeing?
@justinreviewsandrepairs5246 11 күн бұрын
If you are getting upload errors, maybe the connection between the two routers is not adequate. Do you have Fiber Optic Internet at home? You can use a personal device to see what your IP Address is. Your work device will show a different UP Address because you are connected to their VPN in addition to your own.
@AndrewLin-d5b 11 күн бұрын
@@justinreviewsandrepairs5246 When I use my personal device, I do correctly see my home IP, but this is also the device that drops intermittently and has the upload errors. But using my work laptop, it shows the different IP address but it doesn't have any connection issues and works perfectly. Is there a way to confirm what IP address the company sees from their VPN? Home network is Fibre
@FatalistCatalist 11 күн бұрын
you look like you're a captive yourself
@adewale3157 11 күн бұрын
Hi Justin, compliment of the season and happy new year in Advance. Just a quick question for you - do we need to open DMZ port on our home router?
@justinreviewsandrepairs5246 11 күн бұрын
Every ISP router is different, but in general you should only open port 51820. If your ISP router is garbage, then DMZ would be another option. Happy New Year!
@adewale3157 11 күн бұрын
@@justinreviewsandrepairs5246 I'm having issue on port forwarding on AT&T router for the AX1800. I have setup couple across of AX1800 and AXT1800 across the continents and they are working fine, but with this particular AT&T router. I have spent three days on it without successful. Happy new year!
@Tech_savy 12 күн бұрын
@justinreviewsandrepairs5246 Thank you for sharing this valuable knowledge! I’m looking for advice on how to improve the speed of a client VPN connected to a home VPN (WireGuard server). The setup uses two Beryl AX routers, with the travel router situated 5,000 miles away from the home VPN server. Currently, the client VPN speed is very slow at 20 Mbps, which makes video calls challenging, even though the home ISP's upload speed is 50 Mbps. How can I optimize the client VPN speed to match the 50 Mbps upload speed? Please provide step-by-step guidance. Specifically, should I adjust the MTU value on both the server and client sides, or just on the client? How can I determine the optimal MTU value? Additionally, what steps should I take to troubleshoot and resolve the slow VPN speed issue to achieve better performance?
@saurabhshubham7345 12 күн бұрын
Can I use 2 Opal routers for both at home and trave?
@justinreviewsandrepairs5246 12 күн бұрын
You can, but keep in mind the performance of the Opal is very low. It is also on the older Version 3 firmware. Getting two Beryl AX would be more money but you would get much more performance out of them as well.
@systemout-b6i 12 күн бұрын
my isp router(NOT Gl.iNet) has a fixed IP and wireguard so I can configure as a vpn server. Will Gl.iNet router work as a vpn client even though the server is from another brand? no need for need for port forwarding right?
@justinreviewsandrepairs5246 12 күн бұрын
Yes, GLiNet is using standard WireGuard ®️ so you can connect to any WireGuard ®️ Server that is also following the specification. The Port Forwarding likely isn't necessary for your ISP Router if it is running the Server, but you likely still need to connect the Client Travel Router to a second Internet connection to connect (if trying to test from home, use a HotSpot that is not connected to your home WiFi)
@miguelpetrarca5540 13 күн бұрын
Why would we need to enable DDNS on the server router and use that ? wouldn't DNNS apply to the main router that is the router exposed to the internet ?
@justinreviewsandrepairs5246 13 күн бұрын
The Server Router is the one exposed to the Internet, so the DDNS should be enabled on that one. The DDNS service is included with the GLiNet Router.
@JamesNiemir 13 күн бұрын
Wonderful tutorial! Removed the missing fin - fan blade and ordered a replacement from Amazon. Can't wait to have it working again.....Jim
@michaelleclair9655 14 күн бұрын
Hello Justin, this video is awesome! I do need your help though please... I purchased 2x Beryl AX3000s. I set one up as the server and one as the client. I tested and it worked just like in your video! ... I tethered the client to my cell phone and server to my ISP modem. I used "whatismyipaddress" and voila, I got my ISP address on my client! ... all confirmed, I boxed the client up ready for my next vacation. I guess I should have tested beyond confirming the IP address, as I had connectivity issues while away. I connected to my BerylAX and log the Repeater into the hotel's Wi-Fi network. Started the WireGuard client and got the green light. I ran "whatismyipaddress" from my browser to confirm and voila, my home IP address came up! That seems to be where the joy stops and I can't figure out why ... WireGuard traffic stats show traffic flowing in "KB", but not fast enough to load any webpages, let a lone stream anything. I'm guessing this is a latency issue caused by a setting somewhere, but no idea how to proceed. Any ideas?
@art889d 14 күн бұрын
I did the port forwarding but My vpn test doesn’t result in my ip address matching residential ip. It’s showing as the ipv4 address. How can I address this?
@justinreviewsandrepairs5246 14 күн бұрын
Is the VPN connected (green) on the Client Travel Router or yellow? If yellow, please send me the error log by clicking "View Log" My email as well as other common troubleshooting tips are here: justinpruett.com/glinet-troubleshoot.php
@josegomz2247 14 күн бұрын
i want to hide my ip address how do i do that?
@justinreviewsandrepairs5246 14 күн бұрын
Can you explain what you mean by this? You want to have an IP Address in a different country or no IP Address at all?
@josegomz2247 14 күн бұрын
what about if i want to hide my ip address
@justinreviewsandrepairs5246 14 күн бұрын
Can you explain more? Who would you like to hide from? The Internet uses IP Addresses to communicate so you will have to use an application if you truly want no IP Address.
@jitendrajoshi1456 15 күн бұрын
Thanks, Justin, for the guide and your quick replies about the network setup. You really made everything so much easier-I truly appreciate it!
@justinreviewsandrepairs5246 15 күн бұрын
Glad it helped! Thank you so much! 🙏
@JavaDevPL 15 күн бұрын
Hey Justin, I did port forwarding in my ISP part and also did WireGuard Server Config. After that DNS Test still says that IP adresses are different. I am wondering if CGNAC of ISP can affect port forwarding. And if there CGNAC which will mean my IPV4 address is not unique dynamic, what can I do? I think nowadays all ISPs use CGNAC as of IPV4 range constraint. Anyways I didn’t continue the config till the end I just tested and as DnS test was not successfull stopped
@justinreviewsandrepairs5246 15 күн бұрын
If you have shared Internet like 5G Internet then you may have CGNAT. As far as DDNS you can use the test on this page instead and there are additional troubleshooting videos there too: justinpruett.com/glinet-troubleshoot.php
@JavaDevPL 14 күн бұрын
Thank you so much!!! I will try that, one more thing if I have CGNAT I think my operator with additional cost may provide static IP, the only way I see is this. Will it work with static IP? They will give me dedicated Lan port where I can configure port-forwarding- that’s what they told me. Are there any unexpected behaviors I can expect?:) Sorry for asking too many questions and thanks so much for you reply!
@justinreviewsandrepairs5246 14 күн бұрын
Yes it will work with a Static IP Address. You can technically skip the Dynamic DNS step and use the Static IP Address, but I would still enable it and write down the Dynamic DNS address in case you ever need to recall your IP Address.
@kofiyeboah8732 15 күн бұрын
What if your apartment doesn’t have a physical router in every unit and only access code to the internet?
@justinreviewsandrepairs5246 15 күн бұрын
That is fine for the Client Travel Router that you take with you. They probably use a Captive Portal? kzbin.info/www/bejne/amfReGujndJopck But the Server Router that stays home really needs to have dedicated Internet, otherwise you likely cannot Port Forward. The alternative to that would be to use TailScale
@Airklenan 15 күн бұрын
Will the Two-Routers Setup Work with a Company Laptop Using Cloudflare Warp Zero Trust?
@justinreviewsandrepairs5246 15 күн бұрын
I don't know about that one in specific, but in general it works with every company VPN because the routers create a virtual connection back to your house. Your work computer will just connect as normal. The thing you need to worry about is exposing your location when using company apps on your personal phone which has GPS and other tracking methods.
@oliviadunn3215 8 күн бұрын
@@justinreviewsandrepairs5246 OK and at that point when using your phone for apps like let’s say our jobs vpn (global protect) doesn’t it come in into play when we scan that QR code with our phone that were now able to access the wire guard server to use our same residential ip address? Bcuz that’s the whole point for me and why I’m doing all this bcuz my job sends over my 2 step verification via phone to authenticate duo and I have to have the same ip address on my computer as well as my phone. This whole process should support and solve all of that correct?
@cynzo 15 күн бұрын
Thank you for your video! Would you recommend the Teclast P30 as a home dashboard mounted on a wall, while permanently charging it? I was wondering about the power usage, fast charging is of no use for me in this case.
@justinreviewsandrepairs5246 15 күн бұрын
I have not tried leaving the screen on 24/7 but for safety reasons I would probably go with the Samsung because you have better control of the battery. Leaving things plugged in 24/7 at 100% charge typically results in the battery swelling. I believe you can reduce the charge percentage to 60% on the Samsung to extend the life of the battery. Otherwise the performance of the tablet is great.
@systemout-b6i 15 күн бұрын
I heard that Advanced IT departments equipped with Deep Packet Inspection (DPI) technology can detect and analyze the WireGuard packet headers within your traffic. do you know to get over that?
@justinreviewsandrepairs5246 15 күн бұрын
Since the company typically has full control of your computer, they could do something like this to determine the trace route is different, but since the VPN is on the Travel Router they won't be able to see the middle part of the transaction. It would still be a level of speculation on their part.
@systemout-b6i 15 күн бұрын
I have heard that Advanced IT departments equipped with Deep Packet Inspection (DPI) technology can detect and analyze the WireGuard packet headers within your traffic. any idea how to get over that?
@justinreviewsandrepairs5246 15 күн бұрын
Since the company typically has full control of your computer, they could do something like this to determine the trace route is different, but since the VPN is on the Travel Router they won't be able to see the middle part of the transaction. It would still be a level of speculation on their part.
@karenWyRecords 15 күн бұрын
$44 dollars for this tablet?? That's so cheap!!
@justinreviewsandrepairs5246 15 күн бұрын
But there are some major issues to keep in mind, which is why I ultimately spent a bit more money for the $70 Teclast P30 kzbin.info/www/bejne/sGWnaKmlhKephKs
@BOBService417 16 күн бұрын
Awesome video. May I get your shipping address to send an invitation?
@oak415 17 күн бұрын
Solid white light after a system update
@justinreviewsandrepairs5246 16 күн бұрын
You may need to update the firmware manually if it failed. The factory reset does not revert the firmware version.
@oak415 15 күн бұрын
@ no idea how to do that . Bought this for the simple plug and play feature not become entrenched into tweaking and overclocking
@justinreviewsandrepairs5246 15 күн бұрын
It is simple... If it works... Unfortunately the flashing process is a bit complex and requires you to download the file from their Telegram Group: kzbin.info/www/bejne/omKkpmx3bsdgnJo If you are willing to sell it, I would be interested in making a video about it.
@oak415 15 күн бұрын
@ darn already returned it. Maybe if I brick next one
@justinreviewsandrepairs5246 7 күн бұрын
😆 I hope you don't brick the next one!