flash bios with new version .. power one with battery the bios update it will work
@RenatoApazaMeza9 күн бұрын
why !! broke the screen !!
@RenatoApazaMeza9 күн бұрын
?? keyboard = FIX, screen = Broke
@firmbutton648512 күн бұрын
Dielectric grease in those sockets will stop any further damage. It’s waterproof and made for electric connections.
@paraplegicbradleyschubert132812 күн бұрын
Hey mate, the problem is that the hinges get full of lint and dust and they get tight to move the hinges causing them to break away from the weakest part which is the back of the screen. I noticed that you didn’t clean the hinges or lubricate them or try to fee them up. If you had one like mine that are very hard to move the hinges, how would you free them up and what lubricant would you use? I’ve particularly freed mine up using electrical silicone grease but I’m thinking of using spray graphite powder and before I tried it I wanted to get your advice on using graphite on a laptop
@bazy198314 күн бұрын
Did the keyboard suffer from flexing after the fix?
@Brondo76517 күн бұрын
This is insane, Apple truly embraces "anti-consumer" straight down to the 3000 screws needed to undo this monstrosity.
@jettjamieson771220 күн бұрын
Where can u buy the screen replacements from
@herrlube329923 күн бұрын
Thank you very much Master
@mty226427 күн бұрын
I got the same problem in my hp envy x360 after 14 months of use. Thanks for the detailed explanation.
@user-ky3qr3ng3o28 күн бұрын
My s20 plus is currently turning on but screen dont touch, even when it was repalced with new screen , can you help me with the schematic jump diagram so i can jump my to touch working
@jyfuxcАй бұрын
When I removed the motherboard I thought I was about 80% done, but was a little confused by the battery seeming to be stuck to one side of the keyboard, so I found this video.. OMG now I seem to be only 5% done.
@okbastorm2996Ай бұрын
nice job
@takomon7Ай бұрын
I have a macbook retina 12 inch, does replacing the LCD flex cable help?
@mobilemaintenance1Ай бұрын
lol
@brianhollon178Ай бұрын
MacBook Pro from year 2015 will this work too?
@tiununo3547Ай бұрын
Did you use short kills?
@ApplefixCoNzАй бұрын
Yes
@SaminRahmanАй бұрын
Wqw
@SaminRahmanАй бұрын
Tfqsssy5v
@SaminRahmanАй бұрын
1qse
@SaminRahmanАй бұрын
1tygggLP AS
@SaminRahmanАй бұрын
Qwe
@SaminRahmanАй бұрын
1w2s
@SaminRahmanАй бұрын
Qasawioa qui qh8 🥨
@billyngarotata4427Ай бұрын
Asalam walaykum ...MashaALLAH brother, thank you for the repair have subscribed
@The_Texman2 ай бұрын
You're an a - hole! Last 2 seconds play loud music!!! WTF!!! Scared the hell outta me.
@nissmagie72722 ай бұрын
How much voltage did you inject with 2 amps To kill the short please?
@teslasapple2 ай бұрын
V = I x R
@nissmagie72722 ай бұрын
@@teslasapple so...1V?
@teslasapple2 ай бұрын
@@nissmagie7272initially the resistance reading was 0.3 ohms so more like 0.6 volts. 1 volt would be okay though…just limit the current carefully with the Power Supply. What you don’t want to do is burn the traces before the cap pops…that would be very bad. Safer to go get the cap manually
@TheDefpom2 ай бұрын
I have seen voltage regulators in iPhones to run the camera that look the same as that part, so it could be one of those to run certain parts of the phone.
@ApplefixCoNz2 ай бұрын
Yes, I thought so when I took it out..
@Tuan-ct2 ай бұрын
24:49 yes ok❤
@smartfisher2k62 ай бұрын
I see you don't answer your post. Iveas going to ask a question but by reading I guess not.
@shay7522 ай бұрын
where do i found a screen for my Retina 5K, 27-inch, 2019?
@gillibabex2 ай бұрын
Wouldn’t want him fixing anything of mine the item was banged about with very little care and attention
@georgi.nakovv2 ай бұрын
what glue are you using?
@julia.ludwig2 ай бұрын
I believe it's epoxy glue.
@proofza20092 ай бұрын
what boardview system are you using??
@user-ri8te3xl1g2 ай бұрын
Yeah!
@arkadiuszmazur53862 ай бұрын
Can these symptoms (no USB power, non-working hard drive) cause a BLOD? I also cannot run safe mode (no second beep). Regards.
@gdsbrar3 ай бұрын
Hi, we've encountered the same issue with our HP envy 360. I was wondering how much it would cost to get it fixed. Much appreciate your earliest attention. Regards.
@atiaafros88552 ай бұрын
Can you please share the model with serial number?
@julia.ludwig2 ай бұрын
I can tell you that the hinges kit cost €80 and €110 with shipping. The hinge caps kit cost an extra €80. I'm praying I can save mine.
@amobidaniel50483 ай бұрын
Pls what will I do to it
@amobidaniel50483 ай бұрын
After changing the ic mine do not charge
@Read_Relax.3 ай бұрын
how did you confirmed? what about the EN1 ? did you get EN supply
@SnowyFoxOfficial3 ай бұрын
ah yes say xbox one x and then show a xbox series x like they are the same when they are not.
@RedMissileGaming3 ай бұрын
I just did the HDMI port swap on a PS5, but still no display. What should my next step be?
@jp16613 ай бұрын
Sir lenevo it8586e is short ! Direct install new ic ? Chak properly components
@mahmoudalselesly17243 ай бұрын
Is ps4 hdmi encoder compatible with ps5? If yes...will ps5 lose 4k 120 fps ?
@RedMissileGaming3 ай бұрын
no PS5 games run 4K @ 120FPS. lol
@rajendrabiswas3 ай бұрын
pls help me .. I have tried cleaning but still it fluctuates sometimes in connectivity ..can Indian summer heat do this to the aripods max
@21SavageGang3 ай бұрын
Where can I get the black sticker used to cover the soldered area back up? Or what is it called?
@andyvandamme22003 ай бұрын
Apple should get sued for things like this, no ecological value and a big waste of time for a simple keyboard replacement multiplied by millions of technicians around the world, imagine the cost and time waste at global scale for such models, striking from Apple.
@jk.nandhini7863 ай бұрын
A1709 Logic PCB?🙂 Hi sir ,namasthe ,am from india.I want to buy this one?where and how can I order
@aakashsinghrajpurohit95764 ай бұрын
Ty sir
@tsura-4 ай бұрын
what settings were your hot air gun? i cant get the solder to flow
@angelmoreno66494 ай бұрын
brother, I need your help, I have an imac a1419 (2014) that drives me crazy, it does not provide audio, the strange thing is that it does provide audio when the machine starts, once the system starts, it does not do so, it does not detect any device, except one that says digital output, I have already ruled out the system, I already changed the headphone jack, I measured if voltage was reaching the codec, and if it did, (just in case I replaced it) and the problem continues, I no longer know what to do, thanks in advance .