Asus laptop V551L Dead | No Power | How to Reset BIOS | Laptop repairs hamilton New Zealand

Asus laptop no power drawing .020 Amps, But turn out to be easy repair just bios reset | lucky today. Visit us @ 125 ward street hamilton new zealand or call 078394111
Steps to reset BIOS to Defaults by disconnecting the CMOS (Complementary Metal-Oxide-Semiconductor) battery
Resetting the BIOS by disconnecting the CMOS (Complementary Metal-Oxide-Semiconductor) battery is a common method to clear BIOS settings. Here's a step-by-step guide on how to do it:
Turn off the computer: Ensure your computer is completely powered off. Shut it down through the operating system and wait until all lights and fan noises stop.
Disconnect the power source: Unplug the power cord from the back of your computer or, if it's a laptop, remove the battery. This step is crucial to prevent any electrical damage during the process.
Open the computer case: If you're working on a desktop computer, you'll need to open the case to access the motherboard. Usually, you'll need a screwdriver to remove the side panel. Be cautious of any static discharge; it's recommended to touch a grounded metal object before handling any internal components to discharge static electricity.
Locate the CMOS battery: The CMOS battery looks like a large watch battery and is usually located near the center or bottom of the motherboard. It's typically a silver disk held in place by a small clip or bracket.
Remove the CMOS battery: Carefully use your fingers or a small flat-head screwdriver to gently pry the battery out of its socket. Take note of its orientation as you'll need to put it back in the same way later.
Wait: After removing the CMOS battery, wait for at least 5-10 minutes. This allows any residual power in the motherboard to dissipate, ensuring a complete reset of the BIOS settings.
Reinsert the CMOS battery: Place the CMOS battery back into its socket, ensuring it's properly aligned with the correct polarity.
Close the computer case: Once the battery is reinserted, put the computer case back together and secure it with screws if necessary.
Reconnect the power source: Plug the power cord back into the computer or reinsert the battery if you're using a laptop.
Power on the computer: Turn on your computer and wait for it to boot up. The BIOS settings should now be reset to their default values.
Remember that resetting the BIOS will revert settings to their defaults, including any custom settings or overclocks you may have configured. You'll need to reconfigure these settings after the reset.
We specialize in logic board and liquid damage repair and can fix your Laptop, MacBook, mobile phone , ipad, iphone , tablet , playstation, xbox or any other electronic gadget that has been deemed unfixable by another repair shop.
*Have a repair shop and are looking to outsource logic board repairs? We offer discounted repairs to other repair shops, schools, large organizations and government agencies. - applefix.co.nz...
logicboard repair course in New Zealand
Skill development Job Oriented short Training course. In Latest Gadgets, Smart Mobile Phones, Tablets, Laptops, Desktops, gaming gadget, Playstation, Xbox Repair Technology.
This course is aimed / focused, to teach you to fix most common repairs an electronics repair shop could face in a practical working environment. Start your own business or increase your chances to get job quickly. applefix.co.nz...
Mail in device info read here applefix.co.nz...