There is an Easier way to do this if you are Lazy like me. My Battery Lasted 30 Years and died today. I just lifted the Lid, Cut the 2 Positive Pins and the One Negative under the battery and soldered a PC CR2302 which has a positive and Negative leads and it came with double sided tape tab to stick it to the Main Board. Good for at least 10+ years. I have stock lying around of these archive.communica.co.za/Content/Catalog/Images/I0875319433.jpg Good Video, and I am sure a CR2450 would last another 30 years.

Thanks for this - I am undoing my VGP S-Video Bypass/RF Replacement. I don't think this worked / helped my C64

The seller sent me a software that works - the ones from pcsensor didn't work for me. if someone needs let me know

Hello! I want to ask you something. I know that the weight of solo knit band is only 50g. And now I use Elite strap with no battery and this is light at the back so the quest 3 goes down and touches the nose. Is it okay to use pro interface with solo knit band?

Nice to see you back on the 'Tubes! Cool tear-down and modding but I couldn't quite make out what was better about the replacement thumbsticks.

Intriguing video, Thank you! But could you please provide the links to the STL for the buttons and to the Hall effect sticks? Thanks in advance!

is the button easy to press? with just a little power? gently? will the legs get tired if they press continuously for hours? you know, like the Middle mouse button, there are buttons that are hard to press, it makes you tired if pressed continuously, unlike the left mouse click which is mostly soft and easy to press. what if I have 2 pieces, can they be set for different keyboard shortcut keys? are memory macros stored on the device? can it be used for Canvas panning in photoshop? it works by pressing and holding the keyboard space bar, however it does not work if pressing and holding using the mouse, will result in repeated spaces. somehow, the canvas panning function using the middle mouse in affinity could work like a keyboard spacebar being held down. it needs to be specially programmed if you want to use it in photoshop.

Absolute overkill for such a relatively slow system (2-3MB/sec), but it's easy to do :)

Так хрупнуло що мене здається що йому торба;)

So i will have to put out my graphics card to change the cmos battery, this is a very bad layout. I was looking for my battery on my x299 gaming pro carbon in the case but i could not find it yet. Glad there is a video here.

Please tell me Vigilante is on there its one of the best games for the System???

Was looking for a tutorial and this worked perfectly thank you! (seeing K.I.T.T was the highlight of the video, 🔥☝️)

2024 and this walkthrough still works perfectly

How did you connect it to your phone? I could see it on my WiFi pairing list, but when I clicked it, it says "No device connected for now, go to home" on the app and "Connected without internet / Not secured" on my phone... I cannot connect the device to my phone thus renders it useless for me, since the whole reason I bought it is to upload my own image to the mask.

I bought this to do exactly what you have in mind

My heart sank when I saw this video. I thought it was going to be a straight forward 2032 replacement and then I saw the old one is soldered into the bloody board. Typical!! Where did you get the battery holder if you don't mind me asking and do you have a link to it?

i was just told that i can’t use the miracle software by a computer repair store

Once setup it works marvelously nice. However, i had a hard time inserting the ribbon properly. If not perfectly aligned, the drive seems to work but behaves like it is misaligned and can't pass the tests within DrawbridgeWin. I would have loved to use something else than these slim drives and be able to use a classic 3,5' drive in a nice external case with a header easier to handle.

Update on these drives. I've found the chances of getting a drive that will work is not guaranteed. I ordered one from Amazon from a recommendation and it was the correct one. Three months later I reordered the same thing and it had the wrong connection. Now three tries later and I have found a second one that works. So 2 of 5 were the correct drives. Two hints on putting this back together. One make sure one of the small wires doesnt cover the screw hole. Two when sliding the top cover back on make sure the eject button goes into its slot. You did mention both of these.

Thank you so much coming from the Netherlands. What an excellent explanation and guide. Patiently and diligently follewed it and it all worked out. Hope to still be round in 30 years time to replace the next battery and then be happy about the changes made.

I wonder how insane performance one could get if an absolute top of the range FPGA running at highest possible clock rate was used...

Very helpful, thanks. I also have an OSSC with a 1040STE and would like to switch between low/med and high res using a UBESwitch, just as you have here. Could you tell me which OSSC settings you use for the Atari High Res image? e.g. Line Mode and aspect ratio etc. Some people say for best results in high res mode I should use a VGA2SCART adapter between the ST and OSSC, is this correct?

I have a samsung s22+. I downloaded scummvm from the app store and made a seperate folder for the games in my internal storage folder. I access it through the scummvm app and select the folder with the game(beneath a steel sky from scumvm freeware website link) it says no games in folder. I tried the ARMv7a version as well from their website but it still doesnt work.

Thanks for sharing. Does this also work with Cyberlink Media Suite? Have u tried this with any of the Adobe Cloud products such as Premiere and Adobe Audition? 😎😎

Had mine for about 6 years finally got ahold of a good CRT TV with composite inputs game changer

Just did this exact thing thanks to your video - Thanks for such a well put-together and clear piece of work :)

good vid, is that custom eproms I see there?

Hey! i'm 5 years too late but i figured i'd shoot my shot. For our game we are going to use this little device and it just came in! I wanna do the same thing as you do on the video but with a EU Adapter. I was wondering if i need to solder the black cable on a different pin or if i just solder it on the same pin as in the video? The only difference is the EU Cable, which is 220-240 Volts I've been scouring the Manual of the SC88 pro, but i just can't find the exact place for the pin on there. Maybe you know? Thanks so much for your help!!! This video is the best help ever because without this i wasnt even able to figure out how to do this in the first place!!!

I still need help dont understand 😅

Does anyone know anything about replacing microswitches in the Epyx 500xj joysticks? Can't find any videos or much info online. They use a French Brand called Crouzet. Anyone know where to find comparable microswitches? Thanks.

I nearly just bought one with frosted glass thanks

what game files are required? I guess .iso or .exe won't work on mobile

Nice, very useful.

I got my cartridge 2 years ago and it looks identical to yours, except the 3.5mm audio jack was already installed. I had never seen a C2 without one.

Sticking an M.2 in an Amiga is worth it just for cool points.

Very well done! Not only shows how it works but also how it is made. Helped me very much. Thank you .

Great job !! I just started using my MU 80 and the battery life started flashing on . I ordered the new battery button holder with 2 pins and a new battery. Can’t wait to get this project started and done!!

Hi! Is there a link to download this CFW? The original links are down, and there's not other places to look for it.

This is nice. I've just pulled my C128s out of storage where they've been since February 2000. I'm blown away by all the new stuff that's available for my fun, old machines!

The intro ist stable 👊

nice video

My usb cable is broke so now are my peddles why logitecth keeps hardwiring devices boggles my mind this aint that old

I love it it works

Any update on this pedal? Does the pedal still working after 2 years use?

Me and my friend Jeff used to log onto the local BBS back in the day and download software (ahem!) to try it out on my 300 baud modem and my C64. We'd wait for AGES for a game to download, then load it up and....it wouldn't work half the time. Still, I remember those days with fondness. Some of the PETSCII BBSes did some very clever things with PETSCII animation. I was in heaven when my mom and dad bought me a 1200 baud modem for Christmas.

Hello there, thanks for this explanation. I have a fire stick where they hide developer options, but I found a fix by clicking 7 times on the My Fire TV Stick. I wondered if there was a way to do this with any assistance from ethernet connection? My wifi isn't great, so considering ways I could boost the quality of the games coming here... Thanks!

Why would I want rubbish to go viral. If the emitter goes through solid plastic, What is a rubber cover suppose to stop?

Wow great video, mine has same problem! Door won’t open and record button stuck down, can you fix? I’m in UK, can post

Will NES controller work in window 11 laptop with RS232 db-9 female serial adapter to usb cable ? Plz reply

THANK YOU MAN!!! IT WORKS!! 👍👍👍