2 ай бұрын
10 ай бұрын
Жыл бұрын
Жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
Пікірлер
@khwolter9038 Күн бұрын
Cool tool. Would probably work better, and have less of a chance to break it, if there were a threaded hole in the end of the piece that goes into the axle hole. That way one could thread in a screw with a fender washer so that the axle doesn't ride up, as in your video, while putting more force on the bead towards the end.
@DerekDualSport 6 күн бұрын
I neeeeeed it!
@hornet224 9 күн бұрын
$6142 out the door is a no deal decision.
@TallManMoto 5 күн бұрын
That's not a bad price for what you're getting...
@neizpiez 11 күн бұрын
Stolen design from the originator, kauritmoto.
@TallManMoto 10 күн бұрын
Ooohhhhh....... I never knew this. I mean there's lots of copy cat products, so I'm not surprised, but I thought this was their design. Off to research!
@robertopiras9746 15 күн бұрын
Hey man why rear axel nut is on the left side?
@TallManMoto 14 күн бұрын
I do not work for Honda. So... I do not know. 😆
@jamesdspaderf2883 26 күн бұрын
Just watched a dude use zip ties instead, made it look super easy.
@TallManMoto 26 күн бұрын
I need to give the zip tie method a go... It can't be that easy. 😆
@jamesdspaderf2883 26 күн бұрын
@@TallManMoto lol we'll see! My front needs changing, I'll write back.
@poseidon5003 29 күн бұрын
They're nice tires. I had them on a CRF-250L Be wary of the speed rating though.
@snoopy1fan Ай бұрын
Does my heart good to see you work so hard at something you love ❤
@TallManMoto Ай бұрын
Aw. Thanks, ma!
@touriston2wheels Ай бұрын
Luv'N it...🤣those moments of moto magic are 🤘
@TallManMoto Ай бұрын
Practice isn't always pretty.... But it's damn important!
@MyADV360 Ай бұрын
Good job!
@TallManMoto Ай бұрын
Medium job. This was pre-Tyee. I fly over this shit now..... If you speed the film up. 😂
@mkramsauer Ай бұрын
Outstanding video and great suggestions
@captionkirk Ай бұрын
Way to go buddy 😂😂😂
@daveslens Ай бұрын
Practice is never wasted, although you may practice wasted lol
@TallManMoto Ай бұрын
😆😆😆
@snoopy1fan Ай бұрын
Oh I’m judging 🤨🤣😂
@mkramsauer Ай бұрын
Well that was fun 😂
@Eds_PanAm Ай бұрын
dude, you crack me up talkiing to yourself like that LOL..its only funny because I do the same damn thing...I think I'm ordering one of these! lol. yeah, i have stuff like that for my knees also when working on the garage floor.
@TallManMoto Ай бұрын
Glad you enjoyed it! And I definitely recommend this tool. Super helpful for tire installs... Much less effort overall!
@wandersofp Ай бұрын
Take the riding gear off and bags off bag, flop bike on its side and drag it. It's a light bike but that capability opens doors and it's easy to go down the rabbit hole and get into some shit. Good video, struggles can be healthy, hopefully you learned a few things.
@TallManMoto Ай бұрын
The big issue was elevation here in that last section. There was drop off on either side in the blackberry bushes so it had to stay upright. Struggles are definitely a good thing! This was my first solo stuck experience... Rode away much more aware of how to deal with a situation like this in the future. And the value of those Ladlesportadv.com grab handles and recovery straps. Definitely a cheap and worthy buy!
@michaeltait3783 Ай бұрын
I must know more!
@TallManMoto Ай бұрын
It's a pretty handy tool!!
@dougmrak784 Ай бұрын
just dish soap lay it in the rim right and bam its in . i am over 70 now been doing bikes since 15
@TallManMoto Ай бұрын
Dish soap is a great option.... I normally use silicone spray in the garage, but the point was showing it's possible.... and pretty easy.... with no lube at all on a stiff sidewall. You don't always have that luxury when changing/patching tubes on a trail. But yeah, it's a lot easier with some kind of lube on the tire for sure. I used to carry Dawn until it leaked in my bags and I had to spend half an hour hosing a bottle of it out of my side bags.😂
@someguy5035 Ай бұрын
Sucks. Your choices are, it binds, or it is so loose it skips teeth when you start adding pressure. It also binds inside my wheel. Like, binds so much I had to use a mallet to get it out. Basically, it is worthless and I'd love my $150 back.
@TallManMoto Ай бұрын
Again, to reply to your multiple comments, you are using it wrong. It's not the tool, it's the user. If you got it in without a mallet, you shouldn't need a mallet to get it out. That makes zero sense.
@someguy5035 Ай бұрын
@@TallManMoto It is a janky tool that doesn't work well, if at all.
@joenuclear4445 Ай бұрын
All that grunting... I don't want to work that hard..
@TallManMoto Ай бұрын
I grunt getting up out of a chair. My noises aren't an accurate scale of effort. 😂
@ladlesportadv Ай бұрын
Dang that's a stuck for sure. Thanks for repping our stuff Matt. You are now officially Supported by LadlesportADV!
@TallManMoto Ай бұрын
You're supporting an idiot who will make bad choices with great examples of how useful your stuff really is! 😂
@RayPresseau Ай бұрын
I was told the yellow dot on the sidewall of the tire is to line up with the air valve .
@TallManMoto Ай бұрын
I have seen lots of different information about it, but typically I go by: if there's two dots the colors determine which goes where, if there's one it should go opposite the valve, if the moon is in Gatorade it should be three turns past a witches finger.... I learn from the internet so I'm not claiming I know; just to be clear. 😆
@BoogerMan21 Ай бұрын
Jarvis, watch this new Tall Man Moto video.
@TallManMoto Ай бұрын
I never said I was smart... 😆
@endurofurry Ай бұрын
I don't belive that bird was hurt by the way it was walking. It's a tactic used by some kinds of birds to get your attention and keep you away from the nest. In nature, if a predator gets too close she will flap around and act injured to get the predator away from the nest. This is most common with birds that make their nests on the ground.
@TallManMoto Ай бұрын
No kidding?! That's actually really neat.
@endurofurry Ай бұрын
@@TallManMoto I have a nest of them at the entrance to my enduro track. Every year she builds in the same spot. We put a traffic cone out there right next to it once we see eggs, so no one runs it over. But every time we ride in and out the mother bird acts like this. Here is a great example I found of one bird called the "killdeer" if you are interested kzbin.info/www/bejne/h2TLaqJseqiFjtk
@human1513 Ай бұрын
Love the reality video which includes things like, "I am an idiot." Who has never said that at least once changing a tire. 😏😏🙄🙄👋👋 I like that tool for reducing the possibilty of pinching the tube. I have never had one of these tools. Recently I saw someone use a few 1 inch thick (I think that was the size) of wood say 3 inches long each placed between the tire and the rim to help keep the bead under the rim lip once this area has been installed. They use 2 or 3 spaced peices around the rim. This is to hold the tire lip down in the rim's valley during installation. I would not use silicone lube as it will remain slippery and then later the tire can spin on the rim. Glass cleaner or real rim slip lube will dry later which is preferred. I also like to sprinkle baby powder inside the tire so the tube does not chafe when it flexes against the tire as you ride.
@TallManMoto Ай бұрын
I always just hit the tire with chain cleaner once I'm done to clear the silicone spray off, but it normally dries out if I forget. The Bead Buddies serve that same purpose to keep the bead from seating... I love them. Glad you enjoyed the content; I just stumble through things while the camera is running and people seem to enjoy it. 😆😆 LiKe AnD sUbScRiBe 😆😉
@JustLaineADV 2 ай бұрын
That looked fun! Great Video.
@TallManMoto 2 ай бұрын
It was a good time with great people!
@daveslens 2 ай бұрын
More fun to ride them than drag them lol
@TallManMoto 2 ай бұрын
Forced workout... 😂
@SydewayzStan 2 ай бұрын
I’m gonna have to explore that area
@TallManMoto 2 ай бұрын
Let's get it, bud!
@SydewayzStan 2 ай бұрын
@@TallManMoto hope we get another couple decent weekends of weather before it turns to shit!
@mkramsauer 2 ай бұрын
Yooo that was stuck stuck great video brother 👊 looks like allot of fun
@Crittermoto 2 ай бұрын
You still have the green ribbon from GLFY '24 on the bike 👍 UNGH! GRUNT! Cuss, cuss, cuss 🤣🤣 Nice job pushing bush!
@TallManMoto 2 ай бұрын
A reminder of great times, until the next set of memories!
@Crittermoto 2 ай бұрын
@ cheers!
@queenslander954 2 ай бұрын
Hmmmm .. I don’t know mate , you edited that last bit pretty quickly.. it was suddenly on. 🤣
@deerinmyyard8430 2 ай бұрын
8:14 How convenient to have people park right in the middle of the switch back and block everyone's path. It's stuff like that which makes me hate doing the routes that are part of the Touratech Rally.
@TallManMoto 2 ай бұрын
They were off the road, we were just further behind them also off the road. But yeah, Touratech do be busy.
@DualSportDoug 2 ай бұрын
I've been up to Tyee Lookout probably 6 - 8 times over the years. First time was in 1997. The last few miles are pretty rocky and challenging. Going uphill adds to the challenge. The gnarly section has gotten worse over the last few years. I am working on a video from my trip up there in 2020 and the road wasn't nearly as bad as your ride. I rode the pavement all the way to the end, because it's a blast. I see in your video, the Touratech route took you on some of the dirt side roads which I mention in my video.
@TallManMoto 2 ай бұрын
It was a good challenge.... I enjoyed it a lot, even when I didn't. 😂
@DualSportDoug 2 ай бұрын
Since you live in WA, you ought to consider coming to the Dirty Face Dual Sport event, which is a few weekends before the TT Rally. I've been doing it since 1997.
@TallManMoto 2 ай бұрын
That's been put on my radar this year... I need to look into it.
@DualSportDoug 2 ай бұрын
@@TallManMoto I will keep you updated on details about the event. I'm the guy that lays out the entire course. The 2025 route is done. I created it last year right before Touratech Rally.
@DualSportDoug 2 ай бұрын
9:53 That switchback is a huge PITA on a big bike.
@squid148 2 ай бұрын
I’m not a big fan of it because it’s only good for installing the tire and is 160.00.
@PA-Tammy 2 ай бұрын
50.00 stand is all you need and 3 good tire spoons.. Pinched tire happen in the woods not on the stand....
@TallManMoto 2 ай бұрын
It's a specialty tool and I think absolutely essential for trailside repairs, or event installs.
@someguy5035 Ай бұрын
Doesn't even work right. It binds or is too loose. It won't sit all the way down in my wheel despite being the exact right size.
@TallManMoto Ай бұрын
@@someguy5035 If it's binding or it is too loose, you have the spindle screwed in incorrectly. You have to adjust it by screwing it into the correct amount to get it to run smoothly. Not sure what you're referring to saying it not fitting in the wheel.... They come in multiple sizes.... and it's supposed to sit high, not flush, so it can sit above the wheel height. It works great, it sounds like you just aren't using it correctly.
@someguy5035 Ай бұрын
@@TallManMoto Yeah, tried that. Your choices are: binding or skipping teeth. The shaft is scraped up. It was manufactured poorly. My bearings aren't messed up. My hub isn't messed up. The tool sucks. It is designed like something you buy at autozone for $20, not something that is $150+
@Crittermoto 2 ай бұрын
That was fun!
@MyADV360 2 ай бұрын
Great video! So said I missed it 😢
@TallManMoto 2 ай бұрын
We missed you buddy!
@owenlushadv 2 ай бұрын
Have you got a link to that tarp?
@TallManMoto 2 ай бұрын
Link added in the description. I get nuffin from it. 😆
@owenlushadv 2 ай бұрын
@ lol 😂 thanks!
@SydewayzStan 2 ай бұрын
Nice! What a great time
@TallManMoto 2 ай бұрын
@@SydewayzStan what a great group of people. 😆
@SydewayzStan 2 ай бұрын
@@TallManMoto Next year is gonna be epic
@daveslens 2 ай бұрын
Always thankful that the hardest parts are just short part, luckily so many people to help!
@TallManMoto 2 ай бұрын
Some, but not all, of my favorite people camping and riding. It was a great weekend. Always pick the most tired guys bike up is my motto.
@daveslens 2 ай бұрын
@ doesn’t happen as much when you’re full of energy!
@captionkirk 2 ай бұрын
❤❤❤ what a blast.
@TallManMoto 2 ай бұрын
It was better because you were there. 😉
@captionkirk 2 ай бұрын
@ oh that's making all mushy inside❤️😂😂😂
@mkramsauer 2 ай бұрын
Tallman mafia for the win!!!! That was so much fun brother 👊 I can't wait to do it again
@zekeil 2 ай бұрын
The seat is all i needed to see. Thats a seat designed for motorcross where you hardly ever sit, it's not for long rides.
@TallManMoto 2 ай бұрын
That seat is a Seat Concepts Seat and I rode 560 miles on it with almost no issues. It's definitely not a motocross seat...
@paulscountry456 2 ай бұрын
West side of Cascades has all the trash,east side people are cleaner.I might get one of these...That's a real dirt bike with a plate...lol
@DorkintheRoad 2 ай бұрын
Well if anyone knows about being a tool...it's Matt
@TallManMoto 2 ай бұрын
MATkita?
@owenlushadv 2 ай бұрын
As you said it’s a process, but so is doing the job more then once cause you pinched a tube. May just order one of these, be handy to have!!! For riding with people with tubes lol
@TallManMoto 2 ай бұрын
Yeah I'd rather do it once maybe a few minutes longer than two or three times with stiff sidewalls and pinched tubes.
@daveslens 2 ай бұрын
Nice tool! I know what you are thinking..... don't go there....
@TallManMoto 2 ай бұрын
😆😆
@TheMotoShaman 2 ай бұрын
That would be awesome to put in a bag! I bought a rabaconda a couple years ago, and now I’m the default stop for all my buddies when they have tire issues. They pay in beer and laughs so it’s not a problem!
@TallManMoto 2 ай бұрын
It's always in my sidebags. #alwaysready