Which groove on the shock is exactly 4inch lift?

Did all that and they still don’t work

I’m having this issue so will changing the gauge wire help

Mine only doesn't work on the driver side bottom. All others work.

Doesnt work on a 2018. No module under seat.

That's not a permanent solution. The exact same thing will happen again. There should be an updated Ford part to correct this.

Where can I get the pin to relocate that wire into the next slot. You can’t just put the piece of wire in there

One of the pins on the main wiring harness is burned up. Anyone know what the part number is to fix it?

So putting a larger gage wire will fix the problem?

Looks like you got it all figured out 😉

lo hice tal cual en mustang 2015 y quedo perfecto

Does each front seat have it's own dedicated module that you patched up? Or is that controller for both seats??

Thanks! Do you know where to buy that conector?

Thanks! Got an 08 Edge that's leaking from the banjo bolt. Trying the crush washers to seal it that I bought off Amazon. Wish me luck. my only problem is crawling under the vehicle doesn't give me much space to have any leverage to remove the front bolt.

How do you disconnect the plug? I been struggling to unplug it for the past hour!!

Great video..Nice truck !! ..Engine sounds so nice and the vibration I felt as if I was there insife the cabin !! ..😅😃

That's a Deadpool hole...

My truck ignition sometimes makes a buzzing sound when I try to start it , then I back off and it starts. Sound like yours was doing the same?

Thank you for the video, what are you using for the video overlay? Is it proprietary to the camera?

Couldnt hear your voice over the music at all. Sweet lookin truck though

New update vid for this! 3-4-23 kzbin.info/www/bejne/hHmZcoOEgduchtk

I have a 2015 f150. Does the module under the passenger seat control both the drivers side and passenger side? Or does each seat have its own module?

I love how every one roasting bro😭but naw he shoulda knew

Try making a Vinegar trail

It’s ok daddy has triple A for his vehicles 😂

Hay u can't park there

Put it in rice

Ever hear of 4wd?

Good video, glad I'm not the only one this happen to. mine was burnt pretty bad. couldn't salvage the pigtail pin. Any idea on a part number for a pigtail pin to attach to the wire?

Great video! This is exactly what happened to mine.

Took me 2.5 hrs to get starter out. Still not sure how I ever loosened that top bolt. Tried every combination of extensions available. Nothing wanted to work. No room up there. Almost gave up. Ground down a small socket to make it 1/8-1/4" shorter with a 6"-3/8 extension and that seemed to do the trick to loosen the bolt. Then took it out with 6'' 1/4 drive. Install was a little over and hour. When installing put a piece of tape over top hole, drill a hole in it and insert bolt. This will hold in place till you tighten it. Good luck to all that try this. On the hardness level I would rate this a 8 or 9, but still saved me around $350+ doing it myself.

nice

​ @deadpool _F150 on my f350 its the green wires that are a little melted not the black like yours, im trying to find a fuse because i changed the box, it didnt fix it, and even though the wires are a little burnt looking they are still pretty solid. i can only find a fuse for the rear seat, not the front

Wow Ford enthusiast filipino trucker’s 👍🏻

how do you disconnect the wire and plug it into the next slot? Just cut it off, strip it and shove it in there??

That same starter is $196 on Rockauto lol you got ripped off.

Everyone go watch nzdiagonatics video his is way more in depth and shows how to get the top bolt off, this video is only good for the part number… which is useless since any ford dealership can get you the right thing

Like your truck, did you customize it yourself? Changing starter on 2016 F-150, top bolt is crazy.

Disappointed you didn't show how you got the top bolt out🤷‍♂️

What tools did you use, I'm probably changing mine tomorrow 😀

love your safety shoes . Nice work

My black plug on the module would not come un plugged as it was melted to the module. My fix was to remove the back cover off the module and solder a wire to the back of the board on the corresponding ground pin, I then tapped the wire into the ground wire.

How long did shipping take?

Excellent video with great tips to help us do a repair, THANK YOU. "PowerStop Z36 calipers and the brackets are remanufactured" copied from their web site. Big bucks for someone's rejects.

How do you unplug the large black connector that you moved the ground on? Mine won't budge!

2015 F150. Great video! The same wire on mine was cooked. Fixed the wire and back in action. Thanks!

Dude what’s you do for the top bolt holy crap I’m stuck🤣

$370 is considered a "hookup"....... just asking 😕

17-18 and up done use that module. They use one module under the drivers seat.

X2 on the pigtail part number