DEWALT 5-in-1 Multi-tacker & Brad Nailer POWER TEST vs Stanley Sharpshooter Staple Gun

[@stephenbustos]

Nice and to the point video! I actually bought the Dewalt in this test, and this is what I've found as well. Fortunately, the main reason I got it was the Brad nail application for small crafts, so I kept it. A little sanding gets rid of anything still sticking up. I have pneumatic guns for the serious work.

[@jujuria13]

Yo, try pushing the dwalt down with your other hand. I've found it sinks the staples better as there's some kick back.

[@BenGebert-o7b]

Fantastic video. This was VERY insightful. Thank you.

[@jcf3996]

You're results don't match the results I've seen from that tool when I use it. Light pressure on the power adjustment knob makes a huge difference as another commentor stated

[@sealand000]

You were steadying the Stanley with your other hand, but not so the Dewalt. Makes all the difference.

[@savedfaves]

Which brand tools do you own? 😆

[@KLartrandM]

Does the sharp shooter staple on the knots? Wondering why you didn't show that.

[@kwok3d]

laziness lol. I thought about ending the video before shooting any knots, wasn't part of the plan. But I should have done that with the Sharpshooter, sorry :(

[@KLartrandM]

Lol, thats ok i appreciate the content. I was just curious. That sharp shooter is no joke! Trying to find the right staple/ brad nailer. Any suggestions?

[@donovanniels1149]

I have the Dewalt and it has no problem sinking staples??

[@savedfaves]

Hmm

[@kr4ftw3rk45]

What are you stapling... jello?

[@donovanniels1149]

Lol, paper

[@carollytle6937]

My Dewalt electric works sometimes but then other times the staples buckle. Im stapling canvas onto wood. It is really messing up my artwork at times. I was wondering if it was the the denseness of the wood.?

[@kwok3d]

It's definitely not the hardness of the wood, canvas wood are mostly soft wood. It's how bad dewalt made this tool. I would suggest going back to manual ones.

[@timothygreene5088]

Thought the brads did fair. Did you ever try 1/2 in brads?

[@kwok3d]

Plan on trying that next. 1/2 is more suitable for most applications. I bought the longest and shorest to see how extreme it performs.

[@VicT992]

Nice test. Could you please tell me how many amps or watts this stapler is? I'm sure its 120Volts but I need to find out the watts or amps since I'm in Australia and have to buy it from the US.

[@kwok3d]

It says 6.4 amp (at 115v) but for that split of a sec when hammering the staple out for sure.

[@VicT992]

@@kwok3d thank you so much for that info

[@spicemasterii6775]

Great video. Dare I say....you nailed it!

[@jodiehamilton8518]

How do you load the staples into the multitacker? I put my staples in and they slide back and forth inside the stapler. Nothing inside to hold them in place and push them forward? I’m confused. 🥴

[@kwok3d]

Did u get the right size of the staples?

[@jodiehamilton8518]

K O Yes. I have 3/8 10mm. My 5 in 1 isn’t wired but that shouldn’t make any difference

[@kwok3d]

@@jodiehamilton8518 3/8" 10mm is the height of the staple... as well as 8mm 14mm 16mm etc. I say if you can shut the clip, you should be able to them out.

[@mrwilson12345]

great review. wished I would've watched it yesterday. just bought the dewalt and it's completely useless. my manual Arrow staple gun is much better. I'm a big Dewalt fan, but this is definitely going back. Looking for something better.

[@sharonsanderson4514]

Stanley works good I've got one but my hands won't do the work anymore in comparison I'd rather have the electric one or I would spend out the money for a air powered staple gun and cut out the middle man for sure

[@Theexecutive100]

How fast can it fire ?

[@kwok3d]

It does single shots, as fast as you trigger it.

[@oupekha]

Love these like of videos. Nice and to the point video

[@samanthalockridge7838]

Can you adjust the pressure on the stapler to sink them in further? Flush.

[@kwok3d]

That's what I did in the video. Please watch again. I had it tested at min and max power.

[@misteress8008]

Samantha, he shows the big round knob on the back that goes from min to max, turn it to max

[@marktaylor3630]

Ill take Stanley any day

[@sanjanabhute3288]

From were v can buy

[@vincentcaraballo6370]

Thank you VERY much

[@jodiehamilton8518]

Mine isn’t wired. Not that that should make any difference

[@LeslieArnelleTV]

great review . thank you :)

[@powerofdreamx]

Well done

[@hcazonis]

Very good tool.

[@movazi]

why would Dewlt make such a lousy stapler ?!

[@kwok3d]

I asked the same question. I was hoping that dewalt would save me tedious efforts and time but it's a total waste of money. This is hobby class, softwood, picture frames etc...

[@misteress8008]

Why did I just buy such a lousy staper ?!

[@Ezees23]

This video must be sponsored by Stanley, LOL. FFS, do these folks not know how to use power tools? Any time you release the downward pressure on the actuator as you pull the trigger - the fasteners won't seat well. This is true for the cheapest stapler as well as the most expensive, heavy-duty pneumatic nail gun. I have this exact DeWalt stapler and I have NO PROBLEM seating any fastener to the depth that I need it. You must keep downward pressure to seat the fasteners - always.....

[@kwok3d]

I wish I get sponsored, not even paid by youtube coz i dont have enough views. I'm a lic contract from Arizona. I did apply downward pressure. This tool is junk. I use nailers from all gauges, jackhammer etc. I'm glad this stapler works for you. I make video for my own pleasure. Thx.

[@maxirismailov6362]

Уважаиме где можна купит 20мм скоб забивател

[@MrMichaeldan1]

WOW !!

[@wtf8196]

Cool danke

[@jonathanthink5830]

does not look very good ....... that said the video speaks a thousand words ...... :-)

[@samanthalockridge7838]

👍

[@maxirismailov6362]

Уважаиме где можна купит 20мм скоб забивател