Probly Not The Best Garage

Пікірлер

@westcoaster3763 4 сағат бұрын

I laughed plenty😂

@bobbarnhill8557 9 күн бұрын

The issue with this twist lock style is the angle of the ladder is bad. If you put your foot on the bottom rung your shin contacts the next step preventing you from pushing yourself into the boat. This step will work but is far from ideal. Also the plate will catch water either getting in plane or coming off plane. This will throw water on the rear deck. Several boats do not have grab handles to pull yourself into the boat. These would also need to be added.

@problynotthebestgarage 8 күн бұрын

Hey so while that is very true, to be clear here, this ladder is sold as an emergency ladder. If you are looking for something to use on a regular basis, then absolutely I’m sure there are much better options (all for a cost). This one from my experience though is very simple to use and myself all the way to my youngest child don’t have any issues getting in the boat with it. As for the water on the deck, this has never been an issue with this particular model on my specific boat. The way it is mounted is so tight to the jack plate, there isn’t any real issues with this. Hope that helped anyone else reading this as well. Stay safe on the water, that’s the main thing. Better options may be out there but I will say this ladder is far better than no ladder at all…which is how I bought the boat. Thanks for watching and the comment as well. Stay safe out there

@bradsmith1046 16 күн бұрын

Well done, thanks for sharing your technique and all the best

@nate4036 Ай бұрын

A buddy of mine took a coupling nut, a short piece of all thread, and thread locker to make his TH marine nut work. He thread locked the all thread to the billet nut and coupling nut. By doing that he can still remove the prop by unthreading the billet nut with its custom extension

@problynotthebestgarage Ай бұрын

Man that is slick right there. I’m going to have to give that a shot. That’s my only “complaint” about that prop though it’s not really enough for me to complain about at that. I like that idea though! Thanks for the comment. Very much appreciated

@nate4036 Ай бұрын

@@problynotthebestgarage hey appearance is half the battle🤷🏻‍♂️😂

@neillillo4748 Ай бұрын

Why does everyone jump down this guys throat re: the grease it’s just a video get over yourself!!!

@problynotthebestgarage Ай бұрын

Hey it’s all good! No worries at all. Lots of cool opinions out there. Heck I’m learning from comments as well that’s what makes it pretty awesome. Thanks for watching!

@joef2504 Ай бұрын

been running Kipawa prop for years, it's totally worth replacing the stock prop out

@problynotthebestgarage Ай бұрын

Completely agree! Like I said in the video it’s nice to have that original as a spare but as far as I’m concerned, that’s all it will ever be…a spare. Thanks for watching

@shadyfieldhomestead1974 Ай бұрын

I don't know if you said it or not, but after cleaning it with the toilet bowl cleaner, would I need to then wax it? In other words, does the toilet bowl cleaner strip the wax off? Okay, never mind at the very end you said it, it does need to be waxed lol

@problynotthebestgarage Ай бұрын

That’s correct! 110% make sure you wax it. I’ll be editing and posting an “over a year” review of the boat soon as well so watch for that. **I’ll give you a hint though, I wouldn’t hesitate doing it again**. Thanks for watching and stay safe out there

@victoreugenio472 Ай бұрын

i found the video i want to see coz i hv similar leak issue with my 265X65r17 tire on alloy magwheel, great !! but i will try first soapy water for cleaning and lubricant, thanks !!

@problynotthebestgarage Ай бұрын

Glad it helped. Thanks for checkin out the video

@scottd8555 2 ай бұрын

Does anyone have a discount code for kipawa?

@problynotthebestgarage 2 ай бұрын

@scottd8555 hey so when I made the video here I contacted Kipewa directly about that. Granted that has been about a year ago now but their response was that they offered no discount codes of any kind. Again that’s been around a year now but hopefully that helps. Still worth the money to me. That’s the only prop I run anymore. Since the video, it’s never come off. Thanks for watching and stay safe out there

@henryj.8528 2 ай бұрын

KY Jelly also works.

@problynotthebestgarage 2 ай бұрын

I can see that working. Only concern would be water on that but hey if it works it works! Thanks for watching

@henryj.8528 2 ай бұрын

@@problynotthebestgarage Allows it to seat, doesn't damage rubber. Company I worked for used it in manufacturing when attaching large bolts to a rubber gasket to keep the gasket from bunching. Once seated, didn't matter what happened as long as it didn't damage the rubber. Lots of jokes about it however....

@DanaMaxim-fr6ym 3 ай бұрын

I have them both I like the kippewa

@problynotthebestgarage 3 ай бұрын

I agree completely. Got the original in the boat for a spare but I have no intention to go back to it any time soon. Thanks for watching and stay safe out there

@COFFEE-e3p 3 ай бұрын

THANKS FOR THE TIP, A BIT CONCERNED DOING THIS ON A CAR TIRE, WITH THE TIRE COMING /slipping -OFF ON THE HIGHWAY ?? take good care all !!

@problynotthebestgarage 3 ай бұрын

100%. I would never use this for ON ROAD use. Definitely an off road use only. Thanks for the comment and thanks for watchin!

@beecee1235 3 ай бұрын

I always get a great "kick" out of restoration. I don't know why. More value for money, maybe. Looks good in the end. How long did it take?

@problynotthebestgarage 3 ай бұрын

These both took about an hour or so to do. Of course that’s including filming and what not but nothing too crazy there. Thanks for watching 👍🏻

@beecee1235 3 ай бұрын

"do something dumb like this every now and then" you say..... I do dumb stuff every now and then without even trying. :) More videos please.

@problynotthebestgarage 3 ай бұрын

Same! I just manage to get some things on camera haha

@beecee1235 3 ай бұрын

:) :) :) Brilliant. Great Video. Even better acting. Thanks. :) :) :) Made my day.

@problynotthebestgarage 3 ай бұрын

Hopefully nominated for an Oscar soon no doubt 👍🏻👍🏻

@cb4ishoot 3 ай бұрын

Great video... thanks!👍

@problynotthebestgarage 3 ай бұрын

Much appreciated. Thanks for watching!

@MosesMcCart 4 ай бұрын

Just bought a Kipawa for my Terrova. I know exactly what you mean by the motor feeling loosey goosey. Thanks for the video!

@problynotthebestgarage 4 ай бұрын

I feel sure you’re going to like it. It would be really hard for me to go back to that original prop now. So far so good on mine still. Thanks for watching and stay safe out there!

@v65wings45 5 ай бұрын

Water and soap will detect leaks on the tread. It will produce air bubbles anywhere there is a leak! I have found and plugged many leaks that way. You should never put petroleum products on rubber.

@problynotthebestgarage 5 ай бұрын

Yep. Soap and water bubbles just like I show here in this video…. Petroleum products used at your discretion as well. Also why I put a warning at the beginning. Never had a problem myself but use at your own risk.. Thanks for watching.

@davidrogers5180 5 ай бұрын

Ive used grease before never had a problem so i dont see the big deal with "rotting". What i found so nobody bitches is to get a can of cheap enamel paint or even primer and spray the rim heavy and let it dry. But u can do whatever but the grease is definatly more perminant!

@problynotthebestgarage 5 ай бұрын

Someone a while back mentioned the paint thing as well. That’s a solid idea. I’ll have to try that one day. Thanks for checking out the video

@davidrogers5180 5 ай бұрын

@@problynotthebestgarage yea cool! Very easy especially with pits and such fills in the void and the thing is it drys and can't hurt chit! I've noticed this especially up north here with aluminium rims and putting from calcium chloride and salt...

@paullee7467 5 ай бұрын

@@davidrogers5180 great idea!

@davidrogers5180 5 ай бұрын

@@paullee7467 my buddy has a car repair garage was just up there needed the bead fixed on a leaking tire he broke it down sanded the wheel and he put grease on the tire and rim said hees been doing it for 25 years and has never had a problem... I mite try peanut butter sometime just to see if it works and for chits and giggles

@davidrogers5180 5 ай бұрын

@@paullee7467 but the cheap enamel pain works great! Especially on pitted aluminium rims... Fill them pinholes in nice...

@davidmoody8603 5 ай бұрын

Your sites name gave me a good laugh,thank you sir.😂

@problynotthebestgarage 5 ай бұрын

Hey everyone needs a good laugh haha. Thanks for checkin out the channel

@MrBdogg317 6 ай бұрын

Looks great. Hope mine turns out that good. Once I get the boat

@MrBdogg317 6 ай бұрын

Is that the original switch panel just cut out for the new switches?

@problynotthebestgarage 6 ай бұрын

No, It is not the original. I took the original switch panel and traced it on a blank piece of wood so I could shape it. Then it got coated with 3-4 layers of paint just for sealant from water then of course the epoxy and carbon fiber over it. So far I have had no issues whatsoever through all kinds of weather. Just takes a little time to shape that piece as the old one is slightly curved to match the dash.

@MrBdogg317 6 ай бұрын

Thank you for this video. Hopefully I’m about to buy the exact same boat but a 97’ and I want to upgrade the switch panel. I just subscribed

@problynotthebestgarage 6 ай бұрын

Thank you for that. And I tell you, if I could go back and buy another boat…it would still be this one. I’ve fished on a bunch of them over the years and this thing rides great and is just so stable to fish on. You’ll love it! Thanks again for watching. Stay safe out there.

@MrBdogg317 6 ай бұрын

@@problynotthebestgarage thanks will do. Hopefully I’ll have it in a couple of weeks. Cold here in Indy but I can’t wait.

@Indeewoods 7 ай бұрын

Great video. I was wanting to hear from somebody that actually tried grease. That’s what I was going to do. I also heard about somebody using anti-seize compound and I thought of that as well but I think I’ll just try the grease since you say it works hopefully it’ll seal my bead up.Thanks!

@rdonner28 7 ай бұрын

Thanks for sharing! Good video

@patrickrutherford6882 7 ай бұрын

Great idea

@problynotthebestgarage 7 ай бұрын

Thank you. It definitely works well!

@andywillsie7253 8 ай бұрын

A quick question, because I think I might be missing something. Why do you have to remove the valve stem? Is it not enough to deflate the tire enough that you can easily and safely break the bead?

@problynotthebestgarage 8 ай бұрын

Hey thanks for the question there. So the valve core removal it just eliminates having to sit and hold it. It is by no means necessary at all. The removal of the core also allows for air to escape while putting pressure on the sidewall while you break the bead. Hope that makes sense and hopefully helps out. Thanks again for the question

@philsorrentino1707 9 ай бұрын

Does not work.

@problynotthebestgarage 9 ай бұрын

@philsorrentino1707 Sorry to hear that. Just to make sure though in case this differed. I did try a different type of cleaner that was just at our house already and had absolutely no luck at all. If that’s the case for you as well, make sure you try the exact brand listed in this video. Best of luck there if you decide to give it another whirl. Thanks for the comment

@joshbrookes6439 7 ай бұрын

Pull your head in buddy It's NOT the OPs fault that you bought a completely different branded product! There are only 3 scenarios in which you could make a statement like that in good faith 1. You are making assertions that the OP is a Liar and deliberately misleading his audience, but why would he do that? 2. You are making accusations that the OP used special effects and Photoshop to deceive his audience into believing that LYSOL would work to remove Hull waterline scum lines and discolouration. Or the most likely scenario is 3. Your incompetence has led you to purchase the incorrect product and when it didn't work you immediately make accusations that OPs method "DOESN'T WORK" which I can personally attest to that it most certainly DOES WORK if you buy the actual product OP demonstrates in this video. Derrrrh 🙄

@donmaurice1259 9 ай бұрын

I suggest diluting with water

@callsignsleepy 10 ай бұрын

great review man...i've been wanting to try one of these props out, but i've seen mixed reviews. I think i'll have to take the chance now!