Пікірлер
@djchaud5444
@djchaud5444 10 күн бұрын
DEFINITELY I BEEN LOOKING FOR A VIDEO LIKE THIS FOREVER. I appreciate and show you what I was able to come up with
@TwinPeaksDJ
@TwinPeaksDJ 14 күн бұрын
to my ears: the AT-XP3 is warmer, perhaps a little more subdued whereas the OM Pro S definitely has a slightly more punchy sound in the mids, if a little more clinical sound. I prefer the AT-XP3. Great video has definitely helped me make up my mind, thank you
@emkplayboy6
@emkplayboy6 16 күн бұрын
I cannot get Phase to work with Traktor Scratch 2, but I am trying to use the Pioneer DJM-S5 so that is more compatible with Serato DJ Pro. But the sound card should work?
@XFaderz
@XFaderz 16 күн бұрын
Wzup emkplayboy6, if I'm not mistaken, TS2 was locked to Traktor DVS hardware. Traktor Pro 3 unlocked the capability to use the internal soundcard on third-party hardware. Phase should present the timecode signal via the soundcard in your DJM-S5 to enable functionality. I hope that helps. Best of luck.
@johnnyd3195
@johnnyd3195 17 күн бұрын
Please Answer! Will this work on a new XDJ-AZ or OPUS-QUAD?? I would really like to know if either one has Fader Start as well.. Can this hidden utility menu be found in the service manual of either one of these newer models? If so, how is it accessed ? Thank you so much for this amazing video! 😊
@XFaderz
@XFaderz 16 күн бұрын
Wzup johnnyd3195. Unfortunately, after reviewing the manual, I do not see any indication that the two controllers have the "Fader Start" feature. I would recommend visiting your nearest Guitar Center and trying it if they have a demo unit, but the chances are slim that they implemented the feature and did not label it on the device or mention it in the manual. Best of Luck.
@Anonymous74GR
@Anonymous74GR 23 күн бұрын
good evening so for the sound I used my Pioneer Dj HDJ-X10 D headphones the quality from the Rane Seventy-Two mixer it really sounds very clear crystal clear this is the truth now for the Pioneer DJM-S11 its sound sounds a little bit cloudy this is the truth
@b.7811
@b.7811 Ай бұрын
this aint working at all. Doesnt pop up as "preview" or "new file name"
@jonlawrance8383
@jonlawrance8383 Ай бұрын
I just got the rane four and am having issues with what sounds like a delay effect being applied when I move channel 1 fader. Also does it with the crossfader. I don't know what I've done
@SteveMartinUSA
@SteveMartinUSA Ай бұрын
How do you set a rating of 1-5?
@rozzville
@rozzville Ай бұрын
I had this controller for about 2 days. I quickly learned that the USB port had issues. In stand alone mode (my main reason for wanting the controller) it failed every time. Distorted audio, skipping and jumping. Plus all the flaws you mention here. Ultimately this controller was a rush to market way too early. Have you ever heard of the Gemini SDJ-4000? Look that up and see how it never hit the mark. So much so, there's not much content on the device.
@marka.flores1097
@marka.flores1097 Ай бұрын
how do you reload? on my cdj I could personallyloop the intro and outro. I would get to my spot pause and hit the intro then get to the end of the loop pause then hit the outro button. I'm trying to do the same on this Rane and can't seem to do it
@dakthroned
@dakthroned 2 ай бұрын
sorry to necro this but , i am facing an issue lately with the album cover art that is not showing for any of my albums , and sure i can downloand and save the cover photo on the same folder as the mp3s but how can i make the cover art show on them? or if there a way to solve that issue with tagScanner not displaying the cover art that would be great
@RiotGrrrlMeg
@RiotGrrrlMeg 2 ай бұрын
Good video to stumble across since I'm looking at some of these styli. Right away I could tell the AT sounded "flatter" than the OM Pro, which I preferred. And yes, the OM looks ridiculous on a typical home turntable setup lol. Any suggestions for an AT that has a comparable profile to the OM Pro? Setup: Hitachi HT-460 Direct Drive, Ortofon headshell, Grado Prestige Green 3 cartridge/stylus. I previously used an AT3600L budget cartridge which sounded fabulous but longevity was terrible. The Grado is nice but the output is VERY quiet.
@EvanLennon-m5v
@EvanLennon-m5v 3 ай бұрын
Romaguera Terrace
@mjbboyce
@mjbboyce 3 ай бұрын
Thank you for this my friend. Decided to go digital a couple of years and treated myself to ddj-1000 for a milestone birthday. Well... talk about trying to fly the Starship Enterprise. Am completely lost and still have no clue what half/most of the functions do...but this is a start! Who knew there was a shift key? 😂
@PhilemonMortimer-q6o
@PhilemonMortimer-q6o 3 ай бұрын
Brown Jessica Miller Edward Rodriguez Mark
@lukasicheroli
@lukasicheroli 3 ай бұрын
Do you know if it is possible to do a B2B using the rear and front USB port? It's always cool to play with someone else and everyone has their own setlist. Does the device allow you to use music from two sources at the same time?
@rustyfritz7743
@rustyfritz7743 4 ай бұрын
Imma start using my maschine jam to have a friend vj my bands shows. These things do operate soundswitch well
@Sansons
@Sansons 4 ай бұрын
thank you very much for the information, to enlighten me 👍
@bboymac84
@bboymac84 4 ай бұрын
I suggest SKAA
@DJRich303
@DJRich303 4 ай бұрын
where can i find or how do i make samples to say dj rich or where i can find samples as ones like "how we do?
@luisespinozas.9666
@luisespinozas.9666 4 ай бұрын
Hola, tengo un problema, descargué e instale Controller Editor puedo asignar colores etc, pero en SoundSwitch no me aparece el dispositivo midi, alguien conoce una solución o que estoy haciendo mal?
@oldstyleanalog6459
@oldstyleanalog6459 4 ай бұрын
Ur turntables are bad ass
@bobtheman1
@bobtheman1 13 күн бұрын
It's too bad they are discontinued.
@oldstyleanalog6459
@oldstyleanalog6459 4 ай бұрын
.u get what u pay for.I heard more negatives than positives.Get a pioneer djm 450 with good effects serato pro and Done
@Markybhoy7
@Markybhoy7 5 ай бұрын
Thr back USB was noted on the Gemini KZbin review of this was to run another cdj wasn't said it was for storage of music.
@XFaderz
@XFaderz 5 ай бұрын
Wzup Markybhoy7. Thanks for checking out the video. Take a look at the following video...Start from 0:52 kzbin.info/www/bejne/hJu6eq2whNSXZpIsi=zAc5HU9xxpV2r29S Do you currently have one, or are you considering purchasing one? What's your thoughts about the unit? Thanks.
@michaeljones7192
@michaeljones7192 5 ай бұрын
how do you use search ? couldnt get it to work
@DJSnafu
@DJSnafu 6 ай бұрын
Great video - wanna see the ATXP7, Orttofon VNL and the V95ML vs Shure/Jico. Thats my final list haha
@nickibanex8085
@nickibanex8085 6 ай бұрын
Bro how do you put the crossfader curve up ?
@dungeonloud
@dungeonloud 7 ай бұрын
Was able to outfit my DJ 202 with the mini innofader plus s with little trouble thanks to your video. Much appreciated.
@ventilate4267
@ventilate4267 7 ай бұрын
Yeah, that explains it 🙄. After spending hours trying to figure out what I was entering wrong on the credentials field, I realized that looking up a video where someone successfully manged to do this would help. Thanks.
@slayzzee9162
@slayzzee9162 7 ай бұрын
This contoller is complete junk in standalone it keeps freezing-up when connected to a laptop you cannot use effects this is the worse investment i ever made.
@OneBadAssDJ
@OneBadAssDJ 7 ай бұрын
Waste of money getting battery powered anything. Just buy an electric generator.
@DalPalWXMan
@DalPalWXMan 5 ай бұрын
What? No. I have a solar-powered generator\battery, which holds 3600 Watt hours. It also charges via AC. A gas generator is cheaper, but then I have to buy gas and I can't run the gas generator inside. And a gas generator is usually louder. I also have a pure sine wave coming out of my battery.
@CTSpeed413
@CTSpeed413 8 ай бұрын
5:47 you made me yawn because it sounded like you were fighting yawning. That’s okay though because due to your detail, I liked and subscribed. 😊😊😊 Update, I agree with, in that I like the way you review. Thorough and clear. Up up date Well done I wanted one, still kinda do…
@truestory2227
@truestory2227 8 ай бұрын
300watt hours means in theory if you’re pulling 50watts continuously no more no less you would have less than 6 hours at that volume. However music is tricky, if you play Kenny G music then it should last for at least 5 hours if you’re playing high energy music like Excision then maybe it would last 2-3 hours.
@stefanalcaza5558
@stefanalcaza5558 8 ай бұрын
Hi there, when I hit export the album cover is not present within the file, what am I doing wrong? Thanks and great video!
@andrewsmatt9042
@andrewsmatt9042 8 ай бұрын
Nice review i want to ask i have two ld icoa 15 a active and what your opinion for 500watt power station
@DJMAC8202
@DJMAC8202 6 ай бұрын
I have 2 Icoa 15A tops & the 18A sub. Were you able find a power station that can handle your setup? I also use a Rane One & a Yamaha MG10XU. I need to rent something to power an outdoor gig this weekend.
@Javarrol
@Javarrol 8 ай бұрын
how do connect my headphones but hear music from the next track I want to play ... ex: playing music on the left deck but wanting to hear music on the right deck before hand...
@LordLionel007
@LordLionel007 5 ай бұрын
Press the cue button above the up fader for the deck you want. It'll light up orange.
@djsma255
@djsma255 8 ай бұрын
How long did the power supply last? Meaning how long can u playing with that setup
@tobinfox
@tobinfox 8 ай бұрын
I am just getting into this sort of thing and boy cartridges are hard to compare just looking at specs. Thank you for making this video!
@paiddpage2220
@paiddpage2220 8 ай бұрын
what pc is that just curious
@XFaderz
@XFaderz 8 ай бұрын
I believe it was the Dell XPS 18.
@innis2gbor
@innis2gbor 9 ай бұрын
Had to sell my primo that thing had problem after problem but I loved the sound card it had
@tonnewhite62
@tonnewhite62 9 ай бұрын
I like the way you reviw
@massimilianoesposito2876
@massimilianoesposito2876 9 ай бұрын
Quando paghi per questo programma grazie
@michaelzepeda5506
@michaelzepeda5506 9 ай бұрын
What do you recommend for setting tension for crossfader for scratching?
@jeffreysantner3717
@jeffreysantner3717 9 ай бұрын
What can I clean the deck chassis with? I have the tt200.
@MrFLbreakz
@MrFLbreakz 9 ай бұрын
you were a bit vague about the jumpers. im still trying to figure them out
@XFaderz
@XFaderz 9 ай бұрын
Wzup MrFLbreakz, thanks for reaching out. I created a jpg in hopes of better explaining...xfaderz.com/wp-content/uploads/2024/02/Innofader-Solder-S.jpg Essentially, the bottom set of jumpers are in the correct orientation, but the top two will need to be removed to reveal the 4 solder pads underneath. Based on the attached diagram, you can either replace the jumpers (vertically) to bridge 1-2 and 3-4 or use solder to connect the two pads. Let me know if that helps. Thanks
@MrFLbreakz
@MrFLbreakz 9 ай бұрын
@@XFaderz i appreciate that. i finally got it figured out about 20 min ago. took me all weekend but,,,,,sigh..lol
@XFaderz
@XFaderz 9 ай бұрын
Great to hear. I hope you enjoy it. 👍🏿
@MrFLbreakz
@MrFLbreakz 9 ай бұрын
lets see one for the s type :) im lost
@karaoke6861
@karaoke6861 9 ай бұрын
Hi very instructive thanks. But still one FX at a time?
@antfletcher6685
@antfletcher6685 9 ай бұрын
Really need advice about mine please 🙏
@XFaderz
@XFaderz 9 ай бұрын
Wzup antfletcher6685, I may be able to help. What's going on?
@antfletcher6685
@antfletcher6685 9 ай бұрын
Do really understand a few of these functions
@samsevan
@samsevan 9 ай бұрын
Unfortunately gemini hasn't made good quality mixers since the UMX series back in 1999 it's been down hill ever since ✌️
@WORLDofDarkness787
@WORLDofDarkness787 9 ай бұрын
if i want only the mixer to work whit my tracktor and control ( i have PMX-80)