Eric Orr

Пікірлер

@mikeanthony8934 Күн бұрын

Not saying anything about what size fitting to screw into the head. Whether it should ve sane kength as the spark plug

@AR-798 2 күн бұрын

Nice.

@masonite1973 6 күн бұрын

Apparently that is an Oldsmobile 260 ci V8 engine. According to Google you could get this car with your choice of Buick, Pontiac, Oldsmobile OR Chevrolet engines. Lol that is wild

@sean.g4516 21 күн бұрын

Will that style rear master cylinder mount on a 01 yz250?

@JOKERBABYG 2 ай бұрын

That's a nice Skylark👍 they make very good cars, and they're built to last. mine's a 1977 Buick Skylark. I had two, but sadly, I ended up wrecking one of them :-(

@reagun22 3 ай бұрын

What exhaust are you running … exhaust systems are a nightmare to source for a 06-09 crf250r without paying an arm and a leg for it

@jessieellison2511 3 ай бұрын

Cv Alex size is 30 mm 12 point star not a 32

@kavinroberts422 4 ай бұрын

Would this process be the same on my 2008 es350?

@patrickkirby5003 9 ай бұрын

Just got a 76, where in the world did you find the tail lights? Gotta find a drivers side one

@serious22785 10 ай бұрын

Ya know

@20126193 Жыл бұрын

What size are rims an tires?

@noodleloves Жыл бұрын

I love it. Good job saving it. Keep it going!

@babatoraa9777 Жыл бұрын

I HAVE SEEN IN USA ALMOST MAX PEOPLES DOING REPAIR VEHICLE HIMSELF! WHY WORKSHOP EXPENSIVE OR WHAT?

@BWADaniel Жыл бұрын

My Valve seals will NOT go on. I bought Fel Pro & DNJ rock ones which look just like the ones I have. I tried a socket with a hammer & they will not seat fully. No matter how hard i hit it, there’s still wiggle room.

@modeljetjuggernaut4864 Жыл бұрын

For the dawn of the malaise era, (post 74) youre right, its not bad looking at all. 🤘🤘

@Halfpsychopath Жыл бұрын

Did any transmission fluid come out when you pulled your cv axle out? I had about a quart and half come out. I'm kinda scared to drive it now

@user-id1pl5vg2e Жыл бұрын

Fine video, gave me great ideas. What worked best for me was to remove the front wheel bearing hub, then upper ball joint. Super easy to get at CV axle, just a bit challenging to remove. Don't compromise on safety.

@jhnfrrguto Жыл бұрын

Cool car. I've got a 1977 Skylark it's red with some rust coloration. I just fixed the radio and posted the event on you tube. Check it out. 😎

@marklance033 Жыл бұрын

Do you have any more videos on this car?

@jamessouthworth1699 Жыл бұрын

I had a 76 Skylark S/R (Sport Rally)

@bdog4u2 Жыл бұрын

There is no rubber tip on yz80 needle. Check your choke plunger as it can flood engine. Replace float,needle,and needle valve. Set float height and enjoy. Some carb issues can drive you nuts 🤪

@Levi-zz6bk Жыл бұрын

Can it prevent the bike from running

@trevorj203 Жыл бұрын

You do not need to remove the tie rod

@geraldbalkissoon372 Жыл бұрын

My dad had one 1977 Buick skylark orange

@jporch788 Жыл бұрын

where do you order your parts from??

@geraldbalkissoon372 Жыл бұрын

My dad had one 1977 Buick skylark orange

@markdowns1 Жыл бұрын

First car in 1992 was 78 2 door pontiac lemans grand sport metallic sea green. Paid 700 bucks for it. Had 79k. Same Light green sage. Buckets all power everything . Had a 305 4 barrel aluminum factory intake and 350 th transmission

@markdowns1 Жыл бұрын

Really nice car!

@norakat Жыл бұрын

Maybe you should put a little dent into the axle nut w a blunt chisel.

@erickonassis6310 Жыл бұрын

How did you know it was bad

@buckster2575 Жыл бұрын

I believe I've two or three in my lifetime.

@CyrusFisher619 Жыл бұрын

That bike costs $2K in WI

@chronjuanjm Жыл бұрын

🤔

@darrininverarity4297 Жыл бұрын

Thanks for the information about that valve spring tool.

@JuanGarcia-oz6sg Жыл бұрын

How much gears do the 03 yz450s have ? Somebody let me know plz

@yamaha230xxx Жыл бұрын

mine has 4, it a short track racing bike very short gears

@angelteamnolimit624 Жыл бұрын

5 dude

@angelteamnolimit624 Жыл бұрын

@@yamaha230xxx 5 not 4 lol

@SASQUATCH205 Жыл бұрын

@@angelteamnolimit624 The 2003 is a 4 speed, I think the 2004 is a 4 speed also.

@serious22785 10 ай бұрын

It's a 4 speed,.don't listen to these retards. You can Google it, or own one. I have 3

@danielbennion80 Жыл бұрын

That 260 is an Oldsmobile engine. Treated right, it'll run forever, although it's not terribly powerful. Parts will be hard to find, since the car is as old as it is. You can interchange many parts from Novas, Pontiac Phoenixes and Olds Omegas; also Cutlasses, Monte Carlos and Regals. I restored a '77 Skylark years ago with parts from several cars. All I can say is 'Knock Yourself Out!'

@rickdamico7048 2 жыл бұрын

I've got a 1975 Buick Skylark red 52,000 sitting in my drive my driveway with a car cover on it I got a 231 V6

@marioguzman9290 2 жыл бұрын

Hey bro! Working on my 01YZ250 on my reeds cause the bike was really hard to kick start, was having to bump started and all that. Anyway question is: is it necessary to run two gaskets or only one? One between the cylinder head and the Reed cage and one between the rubber boot and the Reed cage, essentially sandwiching the Reed cage with gaskets. My bike didn't have any gaskets at all and there was gaps on the reeds and also a chip in one.

@benrodeheaver701 2 жыл бұрын

Hey ! Can you find me a repairable motor ? Any make, just air cooled. What state are you in ?

@jeffpitzer8521 2 жыл бұрын

as a 40yr veteran of the auto body industry...I would recommend that you repair that dent on the right bedside instead of cutting it out and welding in a patch panel. even if you're not an expert I think you would better result...maybe you have a professional rough it out for you if you don't feel qualified.. you can probably get access for some pry tools though the tail light hole.. hope that helps..cool truck..I love the 67-72 C10's...have had several over the years..

@jimbutler9076 2 жыл бұрын

That is normal for gas guage

@jimbutler9076 2 жыл бұрын

I have 1975 Buick century custom bought new 135 thousand miles have 8 cars best car ever

@TheREALOC1972 Жыл бұрын

A 75 Buick Century is my step-dads dream car. He had one that was Gold with T-tops and black vinyl landau top he bought brand new and his first wife wrecked, now that he's retired he's looking for one, never really knew how rare the t-tops were until we started looking.

@jimbutler9076 2 жыл бұрын

Yes

@brownfieldjimmy1693 2 жыл бұрын

You should Rhino line the underside of the cab and the bed

@matthewwatkins1156 2 жыл бұрын

I just brought a 79 Buick skylark,, need a lil TLC and I’m going give it to her

@TheREALOC1972 Жыл бұрын

I just bought one myself, Original white with light blue interior, the paint needs to be redone and the front seat and dash pad needs redone but it's an original Arizona car so there's not an ouce of rust on it.

@keithtett 2 жыл бұрын

What did you find to fix this issue? Also what jetting are you running? I'm struggling to get my son's bike running and it seems to be a similar issue

@remady5827 2 жыл бұрын

I currently have a yz80 that was converted to an 85 and before my top end went out I was using stock jetting for low elevation.

@zaywixks7057 2 жыл бұрын

A bike like that would cost 1200$ in Nc 🤦🏾‍♂️

@onkeldunkel3079 Жыл бұрын

In Germany you would pay 1500euro...its 1500Dollars

@Imnotyourdoormat 2 жыл бұрын

A Chevrolet Nova, built by Buick, with an Oldsmobile V8 in it...

@TheREALOC1972 Жыл бұрын

Yep but then again the Base Novas, Omegas, Ventura's had the Buick 3.8 V6 (231 CID) in it.... that's what was great about these cars, GM saved alot of money that way by using the best of any of the brands they had, My best Friend in High School had a 78 Nova that had the 3.8 V6 in it that I have in the 79 Buick Skylark that I just bought, the ONLY difference is that his Nova was a Burnt Orange Hatchback and my Skylark is a White but in primer now Coupe. When I first got it I called him up and after we cleaned it up we went for a ride like old times.

@jeffnpatricia 2 жыл бұрын

Why did you take all that off ?

@kartguy 2 жыл бұрын

Yeah your spring should not be that soft on the driven I would call who ever you got that from.

Ең жақсы KZbin

Пікірлер