I really liked the color before you put red in it, so I tried replicating it for my sks stock but I think I messed up somehow. The 50 50 coat came out really sticky and gooey, I wanted to ask if you have any tips for me. Also what did you use to apply that tar turpentine mix?
@2lbsTrigrPull20 сағат бұрын
I used a piece from a dish sponge to apply it. You can also use a brush. You need to stir the mix up well so it becomes one liquid. Otherwise you end up just having the gluey black tar and the watery turpentine. Also are you using real turpentine or this substitute stuff? If your turpentine smells like freshly cut pine tree it's the right one if it just smells strongly after chemicals it's the wrong kind.
@michaelpogwater613516 сағат бұрын
i used real turpentine, after watching your video I think I put way to much on so imma try to use a very thin coat next time. Thanks for the help.
@2lbsTrigrPull12 сағат бұрын
@@michaelpogwater6135 Should work. ^^
@manuthapa4282 күн бұрын
Wow i need
@Urbex_Explorations_PT5 күн бұрын
Can I put a sling on it?
@kumalajaya31366 күн бұрын
Is veri good
@2lbsTrigrPull6 күн бұрын
🤜🤜
@BattleMachine3916 күн бұрын
I got an lct and it is piece of sh&t
@2lbsTrigrPull6 күн бұрын
😄
@WatchOutPoison8 күн бұрын
Hast du jemals drüber nachgedacht aus der AKM ne AKML/AKMN zu machen? Also halt ne dovetail siderail?
@2lbsTrigrPull8 күн бұрын
Ne, will da eh keine Optik dran haben. Die Dinger sind nicht so geil für Optiken, deswegen lasse ich das sein. 😄
@WatchOutPoison8 күн бұрын
@@2lbsTrigrPullAh okay verstehe ☺️ danke dir für die Antwort!
@peterconnor41939 күн бұрын
Great video
@peterconnor41939 күн бұрын
Just ordered a hw95 and found your channel, thank you for thd the excellent videos
@peterlewon79569 күн бұрын
WOW! Worst video I've ever watched. No indication or audio indicating what he's doing, why he's doing it or what he's using. And this is helpful how?
@2lbsTrigrPull9 күн бұрын
Thanks for watching! 😁
@DemonicAngel.10 күн бұрын
Obviously you’re going to have an issue with the bullet Feeding through if you’re doing it slow motion you have to do it quicker like a regular shot
@franktuin380910 күн бұрын
Great, thanks. 👌🏼😃
@2lbsTrigrPull10 күн бұрын
😁😁🤜🤜
@TheGoodfather197211 күн бұрын
Nice work. Did you sell it? 😬
@2lbsTrigrPull10 күн бұрын
Nope, still mine. ^^
@botodin697916 күн бұрын
LCTs are disappointing. Get a GHK V2 second hand instead
@2lbsTrigrPull16 күн бұрын
I'm happy with my E&L AKM and AK-74MN. I don't buy GBBs. What I've seen about the GHK AKM V3 is enough not to buy any GHK AKs...
@botodin697916 күн бұрын
@@2lbsTrigrPull E&L! Hеll yeah, E&Ls are so beautiful
@user-si8ck9io3x17 күн бұрын
❤good man
@2lbsTrigrPull17 күн бұрын
🤙
@KangMidi18 күн бұрын
Cek harga..mister😁👍
@LuigiBonetti18 күн бұрын
Please could You tell me where I can find and original russian AKM wood set? I've found only polish ones in many online shops...
@2lbsTrigrPull18 күн бұрын
Only I could find is russ-guns-de.net but it's a German shop and more than expensive... lol
@LuigiBonetti18 күн бұрын
@@2lbsTrigrPull Thank you very much!
@2lbsTrigrPull18 күн бұрын
@@LuigiBonetti 👍
@Front-Toward-Enemy20 күн бұрын
The real AKM has a gap between the stock and receiver. If there wasn’t a gap between the stock and receiver, the wood stock would crack and chip.
@AngelSilverFourtySeven23 күн бұрын
👍🏼🥃🇺🇸
@2lbsTrigrPull22 күн бұрын
😁😁🤜🤜
@simone.Lmo.639-223 күн бұрын
clearly a WillScaryForCandy reference XD
@2lbsTrigrPull23 күн бұрын
😁
@ThePapaMike23 күн бұрын
Never been fired and only dropped once?
@2lbsTrigrPull23 күн бұрын
👍
@lgc52525 күн бұрын
hey still there ! man you gotta have the most perfect tula stylled airsoft akm in the world ! everything is perfect now ! just for the bakelite mag if u don't want (or could) use a real one adapted to airsoft u can 3d print some izmash/izveshk or tula marking in order to stick it on for the lengendary perfection !
@2lbsTrigrPull25 күн бұрын
Can't get 30 rounder mags anymore. Illegal... A few years ago I could buy any mag I wanted. Now not possible anymore... 🙄😤 I don't have a 3D printer so no option for me. Though I wouldn't be any difference then at all if you use an airsoft mag or a 3D printed one... 😜
@thai-online26 күн бұрын
Nice thing👍👍
@2lbsTrigrPull25 күн бұрын
🙃🤙
@aandersson65026 күн бұрын
been watching several of your guides as well as vhs_airsoft, realfakeguns tutorials and they help alot! One thing I'm unsure of as I'm completely new to modding externals is how you clean off the chemicals afterwards because surely you don't rinse it with water after you applied anti-rust? Do you wipe it off with alcohol? I think I'll keep to coca cola and salt though :^) But I didn't think of using anti rust from the beginning. Since real AKM furniture (Wooden handguard, buttstock) are 200€ from what I know off, and the E&L essentail line wood is quite soft, I'm wondering if its possible to get a similar look by sanding down the wood and refinishing it with wood varnish. Have you done it? If so did you use a water based one?
@2lbsTrigrPull25 күн бұрын
As you can see in the video a rinse with hot water is enough for Evapo-Rust. I made a video about airsoft wood finish and imitating the Russian look. I used Shellac nnd redbrown wood dye.
@aandersson65025 күн бұрын
@@2lbsTrigrPull I’ll look into that video. Cool projects man! One fun idea would be to grab some cheaper specna arms/CYMA AK with worse painted externals and seeing how realistic you can get it. Since you’re replacing sight posts, wood etc already with real parts it might be more economical since E&Ls are already supposed to be one of the better airsoft ak’s externals wise. Specnas already come with better internals, if you do play airsoft 😁 I know you dabble more in airguns. Be sure to look up polish sites like taiwangun or gunfire, but you might already know that 😃
@2lbsTrigrPull25 күн бұрын
@@aandersson650 Yeah that would be better if you are more budget minded. I wanted a good base from the start. 😁 My E&L AKM came already with better internals so no need to swap anything out fom the gearbox, Hop Up Unit or inner barrel. 😄
@racl195428 күн бұрын
Not impressed with the sound of that HW50. The Walther Century and LGU sounded very civilised in comparison.
@ybrik593729 күн бұрын
how to remove the gas tube retaining spring on the upper wooden handguard?
@2lbsTrigrPull29 күн бұрын
There's no spring on AKM models. Only AK-74. But I guess it's done by a "bending and twisting" motion.
@ybrik593728 күн бұрын
@@2lbsTrigrPull My E&L AKM essential top wood handguard has this. Just wondering what is the proper way to remove this, if I would just need to pry it out, I might score/scratch the wood.
I have a few questions since I recently stripped the finish off my ak and I just cerakoted it and I'm not liking it. Did you plug the barrel with a wooden dowel or rubber plug And should I worry about the threads and trunion being parkerized because my rifle is still fully assembled from the factory
@2lbsTrigrPull29 күн бұрын
This was an airsoft AKM with a fake barrel. If you look closely, you can see two holes in the barrel right in front of the rear sight block. No need to plug it. For real firearms you need to plug the barrel! Otherwise you screw it up. In case of threads you will find different opinions. Some say it's not good to parkerize the threads and some say it won't harm it. I'm leaning towards you can't harm the threads with the park job. Maybe pay attention when sandblasting. I would rather not sandblast the threads. It's not that they won't work anymore but they will get "crunchy". Real Russian AKs are just dipped and not taken huge care of in this process. You will find spots not even painted like under the lower handguard retainer on the barrel and on the muzzle threads too. I wouldn't worry to much and just go at it. lol 😄
@wesbodine6102Ай бұрын
You don't have to take the barrel off to remove the piston do you???
@2lbsTrigrPull29 күн бұрын
Yes. But I have always disassembled them completely. 😄
@wesbodine610229 күн бұрын
@@2lbsTrigrPull Thank you for responding so quickly, I have a Vortek PG4 HO kit that's supposed to arrive today and it's my first time installing one as well as the first time disassembling a Beeman R9/HW95. Do you think I'll be able to reassemble the rifle without a spring compressor?
@2lbsTrigrPull29 күн бұрын
@@wesbodine6102 I don't know that Vortek kit and how long that spring from that Vortek kit is. All I know is that the cylinder of the HW95 is pretty long and can accomodate longer springs without the need of a spring compressor. Compared to the HW80 which has a pretty short cylinder and bigger springs in spring diameter and bigger diameter overall I would say you don't need one with a bit elbow grease. When installing high powered springs in the HW80 you definitely would need one. With the R9/HW95 I don't think so. Report back when you have the kit. I'm curious how the installation goes for you. cheers
@wesbodine610229 күн бұрын
@@2lbsTrigrPull Installed the kit this afternoon, my rifle is getting almost 17 ft lbs with the 16.36 H&N Terminators 681 fps and 16.85 ft lbs I couldn't be happier👍👍
@2lbsTrigrPull28 күн бұрын
@@wesbodine6102 No spring compressor needed? ^^
@drakeblackkАй бұрын
Can i ask about the upgrades you have? I see you have better stuff inside, my gearbox has a fully plastic tube, so the gears cant move it anymore, so its totally ruined, any recommendations? Doesnt matter if its more than 400 FPS as i only used my AKS74N for shooting at objects :)
@2lbsTrigrPullАй бұрын
I guess with tube you mean the piston? I would go for a Retro Arms piston with steel teeth. Standard E&L steel gears are okay but you can also upgrade to the more premium E&L steel gears. Piston head I would get a FPS Advanced Alu Piston Head with two seals. I think they are made in Italy. Cylinder and cylinder head also from FPS. Standard E&L nozzle is okay but can also be upgraded. ^^ I can't even tell you where the stuff in my AKM comes from because they were already pre installed from the shop I bought it from. There's a lightweight piston in it. I think with 15 teeth. Standard E&L gears, steel cylinder and I think Begadi Piston head with standard E&L nozzle. Mosfet from Begadi was also pre installed. My Hop Up unit is also from Begadi called Nebu Pro. Bucking and and Hop Up are also from Begadi with TNT Air Cushion S+ barrel. The rubber bushing on the spring guide get's this one to around 1,8-1,9 Joule.
@drakeblackkАй бұрын
@@2lbsTrigrPull Thats awesome, cool thing you got there :) This is the first time ever i disassembled my gearbox, gladly i was able to put it back together. Only problem is, that i can order from like gunfire etc, but the shipping is literally got a higher price than the item itself! :D Original gears seems pretty cool to me honestly, i dont really want to fully upgrade it, as im not active on games, but would be awesome, but the prices.... I will take a look at that hop unit, as i really liked it in the video, if i see that correctly, you can change the hop with a "knob", its way better than screwing that plastic thing. I waste your time with this last important question, as noone really gave me an anwser, so, if i buy ANY pistons with 15 teeth like the original, all of them will fit, all the gearboxes having the same dimensions, or i need to look out for something else? Thanks very much for your anwser and time, your AK looks awesome! :)
@2lbsTrigrPullАй бұрын
@@drakeblackk Yeah on the Nebu Hop Up Unit you can turn a knob to decrease or increase Hop. The gearboxes should all have the same cylinder, piston, piston head and cylinder head dimensions. For cylinder it's 23,8mm inner diamter and 25.5mm outer diameter. If you buy something for your E&L it should fit.
@drakeblackkАй бұрын
@@2lbsTrigrPull Thank you! I just buy any good quality with 15 teeth andi should be good :P Its worth to upgrade the hop unit? Im thinking about getting a more powerful motor, that shoud increase the power. It wil be okay to go over 400fps as i used it for shooting at cans etc Thanks again for your anwser:)
@seandowns4298Ай бұрын
Wow way too much moly🤦♂️
@2lbsTrigrPullАй бұрын
Worked perfectly! You can use less, no problem. 😄
@ahmadjuang3733Ай бұрын
Gimana cara belinya ini
@aandersson650Ай бұрын
najs mann. But how come you didnt fake bakelite on your grip? Some wood varnish and glossy clearcoat should solve that. Then fix the obvious black magazines. cool build
@2lbsTrigrPullАй бұрын
Installed the LCT Bakelite slim grip with motor anyway. ^^
@aandersson650Ай бұрын
@@2lbsTrigrPull Cool man, I've seen the slim motor but man is it expensive when you can buy some 30tpa motor or even a cheap brushless for the same price
@truongtuan-ud7deАй бұрын
Có akms báng gập k bạn
@2lbsTrigrPullАй бұрын
Unfortunately not. ^^
@ahmaddharma7864Ай бұрын
Bang ini pistol manik bisa gak sih kirim ke malaysia soalnya aku mau buat nembak monyet
@MuhammadUmar-fp7jlАй бұрын
RS ..
@flocking_subiАй бұрын
can you please do a give away with a glock blank gun plsssssssss
@2lbsTrigrPullАй бұрын
maybe 😁😅
@flocking_subiАй бұрын
@@2lbsTrigrPull pllssssssss ive wanted one for so long but i just dont have money plssssssssssssssssssssssssssssss
@lgc525Ай бұрын
Correct me if i'm wrong but i could use the lct slim grip without changing the motor right ?(i just gotta ajust or deal with a little play) still love ur vids !
@2lbsTrigrPullАй бұрын
Slim grip only goes with the slim motor. ^^
@lgc525Ай бұрын
@@2lbsTrigrPull okay understood now 😅
@mulkanrao867Ай бұрын
How will to buying
@bsoul555Ай бұрын
I saw the price and then saw the video was 10 years old, you could actually sell them for a profit now haha
@2lbsTrigrPullАй бұрын
probably. 😁😂
@jesusmendax6815Ай бұрын
Awesome! Looks very good! Nice job
@2lbsTrigrPullАй бұрын
Thanks! 😄🤜
@ER3N.J4EGERАй бұрын
Wann macht bfgguns ein comeback?
@2lbsTrigrPullАй бұрын
Bin doch hier. ^^
@ER3N.J4EGERАй бұрын
@@2lbsTrigrPull Vermisse deine Belastungstest- und Reinigungsvideos. Gibt es denn keine Möglichkeit, diese zu re-uploaden? Oder hast du sie bewusst entfernt?
@2lbsTrigrPullАй бұрын
@@ER3N.J4EGER Auf yamahafreak sind sie doch? ^^
@MinangrealАй бұрын
Angin ny tahan brapa kali shoot y😊
@RezaGz-xt6ocАй бұрын
Hh fps nya cuma 98 hh
@ManuelZerna-pj7yoАй бұрын
Hiw much sir
@alkahapiz9901Ай бұрын
Telat 10 tahun
@yong91522 ай бұрын
Susah amat mau nembak.. tgguin yg otomatis lah..
@cahyonugrohonugroho48322 ай бұрын
Jarak meter bos
@2lbsTrigrPull2 ай бұрын
30m and shorter distance is 10m. ^^
@Dianaviza2 ай бұрын
brpa hrganya
@jackspring77092 ай бұрын
Nice. Is that from the 'Platinum' or 'Essential range of E&L AKM? It looks like an 'Essential' but its hard to tell.
@2lbsTrigrPull2 ай бұрын
Essential. ^^
@jackspring77092 ай бұрын
@@2lbsTrigrPull Thanks a lot. I was considering buying an 'Essential'. That confirms it. All the best.
@2lbsTrigrPull2 ай бұрын
@@jackspring7709 Doesn't really matter if Essential or not. I think only a few internals are different to the Premium version but upgraded parts for the gearbox are dirt cheap anyway. 😄
@jackspring77092 ай бұрын
@@2lbsTrigrPull I agree: I was thinking along those lines, too, and was wondering how upgradeable it is. Thanks for confirming. I've just put a deposit down on one and will collect it when I get back to England. The wood grain finish on your particular model looks great, if mine has the same grain and finish I'll be very happy. Have a great weekend.
@2lbsTrigrPull2 ай бұрын
@@jackspring7709 I swapped out the wood for original Russian handguard set and the buttstock was changed by me too. Some of those E&Ls have kinda weird wood that looks more like MDF (was the case with mine) but the E&L stock I bought extra was nice wood laminate that looked exactly like the real one. I have already made several videos bout upgrading the E&L and how to do the original russian wood shellac finish. This spring/summer I will do another modding video which is something no one did before, at least not to my knowledge. 😁 Nice weekend to you too!
@adiantadiant2 ай бұрын
Order dong berapa harganya
@whiskeykilmer18662 ай бұрын
Excellent, I thank you. Just found your channel and I am going to watch all your videos eventually.