Thanks very much 🙏🏻 ..haven't tried it myself, but I've read about people using EMXP with SP12's.. so, I presume so! 👍🏼

@@tonelabqtcan you tell me what’s inside the rossum sp1200 sd card ? Is there « kits » ?

Yes. The default kits. Alternatively, you can also find some Kits of vintage Drum Machines from my collection here 🙏🏻 store.tonelab.au/en-aud/collections/sp1200

i already bought two of them, the 909 and her little sister the 707. Now i am waiting for the SP to be shipped. Rossum website indicate late december, then i have to pay for the international taxe… but in the end, and with your help, i’ll reach my most dreamed musical instrument.

@@jeanmicheljarret6097 Fantastic.. you'll have lots of good times with it. Be sure to post some of your beats in the SP1200 forums on facebook 🙏🏻

Sure.. but it's not all that accurate.

I can't remember if the DP88 has 2 independent ADAT inputs or whether they combined to cater towards/allow 96kHz. But, if you 'flash' the 'state' of the Saffire settings to act as a 'stand alone', then you could use that as an ADAT-adc to feed one of the DP88's ADAT inputs. Then, with the DP88 configured 'neatly', you might be able to capture 16 (2x ADAT streams) into the DP88 + it's own 8 as analogue for a grand total of 24. Then your computer could capture all 24 separate tracks rather than the summed 2-stereo S/PDIF 'out'. 👌🏼

I cover Directories in the intro tutorial. Try this it's queued up the chapter 🙏🏻 kzbin.info/www/bejne/noubh4ONhL5qqsU

Kinda yes.. but by default the 'Copy' feature will create a 'linked duplicate' to the original (of the copy). So this clip demonstrates how to get around that so you can 'edit' a copy 👍🏼

@@tonelabqt hi thanks. So you basically have two samples for the ram price of one that you can edit separately? Ie different decays and volumes and such?

ahh no.. you can have 2 for the price of 1.. but, if you wanna edit your '2nd', you have to run this trick 🙏🏻

@@tonelabqt Ah right. I thought that was too easy. Mind Im certain that an Akai I owned decades ago could copy to a unique self contained copy. Something like an S1000 perhaps. Was a superb feature. Unless I dreamed it all

Sure.. the majority of Samplers didn't have this 'caveat' and some, like the ASR-10, allow for 'both'.. as in create 'physical' copies.. or duplicate 'by reference' to an original Sample 👍🏼

🙏🏻

Thanks very much 🙏🏻 ..in answer to your question.. "It's exactly the same for the Rossum" 🫡

Yep, this is a great option for an ASR.. samplerzone.com/collections/zuluscsi/products/zuluscsi-v11

🙏🏻🙏🏻

Yep, I use it for the same reason 👌🏼

Nup 👍🏼

Correct. Although, a 'Template'.. while good in theory.. probably won't work too well for various changes in Sample levels... unless, that is, you use the same Samples each time 👍🏼

@@tonelabqt i would say sample chops in bank A those over the stereo out channel and bank B for drums and bass. I always place my kick, ghost kick, snare, hh, ect on the same pads so those would like be "locked in" on the same outs. I will try this out 🙂 But the stereo out "hack" you explained for extra 9 and 10 are a very nice and usefull!!

Unfortunately, no. 🙏🏻

"These" ?! 🤔 not sure what you mean. But, you can find sounds for the SP via the link below.. and put them on the SD card using any Mac / Windows computer. PS. They come with instructions too 🙏🏻 tonelab.merchi.co/products/?category_id=264

No. Check out the Disk section in the full tutorial for more about it 🙏🏻 kzbin.info/www/bejne/nHvPnYCfi9Z_abcsi=ycjjHK1gKkZ94Jsz

🙏🏻👌🏻

Depends which Outputs you're using.. Check your Stereo Mixer and the Individual Output Mixer 👍🏼

The Main Output has a different signal path to the 8 individual output board, and.. it also 'sums' 8 channels into a pair. So, effectively it's 'combining' 8 channels, which is likely reducing the dynamic range.. and that could be what you're hearing. But, check your XL Mixer's 'Set Up' page to see if adjusting the output level helps. If you're not sure how to do that check this tutorial for that 👍🏼 kzbin.info/www/bejne/kJWsY2qoi5WCgM0si=208V8rDOiDlKrJCG

@@tonelabqt Gratitude on your response. Thank you much! So the MPC in use is the 5000. The Mixer setup is slightly different than the 2KXL. There isn’t a separate tab for stereo and indiv. outs on the 5000. Everything is assigned via stereo “L/R” or 12, 34, 56, 78, or 1-8 mono on the same mixer screen labeled “Program Mix”. So it sounds like if I want to use “L/R” stereo outs as 9/10 it would have to be isolated but unfortunately everything assigned is in one screen so therefore it seems like my L/R stereo outs will still pick up the 1-8 assigned tracks which it did unfortunately. As far as the db output volume I will double check that in “Setup” and see if there is an option to boost the indiv. 8 outs volume. Thank you for that reminder as well! Also, if lets say Pad A01 is a stereo sample chop and I assign it to 1/2 output, does it automatically make output 1 and 2 left and right? Or do I have to assign that same sample on pad A01 to another pad, assign 1/2 again to that and pan A01 far right and the other copied sample to the other pad hard left? That is where I am getting so confused reading in these forums everywhere. Sorry if I sound like I’m asking too much lol. Hopefully I broke my questions down simply as possible. Thanks in advance again

IN the event you have a Stereo Sample, which you allocate to say, for example.. 1&2 (A stereo sample will only ever 'Pair' across 2 channels).. regardless of other samples, that may be 'Mono', also assigned to 1 or 2, or any other output for that matter.. you'll still be able to assign a Stereo Sample to any pair. The fact that a Stereo Sample accommodates an output-pair, does not mean a Mono Sample will 'not' be able to be applied to either Left or Right of that Pair. You just have to keep your Mono Samples 'out' of that pair.. otherwise those Mono Samples will appear either hard Left or hard Right.. depending on, whether or not, you have your Mixer 'Panning' those Stereo pairs hard left or right. 🙏🏻

@@tonelabqt Thank you for clearing this up! Appreciate you

@@tonelabqt My final question would be, how can I use the stereo outputs “L/R” as 9 & 10 without assigned outputs 1-8 bleeding into it? I know the 2000XL has a separate stereo tab in the “mixer” options. However, the MPC 5000 has all assignable outputs options all in one screen. So you select every channel as “L/R” or 12,34,56,78 or 1-8. I’m guessing there isn’t an option on the 5K to use stereo outs as 9 & 10 without other assigned 1-8 bleeding into the recording of “L/R”

You can copy sounds.. but you can't edit the copy as the copy refers to the original, however, in saying that.. if you delete the original.. the 'copy' then becomes 'editable' as it's no longer a 'copy' 👍🏼

​@@tonelabqt Thought so! yeah, when you load up your samples and want to make space, this is what i'd do. Tried it tonight and it worked.

Thanks very much 🙏🏻 ..if you have a computer, it is a lot easier to manage Files and Folders. As a rule, I always keep Files and Folder names 'short'.. and without using any 'spaces' or 'characters' that the SP may not be capable of displaying 👍🏼

@@tonelabqt Thank you so much! Ever changed file names on the computer? And then tried to load the renamed files? Scared to try. LOL.

@@asiwas Yep, I renamed all the Kits on my store, prior to listing them.. didn't have any issues 👍🏼

Q1. If you have 1 sound in the SP memory, you can save that on it's own. Q2. Use the Disk Module option #0 - watch this clip for more kzbin.info/www/bejne/nHvPnYCfi9Z_abcsi=Z23fcnHdolB4z7Av&t=1645 🙏🏻

I’ll try and remember to always hit 0 and create a folder/ file when I start each session.thanks

Nnnnnn.. well, technically.. with the right Windows OS, and some old software, you could 'rip' the samples from 'SP1200 disk images' as WAVs. Then, you could load those WAVs into an MPC. So, it is possible.. if you have the right stuff👍🏼

@@tonelabqt ok, thank you. So it’s not possible to insert the disk into the MPC x se directly, that would be a dream. Workflow is great on the MPC x se,

No, but.. I created an XPM (MPC Program) for the SP1200. Each MPC Bank & Pad number.. relates to the 'same' Bank & Pad number on the SP1200. MIDI cable 'Out' of the MPC.. into your SP1200. Select a MIDI Track, on your MPC.. assign MIDI Channel 1 and away you go! 👌🏼 Download it here FREE 🙏🏻 www.dropbox.com/scl/fi/2yox49of1hotm8bzydsz9/SP1200-TL-MIDI.xpm?rlkey=hzl7ulwpj1ac1xyre1c1ki3qa&st=xmir55mi&dl=0

The 'concept' will. But, I'm unsure of the EPS Classic's Sample Rate... so, what you can do is.. use the S900 / S950 calculator.. and manually key in your Sample Rate. Here's the link to it here 👍🏼 tonelab.tv/bpm2vrsc.html

The Rossum can load HFE's 🙏🏻

Yes I’ve read that it can. But when I put my sd card inside it from my og it says no card inserted?

Then it's possible your SD card is an unreadible 'format'. Transfer your HFE files to another SD card, formatted as FAT32 🙏🏻

No, but I do remember that bug with 1 specific OS.. unfortunately I can't remember what it was... if I had to guess 2.14 perhaps?! ..so, either downgrade to the previous version, or go up.. that is.. if your Computer OS is compatible with it. Check out this page to check out whether or not your OS supports those versions 🙏🏻 support.akaipro.com/en/support/solutions/69000431967

@@tonelabqt 2.14 is the current mpc firmware, I should downgrade then? I'm also on windows 11 if that matters thanks!

Yeah, I can't remember.. maybe 2.10.4.. I ended up downgrading. So, if you can't go forward go back a version 👍🏼

Yeah, if you have the 3.5" Disks.. you could source a Windows PC, with 3.5" Disk Drive.. and use OmniFlop to convert your SP Disks to Image Files. The Rossum can load image files of that nature 🙏🏻

@@tonelabqt Thanks so much for taking the time, I really appreciate it. Would LOVE to see you do a tutorial on it. I can't be the only one in the same sort of quandary. Also, just to confirm, this operation can't be done on a Mac? Thanks again for your help!!!

If you can find OmniFlop for Mac, then I'm sure it could.. but, from what I understand.. OmniFlop is a Windows based app 🙏🏻

"the safari test kit files does nothing" ?! ...in what sense?! ..did you select it via Programs?! ...it's worked for many others, so I'm unsure what 'does nothing' means. Can you see the Waveforms if you try to edit the Program.. via Prog Edit?! The calculator has worked for many, so I expect you should have no problem there 🙏🏻

@@tonelabqt no wav it was totally blank sir very strange

What MPC One O.S. version are you using?!

@@tonelabqt the newest one just updated a few days ago maybe i'm doing something wrong?

Hard to see from where I'm sitting.. but, like I was saying, if you can't access the Samples via the Edit Prog-page... then, the Program (and it's Samples) have not been loaded into your MPC. So, troubleshoot the 'LOAD' step, first. 👍🏼

Did it throw an error?!

Awesome, glad it helped 🙏🏻

The Digital 'out' is a stream of the Main Output. There's nothing in the O.S. that allows you to route any other channel to your Digital Output 🙏🏻

@@tonelabqt can you send the digital out to a external mixer channel? I have the main out on 1 and 2 and I have thedigital out on 3 and 4 The mpc is spitting out both signals at the same time. TRy it

Yes, but.. why would you want the same Output from the Analog Output as the Digital?!

lol! no your right i fucked up! too much weed! honestly i was thinking about it .I just didn't think it out long enough.. :)@@tonelabqt

There's a section in the 'introduction' video where I discuss Presets.. try this 🙏🏻 kzbin.info/www/bejne/noubh4ONhL5qqsU

@@tonelabqt Thank you for your answer, i'll have to study why my Presets are cleared.