Great instructional video. Thank you!

U don't have to remove the bolts to remove the starter its a little tricky but you can take your finger and feel where the bolt is at long extension and then it will come out good video though looks very cold u r a man doing this in the snow been there before myself lol Thanks for your info

Awesome 🤩 thank you

❤

Lilac is not food safe. As far as I'm aware

I am going to,try it.

awesome thank you for this video I,m just starting to consider a cnc machine that is capable of what you have done looking for more information

Love the crib board. I especially liked seeing your breath as you worked. Reminded me of growing up in Manitoba. You’re a tough guy to be sanding out in the snow. FYI: McGinn’s Workshop is right if you’re the only McGinn in it. (Singular possessive.). If you want to reflect your family, it would be “The McGinns.” Plural, not possessive. “Paytons,” etc. I see this with the misplaced possessive apostrophe ALL THE TIME on craft sites and T-shirt company sites. You’re definitely not the only one with the apostrophe added when it shouldn’t be, but if you’re going to personalize somebody’s board, you should probably not misspell it. GREAT project! New subscriber.

I've done it much better than you, and it works well I wish I had taken a video to share it.

Coconut oil in my experience isn't that good. I think it needs minerals.

is your design available in download? I have been making cribbage boards out of live edge Mesquite. I have a few designs with my VCarve program.

That they are very elegant! My favorite bird 😍 :) Well then and the Steller’s Jays in Colorado 😍 they’re so beautiful as well :) I’m assuming you are way up north Quebec or Nova haha since you say Atlantic Canada. Awesome to see them range that far north! 👀 😃

I would advise using the special heatproof tape at the ends of the rope which can give you a near perfect fray-free join.

What finish did you use on this?

Nice…

Thank you very much

Forgot to add, that stare drive or what ever its called is pretty hopeless since they went to plastic. We need that to be made of sturdier stuff as the teeth will break off after a years work or less. So when you pull to start you get the impression that the bits on the inside has broken of but in fact its the teeth on that sprocket your playing with has broken off.

Thanks mate. No need to drown your voice with that crazy tune. Been fixing these for years except these newer saws have newer ways that my eyes just don't seem to see very well now.

Thanks

Rename the video....How NOT to replace a gasket! Yikes

Mc Ginn’s do you still make pipes from a lathe?

String (no pun intended) of bad luck. Took the Husqvarna 55 Rancher to the mechanic and he charged $15 for a quick adjustment. Went to a neighbor to cut down a tree and I tightened the chain a touch, and forgot to tighten the two nuts back so after a single cut I saw the mistake and I'd lost one of the nuts. It was magnetic, but a hand search and magnetic broom type tool could not find the missing nut, so I went to a big box store and bought two replacement nuts. Came back, replaced the nuts and made sure all my adjustments were where I wanted, and I was off! 3 pulls later the pull string breaks. Today I went and bought a replacement string and had it all in place and ready, and made two test pulls to make sure everything had proper tension, then the recoil spring pops off. I tried most of what this guy did short of the nail with no luck, so I finally found this video and I'll try again. I'm not complaining. My Husqvarna chainsaw is awesome and my dad and I have cut down and cut up hundreds of trees with this saw, but no amount of quality can overcome a string of bad luck. Luckily for me I had just purchased a SunJoe electric extension pole saw to cut limbs over my head. This saw can disconnect from the pole and reconnect into a small, electric, but normal looking chainsaw which was good. That thing was worth it's weight in gold, and I was even able to cut through the base of a smaller tree that was about 12x20 inches using this with an 8 inch bar. Glad I found this though. That SunJoe is good, but not made for the work I have planned. Thanks for the good info McGinn's Woodshop!

Just watched this video...love the design. Do you have a pdf of the design??

How do I take the clips off

Thank you sir.

Just cause that's not the way you would have done it dosnt mean you have to belittle the man he did it the way it worked for him I'm doing a starter on one now and it's a pain in the ass to get to the top bolt he did a good video and if anyone dosnt like it then go about your day instead of being negative how bout show some positivity to your fellow man

Muy bien. Eso es digno de imitarse. ¿Qué tipo de disco utiliza en la sierra de mesa? Very well. That is worthy of imitation. What type of disc do you use in the table saw?

Beautiful. I just cut down a pretty thick lilac and thought, “what can I do with this when it’s dry?” Question and answer.

I have 2011 and this video applies to that car as well.

I like your dust collection system

This video saved me at least $100 in dealer auto service .?Thanks

Great video! Another thing to try is to loosen the allen bolt just a little and see if that frees up the starter pulley. Mine was a little to tight and didn't allow my pulley to retract all the way.

Thank you for this video, I was able to do this with my 2014 Equinox and save me from what the dealer possibly would have charged me Thank you again

Thank You it worked on my 2010

How did you get the black and color into the Elliotts board?

Jason what size drill bit did you use for your holes? Great looking board 👍🏻

Thanks brah.

Some people just love to talk. Reminds me of all the old women growing up, gossiping. If you can't get started in 15 seconds, it's not worth watching.

The LED bulbs I purchased to do this say ‘some vehicles may require a load equalizer’ . Is this necessary for the Equinox?

Thanks for sharing this helps to save some money .

Thank you and Lennie for this. It was a lifesaver, and now I know how to do it for future jobs.

coconut works well i have used it on boards i have made

Do you sell them

Woodglut has a lot of plans to choose from.

smart use both at the same time. 2 to a pack, the other side may die shortly, so do it.

Thanks for this video. It is very helpful. Changing my turn light was so so easy!

Thanks! Do you know where online I can re-order the right door clips?

I did it myself thanks to Woodglut.

You’re my new bf! I’m single now and my dad is not able to help me so much so this really help and it was so easy!! Thank you!!!