That has to be painful, but no whimpering going about business.

JS Project Wild has the best deer videos on the internet.

That sound never gets old !!!!

Bacon and Steak flavor, how could you resist that? I would have to try that myself!😋

Thanks for the review, we've had the identical Agrifab for probably 10-15 years, I lost count. some of your points I actually like, plastic, sheet metal, etc to help keep the weight down, most of your issues that you have had I have never had like the tire issues, flimsy without the rear door on, failed rivets, cracked sheet metal etc, I do store mine in a shed which I'm sure helps. I tried the dump feature once or so and it was a complete joke. There is a video on YT where a guy doesn't use the dump but uses a tarp to remove the leaves in seconds which I plan to install this weekend. kzbin.info/www/bejne/fqranWWFiJipnck I did change my hose to 7" and added a support arm to my mower for extra hose support, my hose does not drag the ground. If I needed to replace mine I would probably still buy the same unit again and save the $700.

Spend the 150 and get the green teeth. Different as day and night. On oaks i have to slow the engine down a little because yhey cut do aggressively it makes it bounce around a bit.

Yup I have a bad influence now You. Lol.

J’ai 71 ans c’est ma deuxième fjr C’est une 2018 As boîte robotisée , une merveille , c’est confortable la boîte est précise et rapide. J’ai traversé la France en septembre 2024 en deux étapes ( je veux que ça reste un plaisir et pas une performance) Même si la France petite par rapport aux US C’était 1100 kms un vrai bonheur ❤️ J’ai ta taille je mesure 1.83 m mais je ne peux pas avoir la selle en position basse c’est trop inconfortable, j’ai les jambes trop pliées Bonne route à toi ✌️

Wish people would start putting the geographic location in the title. That wouldn't make it 8 minutes here in western NY! There'd be 10+ coons on that within minutes.

My brother is riding around on the BMW K1600, front shock is blown out, apparently it's $8k for the dealer to replace it. I ride an 05 Honda st1300, I do all the repairs myself at the fraction of the cost of that BMW.

Surprised that you didn't have any squirrels show up.

Can't believe some of the birds ran off with the peanuts in the shell. Cool video!👏👍

Those thing pack in so many leaves and they are so tightly packed in you will need a pitch fork to get them out.

I've owned both, 2007 fjr and I currently have a 2010 goldwing. Love them both. Very hard decision. I miss the sporty FJR but I love the smoothness and comfort of the goldwing for long long rides. Great video in comparison, thank you!!

BMW has odd colors.

Poor cat, maybe you could leave it some cat food.....

Sweet 👍

some Lazy cat Nuts Dumped cat they do not belong out in the wild try caring for them

That is amazing. I need one of those. Last year I raked leaves with my tractor ... it took forever and then I piled them into a big pile. I turned them with my tractor about three times over the winter. By planting time, I had pure soil which is much better than anything you will get in the store. He is a short clip of turning my mulch pile: kzbin.info/www/bejne/aJqcg6qemKyjldEsi=7HNNsiOLiqKyW8Pr

Great video!

Just bought the Chip-n-Vac, can't wait to use it with my Cub Cadet ZT1 50. My chute fits so nice after some finessing, it looks factory. Also have a 15g power sprayer with wand, and broadcast rail with 3 nozzles. Oh and I've got the remote kit for the vac which looks handy. Just wish there was a way to make changing the inlets between the deck hose and remote hose quicker. Looking into ways to do that.

THEYRE EATING IT!

Very thorough review - thank you

I sold my Agri-Fab replaced with Cycle Rake. Great move.

I sold mine and replaced with Cycle Rake. More expensive but better design.

Nice assortment of birds & critters! Love the Red-bellied woodpecker ❤. Figured you’d get an opossum, love them too❤

I would have never guessed that would happen with duck feed! Many takers.

What gear are you in on the highway? Sounds the RPM's are maxing out or like you are in 5 instead of 6

@JSProjectWild is this just the slip on, or with the delkevic headers?

I just watch this video. Now I’ve never gone over 9 k on rpm that’s pulling and faster than I needed. It was a test. Plus in the uk we don’t have the roads to be pushing silly like that where I live. I’m 100 miles from a motorway. As for shifting with no clutch I do this as well. I was out two weeks ago and was getting 57 mpg on a 100 mile round trip. Thanks again and all the best from the uk

Jakes

Amazing that a large bird can launch that fast.

Great night video Thanks! 👍👍

look into plastic welding for the plastic. They're cheap little hot guns that hold a metal staple that melts into the plastic and holds plastic together wonderfully

Pmsl I saw the short leaver at the start of your video. I had very similar on my Owen 1400 GTR mk2 and had the same thing of clutch slip. As soon as I put the larger leavers back on no problem. When you look at the push blocks on the short leaver it it pushing the piston in more leading to clutch slip. Looks lovely and worm there we have just started winter here in uk so big berther is sleeping now till snow goes. All the best from uk

I had an 08 connie with about 21k and it was run over by a semi truck. So, a week later I picked up a 2013 with about 30k on it. The 13 has all of the goodies (Exhaust, bars, bags, paint, seat) and the ECM is flashed, which like this guys says makes it much smoother. It is much smoother and I am guessing that my riding style is similar to this guys... However, I really miss the snap of my 08 Concours. it just seemed much quicker than the 13. More nimble as well, but that is a different story. I also have to add, I don't like the linked brakes. I am getting used to it, but I do love the Concours platform. Thanks for the video. Love the reviews and perspective.

Good review thanks for posting it. Lots of good points to be aware of for the larger capacity trailer I'm building for a custom 15hp setup.

Would it be less worn to do leaf collection but on the last bout of leaves, just mulch them into the yard?

This vid really shows the capabilities of that set-up. Thanks for posting!👍

Link to Trac Vac 580 vs. Agri-Fab Mow-N-Vac---kzbin.info/www/bejne/pJPLgaauaLp3nJo Agri-Fab Mow-N-Vac review---kzbin.info/www/bejne/kGGYnoJsm9iarJY Trac Vac 580 vacuuming and dumping---kzbin.info/www/bejne/kKDCkqtrfpV9n7s Agri-Fab Mow-N-Vac vacuuming leaves on 5 acres---kzbin.info/www/bejne/gZWTh3uPd8x9p7M

Hi , you shift quick wich is awesome . Do you have a quickshifter installed that operates with the clutch lever ? Thanks in advance

I have. An Agra-fab and absolulty love it I have a 25 foot hose for it,so I can park it and. clean around fences etc.

The clutch has 2 roller bearings that will fail. they're standard 6908 bearings so it's a cheap fix.

Bought my 05 Hammer going on 4 years ago. I absolutely love it. Done a few 1,500+ mile road trips, and several motorcycle camping trips on it. Great bike. I'll have it for the rest of my life. I absolutely love it.

Instead of waxing inside of container for easy leaf removal one person sprays EZ Slide Spray or silicone. Thanks for advice! Great!

Supposedly they corrected the tendency to fall in the newer models. Idk which year that would be. I have a 2014

Thanks a lot !! I live in France where I just bought a machine with the same set of teeths and could not find any info on how to sharpen them

me gusta ese sonido en su moto, tiene mucho ingenio para haber hecho eso a sus escapes. en verdad me gusta. la semana pasada me compre mi primer honda goldwing 1800 , esta modificacion me gusta para hacerla leste fin de semana, yo solo habia manejado kawasaki zx7 750. pero esta honda goldwing es un mounstruo. mi moto es 2002, 20.000 millas, 1800 cc, muy bonita. Gracias por este video, lo seguire en sus otros videos. suerte.

Agri fab is trash. Everything I seen from them is garbage.

I usually make a pass over the leaves to mulch them once and then vacuum. Cuts the number of loads down by 1/3 at least