Hola, yo quisiera realizar lo contrario... Para poder cancelar las extensiones y pueda avanzar por medio de una USB... Alguna idea??
@Ruelvlog0529Ай бұрын
also connected❤❤
@Ruelvlog0529Ай бұрын
done tamsak from jalyn❤❤❤
@blowfish3Ай бұрын
I feel sick.
@654comet3 ай бұрын
This looks really good for beginners to practice , I have wood stick of devdar wood I will try it with that , i also have 2212,1000,1400,2200 kv motors , 9g servos ,30a esc i think i need to go for 600mah 2or 3s battery and prop,I also have 5mm depron sheet , i didnt understood the wing profile
@RelaxiPlay9 ай бұрын
I printed it, but the motor hub spins inside the spiral. What is supposed to create friction between the hub and the spiral? Thanks.
@gabornagy388811 ай бұрын
It’s ridiculous that in one of the richest countries of the Earth there is no highway from the capital to the second biggest city. Imagine this in Germany or Austria.
@markuserikssen18 күн бұрын
It's very sparsely populated and most Norwegians take planes because it's much faster and relatively affordable. The weather conditions in the mountains can also be harsh and unpredictable, especially in the winter.
@gabornagy388816 күн бұрын
@@markuserikssen Ja, det er sant, men tenk på det da Sveits eller Østerrike på alpene 🤷♂️ Der er fin motorveier også. Hadde vært fantastisk minst en to-felt vei hver retning fra Oslo til Bergen.
@markuserikssen16 күн бұрын
@@gabornagy3888 I think the difference with Switzerland and Austria is that these countries are smaller and have a higher population with more bigger cities in between. Besides that, these countries are surrounded by countries with big populations, so the routes are used to connect other parts of Europe. They are also much more touristy. Bergen is basically a dead end in a sparsely populated region, even though the city region still has a decent population. I do agree that a highway would be much better between Oslo and Bergen, but I can understand why it didn't happen. (I'm not Norwegian or Scandinavian but can understand what you're saying)
@billymoretti843711 ай бұрын
Just what I was looking for (beginner here) Thanks!
@Matijab. Жыл бұрын
20 times faster... Dude this is either 4 times faster than actual video or you're driving 2 km/h
@ga1actic_muffin Жыл бұрын
I love this, the way the light glows through them and dimly lights up makes them feel like mushrooms! So cool!
@CinnabonLeafeon Жыл бұрын
Hi can we get a full tutorial on how to build these?
@scottpardee6303 Жыл бұрын
Yes, I too would prefer a four hour screening of this drive, but the other versions of this trip are all about the drivers and not the scenery, so this is better for my imagination.
@enochfuryan90942 жыл бұрын
The link is dead. Can you please update it?
@nickboston45592 жыл бұрын
I'm curious, what mechanism are you using specifically for detecting ball hits?
@jonathanleslie9100 Жыл бұрын
the copper spring surrounds 6-8 vertical copper uprights. The uprights are all connected to the gpio pin, and the copper spring is connected to the ground. when the ball pushes the spring to touch the uprights the circuit is completed allowing for the input to register in the arduino/single board computer.
@nickboston4559 Жыл бұрын
@@jonathanleslie9100 thanks for the reply!
@jonathanleslie9100 Жыл бұрын
@@nickboston4559 no worries. I'm going to add a solenoid under the bumper as well so I can activate a plunger to squeeze down on the ball and shoot it out of the bumper like a real pop bumper in a pinball machine
@jonathanleslie9100 Жыл бұрын
@@nickboston4559 you actually don't need the SBC for the led or the solenoid, only for the scoring.
@atamico2 жыл бұрын
Excuse my ignorance, but how to fix the motor/extruder in the x-carriage ????
@atamico2 жыл бұрын
Excuse my ignorance, but how to fix the motor/extruder in the x-carriage ????
@ethanferret71312 жыл бұрын
where did you get your control panel???
@Provitrax2 жыл бұрын
Cool 👍👍👍👍, ich nutze auch 3D gedruckte Modele in meinen Kugelbahnen, zum Beispiel auch hier kzbin.info/www/bejne/h6mWl4WPpMh4d68
@dinhtuan7522 жыл бұрын
Thanks for the example
@Provitrax2 жыл бұрын
Cool 👍👍👍👍, ich nutze auch 3D gedruckte Modele in meinen Kugelbahnen, zum Beispiel auch hier kzbin.info/www/bejne/h6mWl4WPpMh4d68
@daleafboi_83152 жыл бұрын
where can i buy this?
@vitale66332 жыл бұрын
This is Awesome! Thank You for sharing your work.
@ShotokuTech2 жыл бұрын
Hi what display panel is that? Thanks.
@joaoalvesdesouza28122 жыл бұрын
Posta o projeto para nos fazer esta Maravilha. Por favor.
@joaoalvesdesouza28122 жыл бұрын
Explica como fazer.por favor.
@popzct2 жыл бұрын
Very nice, great design, congratulations ! Greg
@jineteporcinor.k.30502 жыл бұрын
do it yourself with your 3d printer at home of course who does not have a 3d printer and filaments at home? it's actually easier and cheaper to buy the components
@TinLethax3 жыл бұрын
I watched this video way back when I was 10 years old, today I'm old enough to made one for myself.
@BalltrackMarbleRunGravitrax3 жыл бұрын
Really nice video 👍🙏👍
@spawrofresatore18253 жыл бұрын
Bravo good project
@westfalke773 жыл бұрын
hey there.... can you please tell me what i need to build such a controll panel ?! THX
@Mdrana-mo5xs3 жыл бұрын
Super video
@elidez93233 жыл бұрын
Very cool !
@Krishnantech3 жыл бұрын
I prefer viewing videos at normal speed to enjoy the scenery and read signage along the way. My videos are all at normal speed only, never in fast-forward mode. I have travelled on the same route Rv 7 via Geilo and Hardanger Bridge - a very scenic drive via snowbound plateau and large fjords..
@ewaf883 жыл бұрын
You must have used a lot of petrol driving at this speed
@BlueBlizzard3 жыл бұрын
I left a follow :)
@YONKGSd3 жыл бұрын
I love Norway, you are lucky. ❤️
@MakerMeik3 жыл бұрын
Many thanks for sharing this great model with the community. Initially, however, I assumed that the 5 V power supply would be sufficient. Since that's not the case, I made up a simple circuit by myself and put it into a KZbin video with a short explanation: kzbin.info/www/bejne/eF64pJ13etOtibc I hope you like it ;-)
@emigratednorwegian4113 жыл бұрын
To be quite honest, i do NOT appreciate a video from one end to the other in a FAST FORWARD-modus. I am the one who is interested reading signs along the road. Nearly impossible this for the reason mentioned in this my Comment. Sorry🙁.
@BalltrackMarbleRunGravitrax3 жыл бұрын
Nice Track wow 👍😁👍
@VolFX3 жыл бұрын
how do you feed the motor please
@ethanferret71312 жыл бұрын
You feed the motor electricity. That or human flesh, I’m not familiar with this species.
@fredkoot62783 жыл бұрын
This will be the next project! Is there any description available about the power supply? website of schema?
@mikehardman90983 жыл бұрын
Love this, what do you use to power the solenoid?
@Gravibahn3 жыл бұрын
Nice
@FUKTxProductions3 жыл бұрын
link is dead..
@GraviTraxGarage3 жыл бұрын
Cool layout :)
@rolandeckmeier89613 жыл бұрын
Great Video
@rolandeckmeier89613 жыл бұрын
Hi, can you make one witch is around 20cm high?
@Abderrahmane_Aitouche3 жыл бұрын
Bravo ........👍💌🇩🇿
@SD-ni1km3 жыл бұрын
I think it's fake. It always rain at Bergen :)
@didiersee3 жыл бұрын
Congratulations is possible you show this conception in fusion 360?