Can I use a digital d3 display on the none digital the one with the 3 red lights
@maximiliankarl11014 ай бұрын
Was ein Scheißhaufen. Da muss man sich ja schämen.
@MahinMir-ov3jv8 ай бұрын
How you install the display can you share with us
@j-vlog002 Жыл бұрын
wow.. I learned absolutely nothing from this vid
@devincossairt5673 Жыл бұрын
Anybody ever have a 06 info code?
@kingcorona89 Жыл бұрын
What does p4=0 and C4=0 do?, I'd like the throttle power to refect the pedal assist on display.. How do?
@richardkeith9490 Жыл бұрын
Where can I buy please
@rayjoanmyers10222 жыл бұрын
Display on my KT5 will not stay on after it is activated. Is there a way to prevent this?
@freedomofmotion2 жыл бұрын
How hard is it to do the cable routing on this bike? And is the change worth it? I don't need more speed as it's for my son, but I would like the peddle assist to at-least match the throttle speed as I feel the peddle assist is safer for him than the throttle.
@halibramfeiz35162 жыл бұрын
Ich habe dieses Display gekauft, es funktioniert, wenn ich es anschließe, es liest die Batterie nicht und der Motor funktioniert nicht was kann ich tun?
@user-vm4uy4zl2t2 жыл бұрын
😀🖐️ нормуль
@albaescriche63182 жыл бұрын
Powerful
@postalinVT2 жыл бұрын
Yea, not a useful video. Just bought a used bike with display and no manual. Would be nice if you thought about us fools with NO knowledge of what you are doing. Thanks anyway.
@Sino19852 жыл бұрын
Read the f. manuel, if you can 😉
@postalinVT2 жыл бұрын
@@Sino1985 My reading skills are pretty good but, apparently, yours are not. Read where it says I didn't get a manual with it. Again, thanks anyway.
@Sino19852 жыл бұрын
@@postalinVT You can find it in the internet 😂
@3dtutorialsandquestions3 жыл бұрын
I have error. Not work up button
@tigor663 жыл бұрын
Nice carpet!
@silversilver23 жыл бұрын
They are breaking so fast, i made 8 tires totaal with my first one, and exactly 8 with my second one. It just broke, so quality is shit. Don't trow away your bill, you will need it for the warrenty!
@jrigana44253 жыл бұрын
How to replace lcd of fiido d2s?
@did3d5234 жыл бұрын
have you speed limitted?
@Sino19853 жыл бұрын
No, max speed is not more than 25mph
@vincentverheyen55104 жыл бұрын
hi can i ask you a few questions about the display here ? i ordered a new one because the last one was broken due to heavy rain. i plugged the new one in, then it suddenly blew up and started to burn. what may have caused this ? thanks
@Sino19854 жыл бұрын
Hi, sounds like the Controller got a short caused if the rain/water. I would measure the output of the Controller to the Display and compare with the datasheet.
@nicolaisurm70784 жыл бұрын
Great video and nice mods! Mod you are still able to accelerate without pedalling?! That's not legal afaik.
@Sino19854 жыл бұрын
No, I didn't install the throttle
@fabianalejandro4324 жыл бұрын
Hi.. are you using this lcd with the original fiido controller or did you upgrade the controller too?
@motechsanpedro3919 Жыл бұрын
KT Display only works with a KT Controller, might change your throttle too.
@ubershredder19894 жыл бұрын
Hello, I ordered a d1, but it has a different controller (LED not LCD). Is there still a way to speed hack it? Please looking forward to ur response , thnks
@Sino19854 жыл бұрын
I have no idea to speed hack the original controller. But I dont think that you can get more speed with the original controller.
@lvxdvx4 жыл бұрын
hi, are you using this lcd with the original fiido controller? or did you upgrade the controller too? thanks
@fabianalejandro4324 жыл бұрын
Good question! I also would like to know it... :-)
@gibbson1303 жыл бұрын
That's a KT LCD and the stock controller isn't KT compatible. So the answer is no, it's not the original controller.
@stewilliams36264 жыл бұрын
Have you also changed the tyres ?
@Sino19854 жыл бұрын
Yes, I did. Schwalbe 16 x 1.75
@stewilliams36264 жыл бұрын
@@Sino1985 thought so......i ordered a d2s yesterday......thinkin of new tyres and maybe a few other bits
@alpioozen4 жыл бұрын
@@Sino1985 I ordered Schwalbe 16 x 1.35 Marathon Plus thought it will save me from punctures, unfortunately it didn't fit, not even close. imgur.com/a/nfMsgLX
@Sino19854 жыл бұрын
@@alpioozen slm, the wheel look like 14 inch from a Fiido D1. I have an D2 which has 16 inch. What is written on the original tire, which sizes?
@alpioozen4 жыл бұрын
Sino1985 I also have fiido d2s and wheel in the image is 16inch wheel, no clue about the dimension of the rim but on the tyre it says 16"x1.95. Last night ordered schwalbe road cruiser 16x1.75 I am hoping that one fits.
@Hamachingo4 жыл бұрын
Just unpacked mine. The air shock in the back appears to be fake, there's a nozzle for air but it's just a dummy, I assume it's just a spring inside.. Is there any way to adjust it? I'm way too light and I have to jump for the shock to compress even just a little bit. :-(
@Sino19854 жыл бұрын
Yes there is a spring inside. I don't know how to adjust the spring. Maybe the group "Fiido d1 d2 d3.." on Facebook can helb you
@Arabiscuits14 жыл бұрын
Hi how do I get the LCD5 to give me full throttle speed from zero? without pedalling?
@Sino19854 жыл бұрын
Hi, P4 should be 0 according to the User manuel. Typ in Google “kt-lcd5 settings", opden the pdf and recheck it.
@davidirwin72534 жыл бұрын
Sino1985 did you know you can set cruise control on this meter? I believe it’s in C1. Press and hold down arrow when Bikes speed is up to 7 km you should then get a cruise control symbol?
@Hamachingo4 жыл бұрын
Can't I just cut the throttle wires and just install new grips? That would give me the 3 fixed pedal assist modes, right? Does the new controller have gradual speeds so you can just pedal at whatever speed and it adjusts? Kann man nicht einfach die Gashebel-Kabel durchtrennen und neue Griffe installieren? Dann würde man doch Pedelec-Modus mit den 3 festen Geschwindigkeiten haben oder? Hilft der neue Controller bei jedem Tempo, also kann man in irgendeiner Geschwindigkeit treten und er hilft mit?
@Sino19854 жыл бұрын
Wird nicht klappen da das Display mit dem Gasgriff eine Einheit ergibt. Sprich Batterie anzeige fällt weg, Spannungsversorgung (über den Schlüssel) fällt weg dadurch kannst du gar nicht mehr fahren. Vielleicht könntest du es über den Mode Schalter lösen. Du müsstest die Stellung wo du mit dem Gasgriff Mode fährst abknipsen, ist aber keine Garantie, dass es funktioniert. Das würde dir aber auch nichts bringen da du im assist mode langsamer fährst als im gasmode. Deshalb die Empfehlung den Kontroller, Display und PAS auszutauschen. Der PAS hat 12 Magnete, präziser und schaltet gleich ein bei jeder Geschwindigkeit ein.
@Hamachingo4 жыл бұрын
@@Sino1985 Vielen vielen Dank für die Info, hab das Fiido noch nicht bestellt und bereits alle Info im Web dazu gelesen/geguckt, an manche Details kommt man eben nicht ran. Den Mode-Schalter umzubauen ist natürlich eine Idee, dachte der Assist-Mode wäre 3-stufig (10, 15, 25 km/h). Mit Display und PAS hätte ich dann also Pedal-Assist bei jedem Tempo bis 25, also keine festen Stufen? Der Motor passt sich dann der Pedal-Drehzahl an? Wollte mir ja eigentlich das D2s (mit der 6-Gang Schaltung) besorgen, da bräuchte ich dann wohl 6 Fahrmodi, so dass die Motor-"Übersetzung" zur mechanischen Übersetzung passt. Andererseits, im leichten 1. Gang treten und der Motor gibt Vollgas wär auch was. Gibt es irgendwo online das Handbuch zu der Display-Einheit? Damit ich sehen kann, ob mein Plan aufgeht?
@Sino19854 жыл бұрын
@@Hamachingo Wenn ich du wäre würde ich ein bisschen warten bis der fiido d11 auf den Markt kommt der sieht optisch besser aus. Der hat auch 20 Zoll Reifen und nicht 16 wie beim D2. Das sieht auch ein bisschen besser aus und nicht wie ein Clown auf einen kleinen fahrrad (bei 1,83m Körpergröße). Vielleicht hat der D11 auch einen separaten Gashebel den du einfach demontieren kannst.Zu den Gängen, die Gänge haben nichts mit dem assist Mode zu tun du könntest auch ohne Kette bzw. Gänge fahren bei dem heckmotor. Der PAS Sensor erkennt die Bewegung von der Kurbel und schickt sie an den Controller und der Controller sagt Gas geben je nach eingestellter Stufe. Bei dem Controller den ich habe kannst du die Leistungsstufen einstellen. Es gibt 1 bis 5. 5 ist bis 25 kmh 1 ist glaube ich bis 14 km/h an motorunterstützung. Danach schaltet die Motorunterstützung ab. Ich lasse es immer voreingestellt bei 5. Wenn ich über Schotter in den Kurven starten würde oder bei Nässe dann geh ich mit den Stufen runter da der Motor bei Stufe 5 zu stark beschleunigt.
@Hamachingo4 жыл бұрын
@@Sino1985 ah, alles klar, keine Fragen mehr offen, vielen Dank. Hab zum D11 beim Suchen nix gefunden, fand 16" eigentlich einen guten Kompromiss. Für 20" hätte ich mit dem Ancheer 20" Klapprad geliebäugelt (scheint von Haus aus schon STVO-konform zu sein), Federung soll beim Fiido aber besser sein und mir gefällt die Optik, Kompaktheit (will 2 davon im Kofferraum oder hinter den Vordersitzen) und der Preis beim Fiido einfach besser.
@kingskawn4 жыл бұрын
Is that a D2 or a D2S because the D2 doesn't have the rear suspension I think
@Sino19854 жыл бұрын
No thata a D2, a D2S has a Shimano gears. The D1 has no rear suspension
@franjojunakovic33404 жыл бұрын
Pozdrav,sada mi je sve jasno i još jednom hvala za trud i informacije!
@franjojunakovic33404 жыл бұрын
Pozdrav,na el. biciklu sve radi(svijetlo i trubu nisam spojio),ali ne znam koju žicu moram spojiti sa bijelom da bi pokazivalo brzinu!? Možda postoji video ili shema za to! Izvini još jedanput na smetnji...
@franjojunakovic33404 жыл бұрын
Hvala za brzi odgovor,displej ne pokazuje brzinu,stalno stoji na 00km. Ono tanko ožičenje odnosi se na 5 žica koje idu iz konrolera na displej? Pozdrav....
@Sino19854 жыл бұрын
Ne, 6-pinski kabeli od motora do kontrolera crveno bijeli, crni plavi, zeleni žuti. Bijeli kabel nije spojen jer u motoru nije ugrađen senzor brzine, pa ga morate usmjeravati izvana. Radi li sve ostalo, možeš li voziti?
@franjojunakovic33404 жыл бұрын
@@Sino1985 Pozdrav,na el. biciklu sve radi,osim trube i svijetla,može se voziti i to nešto brže,ali me zanima koju žicu bi trebalo spojiti sa bijelom da dobijem senzor brzine? Možda postoji video ili shema za to!? Izvini još jednom na smetnji....
@Sino19854 жыл бұрын
m.banggood.com/External-Speed-Sensor-Hall-For-Controller-Of-Electric-Bike-Scooter-Mtb-Pedal-Scooter-Conversion-Part-p-1152394.html?rmmds=myorder&cur_warehouse=CN Ako imate senzor brzine, priključite crveni kabel na 5 volti, crni kabel na masu, a zeleni na bijeli na ulaz regulatora.
@franjojunakovic33404 жыл бұрын
Pozdrav,video je sjajan i poveo sam se njime i kupio pas sensor kt-v12l i controller kt-lcd 36v,ali moj Fido d 2s ne pokazuje brzinu! Displej je kt-lcd3! Upucao sam sve parametre i mislim da motor brže vrti,ali kilometar sat ne radi!? Pišem iz Hrvatske,a slabiji sam s engleskim jezikom,pa molim za odgovor! Hvala!!!
@Sino19854 жыл бұрын
Pozdrav, ne mogu govoriti hrvatski, ali pokušavam s prevoditeljem. Zar brzina uopće nije prikazana? Ako se brzina prikazuje samo za vrijeme rada motora, potreban vam je vanjski senzor brzine. Ako se uopće ne prikazuje, onda nešto nije u redu s ožičenjem na motoru. Morate zamijeniti tanke crte i isprobati ih
@clevercampingkastenwagen24794 жыл бұрын
Hallo Sino1985 Wir haben uns zwei FIIDO D2S gekauft. Nun hätten wir gerne einen anderen Controller, der im ON Modus gleich beim Antretten Motorunterstützung hat und nicht erst nach 2 Sekunden und am besten konstant etc (Eben so wie bei den Normalen E-Bikes) und ein Display wäre auch nicht schlecht. Weißt du ob es da etwas gibt! Plug and Play Anschluss für Dummies oder wer mir Helfen kann ? THX
@Sino19854 жыл бұрын
Hi, ich wüsste nicht, dass es da eine plug and play Lösung gibt. Der Controller, den ich bei den anderen Videos in der Beschreibung aufgelistet habe funktioniert gleich beim ersten treten (der PAS sensor hat 12 Magnete) es gibt auch welche die haben weniger Magnete deshalb dauert es länger bis der Motor anspringt. Du kommst nicht drum rum zu Löten oder die stecker umzubauen auf den neuen Kontroller. Du kannst auch die Leitungen abschneiden und einfach zusammen löten und mit einem Schrumpfschlauch oder isolierband abisolieren. Ich würde dabei die Verbindung einzeln trennen und einzeln verbinden quasi Schritt für Schritt jede Leitung löten.
@jammiecruz75964 жыл бұрын
*If you are like me•••>**share4.photo/FIIDOeBiki?46t** who loves to take the bike on road trips or simply doesn't have room to store a full sized bike, get this one. You won't find anything better at this price. And, the seat cushion is soft so it's good for a long ride.*
@jkindler19734 жыл бұрын
*This is an absolutely amazing electric bicycle.•••>**share4.photo/FIIDOeBiki?30d** My friend and I have been looking for folding ebikes for quite some time. After some extensie research, we found this highly rated bike at an umbelievably affodrdable price.*
@redmiata72804 жыл бұрын
Hallo Sino, Lob und Respekt für den Umbau und vielen Dank, dass du deine Erfahrung hier mit uns teilst! <3 Ich habe deinen Umbau nachgebaut. Also alle Teile wie du sie verwendest hast und deine Einstellungen 1 zu 1 aus diesem Video (nur das Speedlimit hab ich exakt auf 25kmh gestellt). Habe gerade eine 10km Probefahrt gemacht. Motor setzt innerhalb einer viertel Kurbelumdrehung ein, Ansprechverhalten ist super, viel besser als vorher! Mein Fiido schafft auf gerade Strecke ohne viel Wind nur hohe 21 kmh, niedrige 22 kmh. Bergab zeit dann der Tacho 25 kmh, dafür muss ich aber auch noch ordentlich mittreten. Da hatte ich mir mehr vorgestellt. Also dass der Motor schon bis 25 kmh durchzieht. (Ich bringe etwa 85kg auf die Waage.) Ist das bei dir auch so? Kann ich irgendwas tun? Ideen? Danke!!! <3
@Sino19854 жыл бұрын
Das einzige was mir einfällt ist, dass ich weniger wiege (70kg). Aber wenn die Batterie halb leer ist, komme ich auch nicht auf mehr als 21km/h. Ich bin am überlegen ob ich auf 48v umsteige, sprich anderen Controller und Batterie umbauen. Das sollte es keine Probleme mit der Geschwindigkeit geben. Hoffe der Motor hält das aus.
@BigKingOG4 жыл бұрын
Hallo, habe auch ein Fiido, kann ich nur das Display tauschen ? Kann jemand bitte helfen ?
@Sino19854 жыл бұрын
Geht nicht. Du brauchst auch den dazugehörigen Controller.
@BigKingOG4 жыл бұрын
Sino1985 danke
@01230hasni012304 жыл бұрын
hallo Sino, hab das gleiche vor aber mit dem Fiido D2S, kannst du eigentlich was zum speed sagen, geht da eine höhere geschwindigkeit (ja ich weiss illegal) als mit dem original controller? danke für die antwort im vorraus
@Sino19854 жыл бұрын
Nein leider nicht. Bei einer Facebook Gruppe gibt es einen Italiener der einen anderen Kontroller genommen (350W illegal) hat mit Daumengas (auch illegal) am Display. Mit dem soll er angeblich über 32km/h kommen. Ich spiele aber mit dem Gedanken meinen Kontroller gegen einem mit 48V zu tauschen und auch die Batteriespannung zu erhöhen. Mich nervt es, dass wenn die Batterie leer ist das Rad nicht über 22kmh kommt.
@besafe59694 жыл бұрын
t
@shagstars4 жыл бұрын
I am in a dilema, I don't know which one to choose... the D1 with 10 AH battery or the D2 with bigger tires but with 7.8AH battery.
@davidrossmiller83494 жыл бұрын
Great video...my self and one of my admins try to help out people on Facebook..feal free to join us. Zi you ji guang,DYU, Fiido ebike help. Your vide is awesome. I just did a bunch of upgrades ion my T18.
@hans-hermannspiess99035 жыл бұрын
How to disable the throttle and the so called moped mode of a brand new Fiido D2 for test rides on the road? When having received your Fiido D2, I'm sure you instantly want to test it on the road. Not to run into trouble with police, just do the following first: Open the housing of the multi-switch (light, horn and 3-step switch) on the left side of the handle. When having done, look at the 3-step switch wiring. In front of you is a brown cable, a green one in the middle followed by a red cable. Now de-sold the green cable and sold it onto the red one (green and red cable share now the same contact, while the middle contact stays free). Now close the housing again. Disregarding the position of the 3-step switch you are selecting, you are in pedal-assist mode and the throttle will be always disabled. You need about 15 minutes to do this. That's it for bike testing. But please take into your account, that you have with this provisional solution only one electrically gear being not the fastest (!) and you don't have the 25 km/h limitation of motor assistance. (But quite frankly, who the hell can ride for a long distance in the plains with fare more than 25 km/h on this tiny bike not pedaling like a hamster in the wheel.) But whatsoever law is law in Germany and therefore please do the necessary modifications a.s.a.p. when having received all components. Thank you for your attention and enjoy the ride.
@bajo765 жыл бұрын
@Sino1985 Der Motor ist doch der Xiongda Ytw06 oder? Laut Anleitung von meinem KT LCD7 Display müsste Mann bei P1 folgendes einsetzen. Gear reduction ratio x Anzahl der Magnete. Gear reduction ratio wäre bei unter 20 zoll rädern 8.5 und Magnete sind 20 verbaut also wäre 168 richtig für p1?
@Sino19854 жыл бұрын
Falsch, die Zähne der Getriebe spielt dabei eine Rolle. Großes Zahnrad hat 93 Zähne, kleines hat 21, 20 Magnete sind verbaut. Die Berechnung ist oben in der Beschreibung.
@Sino19854 жыл бұрын
Woher hast du Info das das der Motor ist? Ich habe keine Informationen gefunden. Wäre gut zu wissen wieviel rpm der motor hat bzw. Datenblatt. Hast du einen Link?
@bajo765 жыл бұрын
Great video. How did you get the number 89 for P1? And what's the number for c10?
@Sino19854 жыл бұрын
I have opened the motor and checked the magnets and the teeth of the gears. Calculation is in the description. c10 = n for no
@davidirwin72534 жыл бұрын
deveric why can’t you explain what you are doing? All I see is you pushing buttons have no clue what you were doing I’m sorry but these videos with no narration don’t really cut it perhaps you could do it over with narration?
@Sino19854 жыл бұрын
@@davidirwin7253 The setting are in the user manual of the controller, why don't you read the user manual?
@scrubekah3 жыл бұрын
@@Sino1985 I am referencing the manual for the display. Is this different?
@miasstube5 жыл бұрын
Hi. Why are you using C2=1? I have Fiido D2 and KT36V250WLCD5. My settings are the same except C2, and it doesn't work. It can rotate wheel in walk-assist mode, but fails after ~1s in PAS mode. Could you write a resource when we can communicate?
@miasstube5 жыл бұрын
Here is slo-mo of the failure: kzbin.info/www/bejne/g5DHqZd4gbasmcU
@Sino19854 жыл бұрын
Which PAS Sensor did you have? I have bought the V12L, it has 12 magnets and it's working. Maybe you have to check the wiring of the PAS. I didn't remember why i choose 1 maybe 0 was not working.
@carmeloxx59325 жыл бұрын
Grande Grazie
@Iamnothere4895 жыл бұрын
Pay come for assemble or not assemble?
@carmeloxx59325 жыл бұрын
Hello beautiful good job I wanted to ask you kindly if you can make me a video with the parameters you have in the display because I don't like it to you I have a d2s thanks
@Sino19855 жыл бұрын
There you go kzbin.info/www/bejne/e3XEeneBm515fqs
@doncroixc5 жыл бұрын
Moin moin, kannst du ein Bild der Verkabelung zu Verfügung stellen? habe die gleichen parts gekauft und da ja jegliche kabelbeschriftung fehlt, wäre das super :D
@Sino19855 жыл бұрын
Hi, ich habe das auch nur mit Hilfe vom Schaltplan gemacht, du kannst dich nicht auf die Farben von den Kabeln verlassen da die Chinesen alles wild durcheinander machen. Ich kann dir nur empfehlen das Schritt für Schritt zu machen. Fang am besten mit dem Motorphasen an (Die Farben sollten passen, gelb grün blau) danach einfach den Hallsensor Stecker vom Motor kommend mit dem Controller anschließen. Danach die Bremsschalter und den PAS Sensor. Du musst bei den PAS und Bremschalter die Steckverbindungen abknipsen und verlöten oder du bestellst dir die passenden Stecker bei Aliexpress.
@doncroixc5 жыл бұрын
@@Sino1985 Vielen dank für die Tips schonmal, habe dieses WE festgestellt, dass auch die stromversorgung bei mir verschiedene stecker hat ^^ XT-60 für die, die noch umbauen wollen
@namele2s5 жыл бұрын
Hi there :) did you maybe think about or try to add extra battery to D2? Wonder how and where to plug it. Theres big (300 people) group on facebook - Fiido D1 D2 D3 discussion group. Join us :)