ZRBLogic

Пікірлер

@moregomie3336 25 күн бұрын

the video helped a lot appreciate if

@JonVerkitus Ай бұрын

I'm looking at 18x9.5 +38 on 235/45 18's, you think I'll be good with 5mm spacers in the front? I'm on stock suspension as well

@JonVerkitus Ай бұрын

At first I was worried about 9.5 being too wide but I'm really trying to consider tire size now

@ttvdeadshooter8072 Ай бұрын

Holy vrap I didn’t put it in reverse and don’t know what to do

@ttvdeadshooter8072 Ай бұрын

Holy crap

@Besim.Muftiu 2 ай бұрын

those 2 caliper mounting bracket bolts were a b****

@manfred5597 2 ай бұрын

Thank you for help. It looks so much better. ;-)

@alexhernandez9064 3 ай бұрын

What are the new brake pads?

@sidemen4moments 5 ай бұрын

Hey, im lookin to get the exact set of wheels and specs - did you only need the spacers cause your car was lowered? if so do I need spacers if my brz is stock height?

@zrblogic5634 5 ай бұрын

Sick bro! I love these wheels! It’s the stock struts that will give you issue. You’ll need spacers with the stock struts.

@sidemen4moments 5 ай бұрын

@@zrblogic5634 aight so did you get 5mm spacers?

@zrblogic5634 5 ай бұрын

@@sidemen4momentsyes

@sidemen4moments 5 ай бұрын

@@zrblogic5634 btw did you need to buy longer lug nuts or were the original ones fine?

@zrblogic5634 4 ай бұрын

@@sidemen4moments no spacers give you less threads

@MannyCLopez 5 ай бұрын

This is the only video ive seen for the performance package brz … thanks for the helpful vid 🙌🏼🙌🏼

@ThatGuy-ci3qz 6 ай бұрын

Ive heard alot of people say "expect to rip the boot when dropping the transmission", however thats because they never take the reverse lockout off. Knowing this will save me from ruining my boot when i rebuild my clutch.

@saulespino2510 8 ай бұрын

Very informative, do you think loc tite is needed on the threads of the bolts holding the caliper?

@zrblogic5634 8 ай бұрын

I don’t think I read about anyone using it for calipers. I didn’t use it and haven’t had any issues in 3 years.

@saulespino2510 8 ай бұрын

@@zrblogic5634 Thank you for replying.

@kenny99321 8 ай бұрын

Thanks bro It very hard But I can handle it very happy 😂

@timlake3081 Жыл бұрын

cant hear a fucking thing youre saying

@mbonaddio Жыл бұрын

Thanks so much for this mate - really helped! Keep up the good work.

@troutlover8351 Жыл бұрын

Hey bro what size are those rotors I got a Bremble brake system Apparently nobody knows my fit

@yoyogomez3069 Жыл бұрын

i have to replace the rotors on my gt86 trd edition and it comes with the brembo brake package. do i have to get tha exact brembo rotor ? or can i get it from a different company ? if so which ones would fit , i would appreciate any help

@zackyan3921 Жыл бұрын

hey bro i just got the same issue like u today. i have 18 9.5 38mm and 245 35 18 for my 2020 brz and the front wont fit. so i think i need a spacer as well. my car its stock suspension and do you think 5mm is enough? thx!

@zrblogic5634 Жыл бұрын

Yeah 5mm worked for me until I got coils.

@zackyan3921 Жыл бұрын

@@zrblogic5634 i see. Thx for the reply! I’m thinking to get 10mm since my car isn’t coils 🙏

@zrblogic5634 Жыл бұрын

I wouldn’t do more than 8mm. 5mm already made the wheels poke so much. Unless you aren’t going for flush figment. 5mm will work. I was saying I used 5mm spacers without coils.

@zackyan3921 Жыл бұрын

@@zrblogic5634 got it thx! I just put everything in order! Appreciate!

@zackyan3921 Жыл бұрын

@@zrblogic5634 hey bro since the wheel shop accepted my return request. Im thinking to keep the rear size for 18 9.5 38mm and running 18 8.5 45mm for the front. Do u think that gonna work? 🙏

@lancenash333 Жыл бұрын

Thanks man very helpful

@VNN-ks3nj Жыл бұрын

What’s up bro? Hey what about the pads? I when to the link but only find the rotor

@zrblogic5634 Жыл бұрын

Looks like they changed things up since I bought mine. They did sell as a kit that included pads.

@tylermansmom08 Жыл бұрын

I found this very helpful. I have a 2011 Kia Optima with 6 speed manual transmission & I want to put a custom knob on her. By myself. Thank you for sharing this.

@trippyneega 2 жыл бұрын

so i just did this but i can’t go back in reverse for some reason, any advice?:/

@zrblogic5634 2 жыл бұрын

Only thing I can think of is if you took the pin out while it was not in reverse. you wouldn’t have been able to get the pin back in though

@bond3161 2 жыл бұрын

Mine didn't even have a pin!!!! Wtf Wait.. mine wasn't in reverse, so did something fall through?

@georgepapasgr Жыл бұрын

He literally said in the video to put it in reverse so the pin cant fall of :( I hope you could after a year fix it :)

@bond3161 Жыл бұрын

@@georgepapasgr nah it was there all along My screw driver wasbt big enough to poke the pin through It went in between lolll

@georgepapasgr Жыл бұрын

@@bond3161 ohhhh hahaha

@bond3161 Жыл бұрын

@@georgepapasgr even if it falls.. it doesnt fall all the way You can get two screw driver or something to pinch it together and drag it back up by the sides Dont ask me how i know

@georgepapasgr Жыл бұрын

@@bond3161 hahaha seems like someone had the experience already :)

@baely4272 2 жыл бұрын

Have you got any issues with rubbing on the inner wheel welll, cause i have 18x9.5+40 with lowering springs on the front and the wheel rubs against the guards, any issues like that as i noticed you didnt rotate the wheel whilst test fitting?

@zrblogic5634 2 жыл бұрын

No issues with +38 off set. Been driving with them for a year now on lowering springs

@dan0acuesta733 2 жыл бұрын

dude thank god you made this video! there’s so little information on the Brembo version like tS. I’m doing the same job right now on my car

@zrblogic5634 2 жыл бұрын

I know man! Exactly what I was thinking when I was trying to work on mine. Glad the video helped!

@gladysvargas7908 2 жыл бұрын

Im scared to ruin something 😅 does the pin like click into place? Or do you just have to put it back and hope it works? 🥸

@zrblogic5634 2 жыл бұрын

Once you get the pin back in you just check to make sure the reverse lockout is engaging. It wasn’t too difficult.

@chriscuthbertson 2 жыл бұрын

Why do people run such a wide tyre on the front of a RWD car?

@zrblogic5634 2 жыл бұрын

It’s not just about getting traction when launching. I know that a lot of Brz/frs/86 owners want a square setup but also want wider tires for better handling. Going staggered means you can’t rotate and definitely changes the feel and handling overall.

@mcmac9565 Жыл бұрын

@@zrblogic5634 yes..this car was meant for a square set up.

@nickmacias5776 2 жыл бұрын

do you think 18x9.5 +22 offset would work with a 255/35 tire on stock struts? dial in some -4°ish camber ?

@zrblogic5634 2 жыл бұрын

I see most people with that size and offset run 225/40s. Not sure about 255/35

@seanp5517 2 жыл бұрын

What size bolts did you use to take the rotor off?

@zrblogic5634 2 жыл бұрын

I believe I mentioned it in my front rotors and brakes change video. I don’t recall tho

@dan0acuesta733 2 жыл бұрын

M 8 x 1.25 was what he says in the Front Rotor video! for anyone who might come back to this comment

@KenDoit 2 жыл бұрын

is that the right rotation for the rotors? www.cquence.net/blog/how_to_properly_install_performance_brake_rotors/

@jordanprior3629 2 жыл бұрын

Hey man I just test fit my rims, any chance I can send you a pic somewhere to see how it matches up with your test fit?

@zrblogic5634 2 жыл бұрын

Nice! Yeah man what’s your Instagram? I’ll DM you

@jordanprior3629 2 жыл бұрын

@@zrblogic5634 it is my full name and 389 at the end

@mresab1997 3 жыл бұрын

Hi, thanks for the great tutorial. How much did you torque the new rotor down to? Thanks

@zrblogic5634 3 жыл бұрын

The rotors just fit Over the lug stud and once you put the wheel on you torque the wheel to normal specs.

@MAGA2024. 3 жыл бұрын

Just did it and wanted to say thanks

@zrblogic5634 3 жыл бұрын

Glad the video helped!

@kopyking37 3 жыл бұрын

Great in depth video

@zrblogic5634 3 жыл бұрын

Thanks for watching!

@saulespino2510 3 жыл бұрын

Great looking wheels, I have a BRZ with the performance pack too and the stock wheels are 17 x 7.5 . Mine are silver but your stock ones look way better than mine.

@zrblogic5634 3 жыл бұрын

Thanks man! Yeah mine were painted black. Pretty cool look. I would have loved to keep them but I needed a wider tire

@jordanprior3629 3 жыл бұрын

Did they not fit at first because the tire size or because the rim size? I was looking at this rim spec but with 235 size tires

@zrblogic5634 3 жыл бұрын

It was the 255/35 tires that hit the stock strut. The wheels were still really close but cleared without tires. Not sure how much smaller you would need to go to make sure the tires don’t run that stock strut.

@jordanprior3629 3 жыл бұрын

@@zrblogic5634 ok thanks, I was going to go that rim spec with 235/40. I heard some people had it fit. All of the research I have done and I'm still unsure lol

@jordanprior3629 3 жыл бұрын

I would assume that as long as the tire doesn't bulge over the rim then the fitment should be good? It would stretch the tires a bit but I assume the fitment works.

@zrblogic5634 3 жыл бұрын

Yes sounds like it should work. I did all the research I could and still came up short but hopefully that works out of it stretches a bit.

@adrianvarela2495 3 жыл бұрын

@@jordanprior3629 i’m looking at some 235/45. did you get yours to fit?

@600miles 3 жыл бұрын

To make pin easier to go back in use a correct size drill bit as a pilot tool to line up the holes and grab the roll pin in vise grips to just start it. Then use giant size channel locks to squeeze the pin back in (tape or rag to protect sleeve. I wouldn't be hammering on the shifter, ever. Same thing with pin removal push the roll pin through a small 1/4" drive socket and maybe a blunted 8D nail. I am going to be making a new shift knob and that lock out sleeve on my lathe, manual machining.

@zrblogic5634 3 жыл бұрын

Nice

@600miles 3 жыл бұрын

If you rotate your tires, it's a scam by the tire manufacturers to sell more tires. Makes you buy 4 tires at a time instead of 2. More important on an AWD Subaru where they need to all be similar diameters.

@zrblogic5634 3 жыл бұрын

I rotate so they wear more evenly. The front tires tend to wear faster on the edges and the rear in the middle. I suppose if only two are worn down to the point of replacing I could just buy 2 instead of 4 haha but I’m still gonna rotate because I have a square setup and want the tires to wear evenly.

@jorged8169 3 жыл бұрын

I was using Pennzoil until 6 months ago that I start using 8100 Eco-Lite, the engine feels so smooth and the difference in mpg is good. I also have the valve is a time saver 🙌

@zrblogic5634 3 жыл бұрын

Interesting. Good to know! I’ll have to look into that

@jorged8169 3 жыл бұрын

@@zrblogic5634 I buy the oil on Amazon.

@insidethemusic8673 3 жыл бұрын

I've been looking into Pennzoil as well. Seems like one of the better oils.

@zrblogic5634 3 жыл бұрын

Definitely!

@b48889 3 жыл бұрын

Thanks for the videos!

@zrblogic5634 3 жыл бұрын

Glad you enjoy them!

@donayre21 3 жыл бұрын

I am swapping mine for the first time. Any tools recommendations or stuff I should look out for since I am doing this in a parking lot

@zrblogic5634 3 жыл бұрын

The first time always takes longer than expected. At least for me it did. I did it a while back but the video should go through all the steps. Can’t think of any unmentioned tools. Beside just having a hard time with certain bolts coming lose it’s pretty straight forward following forums and this video. Good luck!

@donayre21 3 жыл бұрын

@@zrblogic5634 I think you slightly mentioned it while you were working on the back rotors and break pads. I also saw you had a dewalt ratchet. I am some what in a budget but would you recommend a dewalt ratchet & socket set fort he work? would it have all the sizes I need?

@zrblogic5634 3 жыл бұрын

I definitely was on a budget as well. The dewalt set I got from Amazon. One of the cheaper ones for sure. I think I had to buy a separate set of larger sockets as well but you can find those at any auto store for pretty cheap. I would just google the process on forums. You can usually find very in depth DIYs. I think that’s where I found more info that helped when I was doing it.

@saulespino2510 3 жыл бұрын

I have a 2018 BRZ with the performance package and was wondering what are the advantages of replacing the stock rotors?

@zrblogic5634 3 жыл бұрын

Daily driving there’s really no advantage. Different rotors can benefit break performance when tracked though.

@saulespino2510 3 жыл бұрын

@@zrblogic5634 Oh ok, thanks for your reply

@fahamysahir3738 3 жыл бұрын

What spec tire u use?

@zrblogic5634 3 жыл бұрын

The tires are continental Extreme contact DWS06 255/35

@kirauno 3 жыл бұрын

damn I have 18x9.5 +43 offset with same tire specs and mine rub the strut a bit and it carved out the tire created a ring around the inside's sidewall. Not too deep tho

@zrblogic5634 3 жыл бұрын

Dang yeah that’s rough. That’s what I was afraid of with mine. Thankfully I just rotated my wheels and they all looked good so the spacers have been working.

@kirauno 3 жыл бұрын

@@zrblogic5634 yeah I took it to the shop and fixed it though. Did you fix the front poke? Mine also poke a bit

@zrblogic5634 3 жыл бұрын

Until I get coils I can’t do anything about that unfortunately.

@o5you86 3 жыл бұрын

So you’ve got 18 x 9.5 + 38 on a Stock Suspension, with no Spacers. So having this setup for over 4 Weeks on a Stock Suspension do you think that you could just not get Coilovers. I reckon I could enjoy this look on my 86 GTS for a whole Year without ever getting Coilovers. Years ago I had a 300zx with a Lowered Suspension & it was a Headache parking it somewhere, going over Speed Bumps at an angle & just driving it around lowered on really SHIT roads, having scrapping issues. If I could get away with Awesome Wheels on a Stock Suspension on my 86 GTS that’d be so Awesome!

@zrblogic5634 3 жыл бұрын

I do have 5mm spacers in the front. I have lowering springs as well but the stock strut is what gives the issue for clearance. Coilovers are smaller so there is more clearance for the wheel so you wouldn’t need spacers. Personally I don’t like the poke that the spacer makes and it’s still running SUPER close to the strut. and if I got coils I would probably still stay at the current ride height (same height as with lowering springs)

@o5you86 3 жыл бұрын

@@zrblogic5634 Thanks for the answer, I’ll save up & get Coilovers installed First then get the Mags Wheels & Tyres. Then after about a Year I’ll do the Rocket Bunny kit.

@zrblogic5634 3 жыл бұрын

Nice! That’ll look sick!

@danielangeles86 3 жыл бұрын

You're the first one I've seen with these wheels. Been eyeing them for months. Will probably get them. Looks great! Thanks for uploading the video

@zrblogic5634 3 жыл бұрын

Yeah man! I was trying to find videos and pictures to help me pull the trigger but there weren’t any. Im trying to grow this channel to be videos of things that I haven’t been able to find on KZbin. Thanks for watching!