Thank you so much! Hope all is well!

Thank you very much for this video. I was at my wits end and it just so happened that the group on my TTL was not the same one as the XPro.

My nikon x1 T is not connecting to ad200 pro but with godox v860iii it's connecting i checked all the settings on my ad200 as well as on x1 T trigger but still the godox ad200 is not connecting eith the x1 T trigger

Could this work with Sony send to Nikon reciever? (All Godox)

Thanks you answered my questions perfectly.

Guys, I found something that worked for me. I did everything like in the video. When I was installing the software, I didn't notice that shortly before the end of the installation, the drivers could not be installed. So I had to turn off the “Driver Signature Verification” that prevents them to get installed, via CMD. And now it works

Is it still worth it in 2024?

This is the most ADD tutorial I’ve ever seen.

It took me a couple of tries, but I did it! Thank you, How do you set up multiple flashes? I have another shoe mount flash and a big one that originally used in my little studio. Thsnk you

It took me a couple of tries, but I did it! Thank you, How do you set up multiple flashes? I have another shoe mount flash and a big one that originally used in my little studio. Thsnk you

If anyone is facing my same issue with windows 11, when I connect my device to my pc the G2 software is not recognising the godox product. In order to let it work you have to disable the core isolation in device security. In order to enable it again you have to get rid of the drivers of the G2 software after you updated. I hope this might help someone else.

Thank you for a very useful and pedagogical video. It helped me a lot to understand how the Metz flash and my old Nikon camera will work together. Greetings from Norway

Thanks a bunch

In Slave mode is it normal for the red backlight focus assist lamp to be continuously blinking? If I change it to master mode then this blinking stops.

Thank you so much. I can get started after watching your lesson.

Fascinating information! ❤

Sorry but this is a very very bad explanation of the working, sorry.😢

Dopo aver visto tanti video a proposito pensavo che il mio flash fosse difettoso. Ma poi tu mi hai fatto scoprire l'ID! Grazie!

Thank you! Your demonstration was very easy to understand. Just received an X1R N and a X2T N. I will use them on my D850 with my SB-900 and SB-800. You saved me a lot of time.

Super helpful!!! I was able to get my flash and trigger set up so easily! Thank you!

I haven't used my flash/ trigger in a few years, I could not get them to work, your video was clear and got me firing again!!! thank you

I have nikon tt685 and error E2 comes when i inserted battry and on flash error E2 shows

These instructions are great. I could not make my Xpro 2 work with my new TT350. lt was driving me crazy. Then I noticed the ID numbers were different. Viola! I'm up and running! Many thanks.

1:37 third reason - bug fixing

thank you for the lecture

So sad this legendary manufacturer coudn‘t keep up with asian production costs. I got two Metz in my bag and they‘re the most reliable flashes I‘ve used.

Thanks for video. Does XPro support HSS with TT600? (of course with the nikon camera set to HSS)

very helpful

Thanks so much for your videos! I like how you made it easy to find exactly the answer I wanted, in a hurry!

Starts at 4:10

How do you change the TT685 II to slave radio mode?

Hi, Thanks a lot for the hint using the right click to intstall and to open the program file for update! With simple click I spent hours suffering unable to connect the flash to the program! Also thanks for the other hint, not to use the godox program but the flashpint one! with these tricks I was able to update the godox v2.1 firmware within a minute! Thanks again!!!!

Thank you 🙏

Thank you so much for providing a clear video of how to set these up . Very much appreciated.

Go to Softpedia

USB charging is green fully charged ?

MyAd 600 bm screen lights up but doesn’t show any text. What you think is the problem? Thanks

Thx for the video 😊

Thank you very much it was a great help for me - Your explanation is very professional - Greatings from lake constance

Quick question, how do you handle TCM with different flash units ie 100pro, 200pro? Or it is only valid for flash with same power unit?

Good instructions. Just helped me to set up mine. Thank you

1. mine doesnt look like yours... it's not in TTL mode.. zoom is not in Auto mode but Manual. Thta's how it was when I turned it on first time and for the love of god i cannot change it. I cannot get the big TTL letters.. only M mode or Multi mode.

Very helpful I learned something with your video 🙏👏

Already subscribed 👍

I have the same camera x-E3 I was thinking to sell it to buy one of the new ones but I think I will keep it. Thanks for the video

Awesome great tutorial and very easy to understand. I wanted to ask you the power of the flash, at 1/16 is that the max power or is the least power never understood how it works. Thanks for doing this video

I came here looking how to sync my Flashpoint R2 to my Flashpoint speedlite, and at no point did you mention how to get the speedlite to sync to the Nano, which mostly makes this video useless for us beginners. Now I have to go find somebody else's video, and I'll skip any of yours. In hindsight, you should include the speedlite sync with the Nano overview, otherwise it's a pointless explanation as I have a useless Nano until I can find somebody who explains the basics. PS: I'm not trying to be a jerk, just pointing out this video doesn't help anybody, it's a half assed explanation

THANK YOU SO MUCH FOR THIS VIDEO! I am glad I found it 😊

This flash works perfectly with the users of the device canon 250D (Canon SL3). Just instal firmware 1.7

I found this video while attempting to update the firmware on a few of my Godox items. Sadly for me none of these things worked, reason being when installing the software for the G1 Godox app, the drivers failed to install. This was for both my windows 10 and 11 PCs. You could see that in the install window, red X drivers failed to install message. Because these are unsigned drivers windows security prevents them from installing. What worked was disabling the driver signatures temporarily, then when I installed the software the drivers successfully installed and I was able to update no problem. This was not an issue with the G2 software for some reason when I upgraded the control module. You can google how to disable driver signatures and find all sorts of info however in a nutshell: Choose Troubleshoot > Advanced options > Startup Settings and click the Restart button. When your computer restarts you'll see a list of options. Press F7 on your keyboard to select Disable driver signature enforcement. Your computer will now restart and you'll be able to install unsigned drivers