Great video. If you put the metal rod your cutting next to the teeth on the vise it will keep it from vibrating like that. Other than that solid build.
@nazimbaluch6020Ай бұрын
Thank you for sharing this project
@dinaidafigaroa620Ай бұрын
This is what i’ve searching for👍🏼👍🏼👏🏻👏🏻👏🏻👏🏻👏🏻 they are both nice, but my choice go for the oval shape😍 Thank you very much. Blessings❤️
@stevefagnanoАй бұрын
how long is the runner
@brijfurnitureharmara5516Ай бұрын
Nyc work ❤
@mohammedasifbiggyАй бұрын
Should have made it foldable legs
@meilyn222 ай бұрын
Do some butt joint. Everyone knows how to do this already..
@drewjohnson46733 ай бұрын
The “why not” actions confuse people who are struggling to understand the necessary things!
@ivancespedes46243 ай бұрын
Do the joints need to be glued? I want to use this for a pool table frame. So I want it to be and easy to disassemble table
@KimHemry4 ай бұрын
Can this bed frame have larger legs without tipping, I have a doggie sofa and want to raise it higher to my bed, Can you make one and sell it to me since I am a woman
@carolestewart28674 ай бұрын
Love
@ping1704 ай бұрын
Nice stand 👍The problem while cutting the rod was not with the saw but with the clamping method: clamp the rod closer from the cut to reduce vibrations 😉
@zukobuilds44694 ай бұрын
Thanks! I started working at a fabrication shop so my knowledge with metal work is far greater now 😂 Lessons lived and learned!
@emilyburnias28304 ай бұрын
I enjoyed your video. It was Honest, You admitted to mistakes and told us what to do and not to do. This is Good. You're down to earth kinda a guy and it's so appreciated. You were pleasant to listen too
@zukobuilds44694 ай бұрын
Thank you for the kind words! I'll be making videos again very soon so stay tuned.
@28Coves5 ай бұрын
Great tutorial thank you !
@kdove21106 ай бұрын
Thank you!
@strawberrymelon85277 ай бұрын
this was so helpful! thanks
@kevinkilmatin6287 ай бұрын
Excellent explanation
@charlesdjones17 ай бұрын
"While I was learning." Definitely appreciate the honesty. I am certain 90% of YT woodworking content creators are just the same, based on the newness of their tools and shops, but would rather fake the funk and pretend they are "professionals" but in reality they just watch another person's channel, fork their content and post it on their own.. I see that all the time on cabinet builds.
@jontorres87678 ай бұрын
I like your channel. Why did you quit making videos?
@nore81418 ай бұрын
I had an idea of the how to but this definitely helps. By the way the ink on your arms have a meaning to it?
@nore81418 ай бұрын
Like the jig, looking into making some castle joints for a desk. Also just subscribed to your channel
@raobilal76098 ай бұрын
Sir size?
@bekhtiabdmalk26918 ай бұрын
Good men 🎉
@СергейСуворов-р5я9 ай бұрын
Хуйня , не чистая работа , делитант будет нас учить , иди учи уроки , завтра в школу .
@tenkill9 ай бұрын
outstanding! Thank you for teaching me!
@jfaz779910 ай бұрын
You didn’t mention how to measure for bowl. Does the bowl sit at the bottom of the stand or does float off top of the arms of the stand. It’s hard to tell from the video.
@skibpiki10 ай бұрын
I have never seen such a broadway production for something that should take 20 mins....its truly exhausting to watch
@zukobuilds44694 ай бұрын
Thanks for your opinion! At the time of this video I had barely used a saw for the first about year ago. This video is for absolute beginners and it seems like you're more advanced.
@muradozkoc10 ай бұрын
Congrats 👏👏👏 Could you write the dimensions of the materials used in this project?
@bdlii10 ай бұрын
Thank you! Wonderful demonstration and clarity. Need to do this on upcoming project and had no idea how I was going to do it. Thank you again.
@estellaramirez11310 ай бұрын
I love it Thank you
@frankguo174811 ай бұрын
I like it. It is a simple build with just some general tools but still looks pretty good with the raw wood style.
@gsilcoful11 ай бұрын
Thanks.
@yolandagofigure11 ай бұрын
Awesome..Ty.. I'll be making these for my daughter's dogs.
@JoshD4PREZ Жыл бұрын
Thank you for this, hopefully I can get around to starting it this weekend! I like your shop layout too, everything looks very well organized 👍
@JoshD4PREZ Жыл бұрын
Looks awesome and so much more safer than how I was originally going to go about doing this lol. I’ve seen ppl use everything from a radial arm saw to a multi tool to hog out the cross sections. Your way with the jig will allow me to do this without needing any additional tools! Thanks for sharing! 👍👍
@wrecknrun6561 Жыл бұрын
Fantastic. Thank you so much
@zekonejo Жыл бұрын
How much would you charge for this?
@HOBI-KAYU Жыл бұрын
Keren👍
@J.H.McCardle Жыл бұрын
Good stuff, young man.
@gsp911 Жыл бұрын
Nice and simple project. I'm going to get started on that one. I think I will make the right side so that it can open with a small storage space for paper, pens etc. Maybe folding legs too. Thanks for the video. 👍
@adamthewoodworker2571 Жыл бұрын
Is your name actually Zuko? I bet you got all the girls in middle school if so lol
@Dragon-Slay3r Жыл бұрын
😁
@direwolfwoodworking Жыл бұрын
Hey I just wanted to say thank you. I was able to watch your very informative video and cut out an oval for a sign lickity split. This is an image of the piece I cut drive.google.com/file/d/1_WHZeU-j9xMNxgaBOJSLrXTra6y12w6V/view?usp=sharing.
@billparrish4385 Жыл бұрын
I can't picture how a miter saw insert prevents tearout, as such an insert does on a table saw. On a table saw, the direction of spin has the teeth closest to you going down into the as-yet uncut part of the board as you push it into the blade, cutting the edge of the board farthest away from you, so that when the teeth emerge on the bottom of the board, a zero clearance insert supports the wood fibers on each side of the cut. However, on a miter saw, the blade's direction of spin also has the teeth closest to you going down, but now the cut is starting on the edge of the board closest to you, with the teeth on the bottom and furthest away from you doing the cutting, scooping away from you and up through the wood. A zero clearance insert would prevent tear-out only for the teeth closest to you cutting down through the wood and emerging on the bottom of the board, which doesn't happen in a normal cut (i.e., nearly none of them). The only scenario where the teeth closest to you would be cutting fresh wood and emerging on the bottom is where the board is wider than the diameter of the blade, and where you start the cut with the saw pushed all the way away from you, plunge it down through the board, then pull it toward you, cutting the closest few inches of this extra wide board essentially backward from how one normally uses this saw. The normal way, pulling the saw all the way toward you, pushing down, then away from you, has the teeth closest to you going down not into fresh wood, but into the kerf already cut by the blade. The cutting is done by the teeth on the bottom, and farthest away from you, which scoop away from you and up, emerging from the top of the board on the far side of the blade. So again, since the teeth that go down, almost never cut through uncut wood fibers, how exactly does a zero-clearance insert on a miter saw prevent tearout?
@zukobuilds4469 Жыл бұрын
Thanks for the detailed explanation. I'm just speaking through my own experience, but since I started making zero clearance inserts, the bottom and edges furthest away from me have been coming out much cleaner. That's because the fibers are being supported on the bottom of the material where the blade passes through. When I added a zero clearance fence, I haven't had any tear-out where I usually would before. Once again, that's just my own experience.
@antonyjones13129 ай бұрын
Probably why loads of decent woodworkers use them
@Benmeglei1 Жыл бұрын
Beautiful work. Can I ask where did you get that veneer from?
@zukobuilds4469 Жыл бұрын
Thank you! I got it from my local lumber yard. Most lumber yards will have a selection of veneer.
@tchesstc Жыл бұрын
Thank you...for this simple but very helpful lesson.
@maremohr9911 Жыл бұрын
Super easy and buttery smooth is something I can work with. Thanks. I want to make a new bed for my chihuahua.
@shawwoodworkingdiy Жыл бұрын
i like how simple the assembly is for the chevron pattern is, i will be making an ultimate workbench soon, with a flip up mitersaw, tablesaw, router and Diy bandsaw on it... il be making a chevron edge banding for my workbench mdf top il be using..its goin to be the most ultimate one uv ever seen bro!! hehe thanx for the inspiration bru
@shawwoodworkingdiy Жыл бұрын
congradulations on 1k subscribers bro!! thanx for the dope vid, im also new on the Tubes... started my channel recently, you are inspiring my brother... keep it up!
@marcialabrahantes3369 Жыл бұрын
Where ya at
@zukobuilds4469 Жыл бұрын
I hit a bit of a rough patch recently so I'm trying to get back on my feet. Currently planning out the next videos that I'll HOPEFULLY be able to start and shoot soon. In the mean time, what's something you'd like to see? Something small or maybe some more tips and tricks?
@marcialabrahantes3369 Жыл бұрын
@@zukobuilds4469 Thanks for replying! I'm trying to duplicate expensive IKEA wood products... saw Wood Slat drawer doors, Chevron Pattern Cabinet Doors, etc Wood slat either fully custom or applying as a layer from a processed slat layer should be cool no matter what as it's popular these days
@zukobuilds4469 Жыл бұрын
@@marcialabrahantes3369 Is that something you'd want to see a video on? If you have reference photos- feel free to send them over to my IG! ZukoBuilds on everything.