4 жыл бұрын
6 жыл бұрын
Пікірлер
@CassieFuller 15 сағат бұрын
Genius!!! I'm soooo excited! I just did this hack to mine, and now I can brew the new compostable pods!! Thank you!!!🙏
@Carsyn-xr8yu Күн бұрын
Do I have to use a wire nut after cutting the orange wire?
@kwok3d Күн бұрын
no, but you can tape it if you like
@askapk 2 күн бұрын
August 2024. This video is still helping people. Just fixed my 2.0 by cutting the ORANGE wire. Ty ty.
@Carsyn-xr8yu Күн бұрын
Do I have to use a wire nut after cutting?
@askapk Күн бұрын
@@Carsyn-xr8yu I didn't.
@Blu-Eyes-Wide-Open-2023 4 күн бұрын
Thank you so much for this video. I searched the internet for days till I found your video.. the oil filter auto zone gave me is what messed me up. I've never used one like that, so thank you! You saved me so much time with the video and the way u showed the tool sizes needed 🔧🔩 😉...Same vehicle, same oil filter, even the same oil!! Perfect video for what I needed🎉 Thanks again 😁
@kwok3d Күн бұрын
Welcome, I made the video so I can re-watch my own recalling these shortcuts lol
@namolokaman2393 14 күн бұрын
Marine heat-shrink tubing ( with glue on the inside ) might have worked better than the tape.
@HarshitModi-tj6sv 15 күн бұрын
So good! Thank you so much! ❤️ Saved so much of hassle and money!
@adriant240 17 күн бұрын
I cannot pry off that stupid blue cap. The front 2 latches undo easily, but I cannot undo the back latch. Any tips?
@thoob5thoob 21 күн бұрын
What were the symptoms that this particular part replacement fixed?
@simjoedappara1036 21 күн бұрын
Thank you!
@77panhead Ай бұрын
The plastic covet would not come off. Something holding it in the back.
@Up2winPartStore Ай бұрын
We have a bug zapper light bulb that may fit your machine. We're happy to offer you free product. Are you interested?
@locn1000 Ай бұрын
Thanks for the tip! the 2 turns work like a charm!
@captfcknut Ай бұрын
I have a red keurig 2.0. Definetly cut the ORANGE wire. Just did that and it works! Most of the wires in my harness were black, but there is one orange wire you cut.
@RandyL 2 ай бұрын
7 years later still helping out! This was the issue, thank you!
@augurseer 2 ай бұрын
you should post where you got the gasket
@blainf451 2 ай бұрын
$5.59 CDN fix but worth every penny - thanks very much for sharing!
@Pin8y6 2 ай бұрын
That was an orange wire not a green wire
@kwok3d 2 ай бұрын
pls read, both works
@Pin8y6 2 ай бұрын
@@kwok3d everything worked thanks 😊
@anneepasek 3 ай бұрын
Totally worked! The part price is $6 CAD now because of inflation, but still a hell of a deal. Many thanks.
@AnnSmall-gl7bp 3 ай бұрын
I cannot get the white thingamagig that holds the seal off. What do I need to do. Thank you.
@chileandpopcorn 3 ай бұрын
Worked great thanks!!
@Simplifizer 3 ай бұрын
That 2 turns worked on my Bidet! Yours is 9 months and mine is just 3 months! Thank you much!!
@gman3109 3 ай бұрын
I don't know if anybody else has mentioned it but you don't even have to unscrew the rod for the float. There's a slot on the side of the arm that you can pop it out from
@minnah22a 3 ай бұрын
Green ?
@kwok3d 3 ай бұрын
Either one works.
@azmaz73 3 ай бұрын
Thank you! Exactly what I needed to fix it!
@ramzialahmad9417 4 ай бұрын
Mine keeps spraying with pressing the trigger. Trigger doesn't feel loose at all.
@leelasharma_ 4 ай бұрын
Thank you so much! You helped me fix my flush in seconds! 😊
@Ezees23 4 ай бұрын
This video must be sponsored by Stanley, LOL. FFS, do these folks not know how to use power tools? Any time you release the downward pressure on the actuator as you pull the trigger - the fasteners won't seat well. This is true for the cheapest stapler as well as the most expensive, heavy-duty pneumatic nail gun. I have this exact DeWalt stapler and I have NO PROBLEM seating any fastener to the depth that I need it. You must keep downward pressure to seat the fasteners - always.....
@kwok3d 4 ай бұрын
I wish I get sponsored, not even paid by youtube coz i dont have enough views. I'm a lic contract from Arizona. I did apply downward pressure. This tool is junk. I use nailers from all gauges, jackhammer etc. I'm glad this stapler works for you. I make video for my own pleasure. Thx.
@chicagohavoc 4 ай бұрын
Where do you find the replacement washers?
@kamalnayan1115 5 ай бұрын
Thanks so much for sharing this great tip which perfectly worked for me, thanks again
@kamalnayan1115 5 ай бұрын
Thanks a lot for sharing this tip which perfectly worked for me. Thanks again.
@TheMikaCollins 5 ай бұрын
nice to know skills are a 'nice to have' rather than 'essential'! thanks!
@deksamtorrac6518 6 ай бұрын
I think all you had to do was pop off the lower seat only in a couple of seconds, to get to the fuel pump access panel. @1:10
@panpala 6 ай бұрын
It worked for me ! So many thanks from Canada.
@RicOlsen 6 ай бұрын
Perfect! thank you!
@Ulujmf 6 ай бұрын
Got the same setup but it will not refill
@kwok3d 5 ай бұрын
Did you get a syphon tank (with the dipstick).
@user-yl8fv4ih9l 6 ай бұрын
Fantastic video. This was VERY insightful. Thank you.
@BV____ 6 ай бұрын
Orange wire worked for me
@tannerschumacher67 6 ай бұрын
Works!
@digitalkamran1 7 ай бұрын
Would you recommend dremel for removing paint from a carbon bike frame?
@kwok3d 6 ай бұрын
Never! you would damage the epoxy allowing the carbon to exposes. Depends on types and amount of paint if it's just some splashes of latex paint, use hot water and wipe it. You can try Windex, rubbing alcohol or the worst case use WD40 with a dishwashing sponge. Stay away from Dremel for just paint drops removal.
@digitalkamran1 6 ай бұрын
I was thinking in line of repainting a carbon frame and maybe save some time, but will consider other options now😅
@dansurmitis3452 7 ай бұрын
Who chooses this insipid music? My ears still hurt from that noise!
@yelsisfunchannel8256 7 ай бұрын
Thanks! Cut the orange wire then viola! God bless you!
@hochimatos9717 8 ай бұрын
I had green and orange option, just like in the video. I cut the orange, and BINGO!
@lpsstacy 8 ай бұрын
If you open the next section where the display is connected you will see a wire harness that clips into sensor . I unclipped it not cutting any wires and it works perfectly! 😊💪
@jcf3996 8 ай бұрын
You're results don't match the results I've seen from that tool when I use it. Light pressure on the power adjustment knob makes a huge difference as another commentor stated
@jef0abraham 8 ай бұрын
This video helped me lot. Thank you very much! I picked the part up from HomeDepot and worked for HydroClean EZ.
@heliosrodriguezchavez1491 8 ай бұрын
Muchas gracias
@heliosrodriguezchavez1491 8 ай бұрын
Excelente idea!
@MBKill3rCat 8 ай бұрын
Was this one of the non-refillable cylinders?
@Michelle-js1le 8 ай бұрын
Genius! Orange wire worked like a charm!
@devine329 8 ай бұрын
Thank you so much!! This "Oops" error message just popped up out of nowhere yesterday. Thought I was going insane! BTW, I cut the *orange* wire 👍🏼☕
@joshcruz2448 7 ай бұрын
Did the oops message go away after you cut the orange wire ???
@devine329 7 ай бұрын
@@joshcruz2448 yes it did! Haven't had any issues since!