Пікірлер
@paularc1899 24 күн бұрын
No sir. All you had to do is drain 3 qts of the trans fluid.... then refill it including using 2.5 qts of Nissan juice with a bottle of Lubegard 60902 fluid. Boom badda BANG.... drive 30 miles and watch your trans problems disappear.
@HawksDIY 24 күн бұрын
That mixture sounds spicy! lol I have a follow-up video coming next week. The transmission is fine and operating flawlessly. Stay tuned for the update! Thanks for watching! 👍
@yournightmare9999 24 күн бұрын
Next time don't buy American,Korean, Mexican junks
@michaelpiwcewicz1412 24 күн бұрын
YOUR OVERDRIVE/// FUSE //RELAY TAKE IT TO AUTOZONE
@HawksDIY 24 күн бұрын
Thanks for the suggestion! 👍 I have a follow-up video coming next week. The transmission is fine and operating flawlessly. Stay tuned for the update! Thanks for watching! 👍
@270eman 24 күн бұрын
Maxlife ATF is a good alternative to the expensive dealer stuff. Shifted smooth
@HawksDIY 24 күн бұрын
Thanks for the suggestion! 👍 I have a follow-up video coming next week. The transmission is fine and operating flawlessly. Stay tuned for the update! Thanks for watching! 👍
@jamesfeeney7903 24 күн бұрын
Yes your an idiot! Maintenance is everything!
@Jay-nc7vk 24 күн бұрын
Boy, that's cheap, right? $16.00/quart...puke!
@HawksDIY 26 күн бұрын
If you like this content, please subscribe! It's free! Thanks for watching!! 👍
@ryzencorp8182 Ай бұрын
Why would you need to keep tension on the neck? You remove tension all the time when using the trem
@HawksDIY Ай бұрын
It helps maintain stability with the tremolo and the neck because it maintains 440 tuning throughout the process. It's not such a wild environment change for the guitar. Just MHO. Thanks for watching!! 👍
@mikewaldrop3417 Ай бұрын
Liked the video on the install…. Getting ready to install the same mount bit the triple mount instead of the dual…. How is the mount working for you… looks sturdy. Any regrets on the install? Thanks again
@HawksDIY Ай бұрын
No regrets! I really like my dual mount! I'm getting ready to install a 12" Garmin for Forward Facing Sonar, so I haven't used the mount with two graphs yet. However, I don't ever expect to have any issues. The BassFishin Electronics dual mount is made with 1/4" powder-coated aluminum which is very strong and durable. Thanks for watching!! 👍
@HawksDIY Ай бұрын
If you like this content, please subscribe! It's free! Thanks for watching!! 👍
@ProstheticsandOrthotics Ай бұрын
Thank you
@HawksDIY Ай бұрын
No problem! Thanks for watching!! 👍
@stevenolan2872 Ай бұрын
You sound like Dale from King of the hill. But good video
@HawksDIY Ай бұрын
LOL Thanks for watching!! 👍
@politorres9280 2 ай бұрын
😅 66 degree and you not even cold man, if I was there I'd be freezing mi ass, for me to be outside it' gotta be over 75 😂to feel good and nice for me
@HawksDIY 2 ай бұрын
Everyone has their comfort zone I guess! Lol Thanks for watching! 👍
@ElizabethLong-n8k 2 ай бұрын
Thanks it's really helpful we may have the same problem
@HawksDIY 2 ай бұрын
You're welcome! Thanks for watching! 👍
@badmacbassandbass8118 2 ай бұрын
Why not just adjust the jackplate? You know you can raise the mortor using that jackplate.
@HawksDIY 2 ай бұрын
The motor wasn't originally mounted in the center hole. So, now the motor is better balanced onto the jackplate compared to its previous location. Thanks for watching!
@Curios0ansios0 2 ай бұрын
Love to see your 🫳 hands when you're working 🫶
@HawksDIY 2 ай бұрын
Thanks for watching! 👍
@hawkeyemarine 3 ай бұрын
Caught my crack!
@HawksDIY 3 ай бұрын
Ha! Didn't notice that! Full moon in Jeffreyville! LOL 😂
@jerrysingleton8240 3 ай бұрын
Was your Nissan idling rough when at a stop light ? I have had the crankcase sensor and camshaft sensors replaced but occasionally still idles rough. You can watch the voltage meter drop a bit when it does, but smooths back out. Been doing this for a while. Maybe PCV valve then?
@HawksDIY 3 ай бұрын
No, I haven't experienced rough idle. A voltage meter will naturally drop with a rough idle or an engine struggling to run. A PCV valve merely ventilates the crankcase by recirclulating the gas vapors that did not combust on initial combustion in the piston chamber. Thanks for watching!
@urkool7543 4 ай бұрын
That boat launch looks familiar lol. Hate loading my boat, thanks to your video I’m looking into one !
@HawksDIY 3 ай бұрын
I take it you've launched there a few times. lol I'd feel naked without my drotto! Makes launching easy for us old fellas! Thanks for watching!
@RTerrence 4 ай бұрын
Good video. I have a Mercury 250 xs that has never gotten up to wide open RPMs which should be about 5600. I’ve had the fuel injectors sent out to be cleaned and flowed. That didn’t help much still low RPMs. Compression is good on all cylinders. I did a drop test on each coil and they were ok. Is the drop test a reliable test for the coils or should I use the resistance test too?
@HawksDIY 4 ай бұрын
A resistance test is more thorough, but takes a lot longer to test. A resistance test will undoubtedly find an intermittent coil, whereas a drop test will only test for a potential voltage drop. Thanks for watching!
@terrymunn1224 4 ай бұрын
was ther much fuel come out the filter side of the vst.Ive been having problems and it could be fuel delivery.two didderent times i was at the vst and there was almost no fuel come out the filter side and lots on the pump side
@HawksDIY 4 ай бұрын
I had fuel flow fairly evenly on both sides from what I remember. Have you replaced the filter? Sounds like you might have a restriction on the filter side. Thanks for watching!
@back2basics668 4 ай бұрын
That thing scuffs the hell out of your bow!!! WTH??
@HawksDIY 4 ай бұрын
No, the scuffs were there prior to the install. The scuffs were there before I purchased the boat. Thanks for watching!
@back2basics668 4 ай бұрын
@@HawksDIY good to know , will this handle a 25’ sea ray sundeck 240?
@HawksDIY 4 ай бұрын
@@back2basics668 , yes, you'll have to measure your bow roller bracket on your trailer to know what model to purchase.
@back2basics668 4 ай бұрын
@@HawksDIY thanks man great video btw!
@HawksDIY 4 ай бұрын
@@back2basics668 , thanks! 👍
@raisingcane225 5 ай бұрын
I have a pair of 2005 225 Optimax’s owned since new. All coils were good but I was not reaching my normal max rpm’s at WOT. While I have changed out the plugs several times, I had never changed the spark plug wires. Upon changing the cables, problem solved with full expected max rpm’s at WOT (in my case 5400 rpm’s) and a noticeable increase in power across the rpm range.
@HawksDIY 5 ай бұрын
That's awesome! Those spark plug wires are just as important as the coils! Thanks for watching!
@OJHussick 5 ай бұрын
Surely multiple cables in one glad results in gaps between the cables?
@HawksDIY 5 ай бұрын
The Scanstrut cable seal does a great job of sandwiching the cables together inside the seal creating a water tight seal. I've yet to have any water leak underneath. Can't ask for much more than that and they look nice too! Thanks for watching! 👍
@christianclark9521 5 ай бұрын
I have a 2004 efi motor with coils that have 5 pins and are identical looking to yours, if they’re all the same, all of my coils fail the pin D test. Do you think they are the same coils and all of mine are actually bad or do you think my coils are different? As far as I know all the two strokes used the same coils
@HawksDIY 5 ай бұрын
Are we talking about a Mercury motor? If ALL of your coils fail the pin D test, then I don't see how your motor would run at all. Does the motor run?
@jwheatley101 6 ай бұрын
Can you post the ohm resistance specifications for the driver dual coil which has a 4 prong and 2 prong connection then the coil itself which has the 3 prong connection
@jwheatley101 6 ай бұрын
I have an 2004 optimax 200hp with the other style of coil.
@Monee1885 6 ай бұрын
It’s not that easy! The pcv valve is almost impossible to get too. I had to take off the heater core inlet and outlet to reach it.
@HawksDIY 6 ай бұрын
Yes, the PCV valve is in a bad location, but I didn't have to mess with the heater core. I used a special socket wrench that adapted to the horrible angles. I hope you were able to get it fixed! Thanks for watching! 👍
@rex2837 6 ай бұрын
Pretty cool
@HawksDIY 6 ай бұрын
Yep! Makes boating so much easier. Thanks for watching! 👍
@allkindsofoutdooractivities 6 ай бұрын
Really nice!
@HawksDIY 6 ай бұрын
Thanks! 👍
@allkindsofoutdooractivities 6 ай бұрын
@@HawksDIY welcome!
@allkindsofoutdooractivities 6 ай бұрын
Really nice installation! Good instruction
@HawksDIY 6 ай бұрын
Thanks! I wish I would've included footage of launching the boat with the drotto. I may do that in another video. Thanks for watching! 👍
@allkindsofoutdooractivities 6 ай бұрын
@@HawksDIY hope to see it! And thank you for the sub!
@L3Dhelpguide 6 ай бұрын
The tabs on the filler washer were to keep you from sticking your fingers in the hole to line it up.......just sayin.
@HawksDIY 6 ай бұрын
Yeah, I realized that after I did the video. Learn as you go. Thanks for watching!! 👍
@josephwilliams2633 7 ай бұрын
Looks like it’s gonna scratch your boat to hell and back
@HawksDIY 6 ай бұрын
It actually does the opposite. If you look at my boat, I have damage from the previous bow roller. My brother has owned one now for several years and has zero damage. Thanks for watching! 👍
@melvinrawlings1457 7 ай бұрын
New subscriber here I just want to say im glad I came across ur channel. I love all ur boat content. It's always good to watch a video on somebody else doing the work that ur about to do on ur boat. To show u some tips and tricks on how to do so. I'm glad I stumbled across this video and look forward to more content. Keep up the great work and dedication to the channel content. And much love to ya from Maryland❤❤❤
@HawksDIY 7 ай бұрын
Thank you so much! I'm thrilled you like the content! I always try to go the extra mile to provide helpful and hopefully enjoyable videos. Thanks for watching!! 👍
@officialdrotto 7 ай бұрын
Great video! Thanks for sharing!!!
@HawksDIY 7 ай бұрын
Thanks! Glad to share! I love your product! 👍
@bigham1jb 7 ай бұрын
IWon't have a boat trailer without one. If you fish solo it's really great. I moved the winch post forward when I put it on my Ranger. On my 194 ChampioN it worked without moving it. However the boat was plenty forward on the trailer. Put a short rope with a hook on it for the latch handle. Makes it a lot easier to pull on the way to the drivers seat.
@HawksDIY 7 ай бұрын
I agree! I won't have a boat without it. I'm an older guy so anything to make it easier is welcomed. Thanks for the great suggestions! My brother uses a short rope on his Champion bass boat as well. I'm hoping to get on the lake next week to use the system some more. Do you stll have your Champion? Thanks for watching! 👍
@peggycotton7777 7 ай бұрын
We added steps to load and unload, never get your feet wet again! We love our Drotto!
@HawksDIY 7 ай бұрын
That's awesome! I think the Drotto is well worth the money. Such a good investment for your boat. Thanks for watching!! 👍
@CryptoGhostie 7 ай бұрын
I installed one on my trailer two seasons ago and has worked perfectly ever since.
@HawksDIY 7 ай бұрын
That's great! It just makes loading and unloading so much easier! Especially when the boat ramp is busy. Thanks for watching! 👍
@ranger178 7 ай бұрын
interesting gadget too bad i can't climb out of my boat onto trailer have to drag it on with rope and winch it last couple feet
@HawksDIY 7 ай бұрын
Well, with this device you won't have to! The Drotto is designed to hold up to 7,000 pounds once it locks into place. You can pull the boat out of the water at that point and then attach your wench strap and emergency chain later. I only attached the strap and chain because I was already standing there. Thanks for watching!! 👍
@ranger178 7 ай бұрын
@@HawksDIY if I drive boat onto trailer how do i get from boat into my car to drive car up ramp without climbing out of boat onto trailer
@HawksDIY 7 ай бұрын
@@ranger178 , good question. Ultimately, you'll have to get out of the boat, but you don't have to worry about attaching the wench strap or emergency chain. The Drotto is rated to hold up to 7,000 lbs which is way above the weight of most boats. Another good thing is the Drotto positions your boat on the trailer perfectly every time. That's a bonus right there! It also rides better driving down the road. No more struggling to get your boat positioned on the trailer correctly. The Drotto takes care of that!
@mseller12 7 ай бұрын
Interesting device.
@HawksDIY 7 ай бұрын
Yes it is! My brother has one on his bass boat so I've used them for a while now. They work great! 👍
@martinfromseacity2010 7 ай бұрын
Thanks, good info
@HawksDIY 7 ай бұрын
You're welcome. Thanks for watching! 👍
@AlexReeceOutdoors 7 ай бұрын
Want to sell your champion 198?😂
@HooksetHawk 7 ай бұрын
Ha! Heck no! lol 😂 Champion boats will become extinct as the years go by.
@AlexReeceOutdoors 7 ай бұрын
@@HooksetHawk had to ask😂
@HooksetHawk 7 ай бұрын
@@AlexReeceOutdoors , yeah I know. Can't fault a guy for trying! lol 😂
@AlexReeceOutdoors 7 ай бұрын
@@HooksetHawk what is your top speed on the 198?
@HooksetHawk 7 ай бұрын
@@AlexReeceOutdoors , I'm not sure. The Mercury 225 has a max rpm of 5750 and I have never gotten anywhere near that mark. Probably the highest rpm's I ever ran so far is about 5200 and was running about 64 mph. I don't push it too hard because these motors are expensive!
@AlanMartin-nh9yi 7 ай бұрын
Did you ever resolve the slight missing issue?
@HawksDIY 7 ай бұрын
Yes, the slight miss is gone. The new plugs and coil solved the issue. Thanks for watching!! 👍
@DavidFrazier-os8vg 7 ай бұрын
It would be more helpful if I could see how to do that,I'm just guessing how watching this video.
@HawksDIY 7 ай бұрын
I couldn't get the camera in the tight spot where the pcv valve is located. Thanks for watching! 👍
@scanstrutltd6804 7 ай бұрын
Thank you for the review! Great looking install!
@HawksDIY 7 ай бұрын
Thanks! I couldn't be any more pleased with the product! I needed something more professional to manage the number of cables I had to install. These were perfect! 👍
@dewrelld 8 ай бұрын
Is that a 20 or 25” shaft??
@HawksDIY 8 ай бұрын
I think it's a 20" shaft. You have to measure from the base of the water pump to the top of the shaft. Thanks for watching!!
@michaelwilsonbarber 8 ай бұрын
Pretty damn good Chuck thanks for sharing!
@HawksDIY 8 ай бұрын
Ha! Glad you liked it! I have fun doing these videos. Thanks for watching! 👍😎
@michaelwilsonbarber 8 ай бұрын
@@HawksDIY I assume you found the missing screw? That happens man, like you said, not sure how but it sure does!
@HawksDIY 8 ай бұрын
@@michaelwilsonbarber , yeah I found it! I played the video and noticed where it had fallen out onto the deck. Good thing I had the camera running! lol
@infidel777patriot3 10 ай бұрын
I really enjoyed watching this video. But I couldn't help ask the question. Are you guys smoking the green stuff. Just saying maybe that's what made it so enjoyable.
@HawksDIY 10 ай бұрын
Ha!! Nah, we just enjoy life and act ridiculous! Lol 😂
@ivorferrance 8 ай бұрын
This thing is boring like hell. I really think these guys are drunk.
@chezleymcdonald2481 10 ай бұрын
The prop shaft should at least be even with the pad, with the right prop, with the set back you have shouldn’t have trouble getting water
@ronny8383able 10 ай бұрын
Great video! I need to see if the standard applies to bay boats?
@HawksDIY 10 ай бұрын
Glad you liked the video! I'm not sure about bay boats. I've never worked on them. Thanks for watching!
@TheChodsr 10 ай бұрын
Great video Iooks great!
@HooksetHawk 10 ай бұрын
Thanks! I'm happy with the results! I kinda got frustrated with four days of rain in a row which made the project longer to complete. But, other than that, it went pretty smooth! Thanks for watching! :)
@HawksDIY 10 ай бұрын
Thanks! :)
@TheChodsr 10 ай бұрын
I forgot to ask whereas I will be installing a solix.Is your battery specifically for fish finder.Was hoping I didn’t have to purchase separate battery