KillerOffRoadHobbyz

Пікірлер

@mugshotmarley 4 күн бұрын

Nice work. We didn't have to take off the upper ball joint tho. Just taking off the sway bar mount we were able to fit in the strut with spacer. Prob because it was just was a 2" spacer

@blascruz2276 9 күн бұрын

thank you man ,,,,,ILL HAVE TO DO SAME ,,WAITING FOR THE PARTS !!!!

@drunkchicken8636 18 күн бұрын

So, I'm running stock tires and wheels, 24t pinion on a sensored brushless 13.5 , just installed full front bumper lights and head lights in body. Desperately need a tail light. Runs great on 2s. Only running on street to see how fast it could be, need to set up stronger braking. I did run it on 3s and it's extremely fast, with a lot of body roll. I bought 2 of these in RTR, a red and a gold. And I also have two kit versions not built. I don't know what top speed is, but I will guess 35 to 40. on 3s. Its about as fast as the BBX on 3s. A stock Associated Rival 10 does 40 on 3s out of the box. This is right up there if not faster. Just harder to control. Oh and my esc is the 120a Hobbywing knockoffs that are in expensive. However I'm not bashing them of jumps taller than the truck. If I want to fly, I will go buy a plane.

@marvinesvancese4464 Ай бұрын

Davis Patricia Harris Lisa Gonzalez Brenda

@pep2001bg Ай бұрын

ive inherited this car from my older brother, i loved that man. sick car and ive been fixing it up looking at decent mods, next up is an exhaust its all pretty stock atm

@bobbymuolic8854 Ай бұрын

Wrong place to run these has to be smooth sand no rocks bro....

@Methodical2 2 ай бұрын

Do you use the skid plate with your setup?

@killeroffroadhobbyz 2 ай бұрын

No I didn't

@Methodical2 Ай бұрын

@@killeroffroadhobbyz Do you worry that something may cause some damage under there without the skid plate?

@killeroffroadhobbyz Ай бұрын

@@Methodical2 No

@wallandseller 2 ай бұрын

How did you do your lights on the hood

@killeroffroadhobbyz 2 ай бұрын

So I marked out where the holes would be by setting it on the hood before hand, then drilled it out making sure it wouldn't hit anything. Then removed the two bolts from the piece under where the removeable part of the hood is and used oversized washers underneath put the bolts through and tightened it down and ran the wires to a toggle. It was easy just took a little time

@musicmaster3255 2 ай бұрын

Do you have any after market control arms or anything. I have a 2000 tundra and the 3 inch leveling kit is making the upper ball joint get jammed between the spring. do you have any solutions besides after market parts. thanks

@killeroffroadhobbyz 2 ай бұрын

I didn't have that at all and I think it's stock

@Ericdagreat 2 ай бұрын

Did you use all front Rovan wheels, or all rear Rovan wheels?

@killeroffroadhobbyz 2 ай бұрын

Rear

@t3floz 3 ай бұрын

great video! How would you compare a granite to mt10?

@michaellamotte6449 3 ай бұрын

Good job

@killeroffroadhobbyz 3 ай бұрын

Thank you very much

@luigynkaren062011 3 ай бұрын

Sir, just quit KZbin you created an R/C community

@killeroffroadhobbyz 3 ай бұрын

I tried too. Sadly the Rc thing was too costly. I do want to keep making videos though even if the Rc content was more popular. Sorry you don't like the new content

@luigynkaren062011 3 ай бұрын

@killeroffroadhobbyz i don't see how we literally bought the R/C in the raffle for you, you had a good thing going, shoot i wish i would of came up with that idea first.

@killeroffroadhobbyz 3 ай бұрын

@@luigynkaren062011 Believe it or not I was losing money on the raffles. I would have to get the Rc back to as close to brand new as possible, It's not as easy as you think. Fixing everything, get brand new bodies and any parts that got damaged at all during testing. Making money on KZbin is not easy. Some people get lucky but I was not one of those people. I miss Rc but my life path just didn't leave room for it. I invested 6 years into it and wasn't willing to do anymore. It was stressing my relationship with my wife even as understanding as she is. I was buying 2 to 3 Rc's a month at times and with them costing anywhere from $300 to $600 it was a lot.

@GREENFROGRC 3 ай бұрын

Almost said KillerOffroad RC, in your intro, pause for nostalgia, side by side is pretty sweet.

@killeroffroadhobbyz 3 ай бұрын

I did the Rc thing for 6 years with little success, sadly I had to move on. Side by sides are sick and very fun.

@Hungrybird474 3 ай бұрын

I use the copperhead 2s stock tires and 4s backflip lp s . The lp s are smaller , not bad , different . On a v5 . Pinion came loose but it jumps 6-10ft high and lands ok I guess . I like the 1/10 arrmas a lot better 1/8 typhon . Seems like the 4s line up is a good choice imo . For me anyways .

@Hungrybird474 3 ай бұрын

Now they’re pretty solid on the v3 so far . They seem to be solid . I’d add a top center chassis brace . Seems like the aluminum bottom braces are heavy and not needed imo . Now there’s so much aftermarket for this . I think the plastic spurs and plastic doffs wear over time , especially the spurs . I do like the truck and use it more than a k6s

@Schmidteren 3 ай бұрын

If you still driving this, the TF-50 transmitter is compatible with old recievers. And can be made left handed. :) I use it on my Savage XS Flux. Looking forward to watching the review fully. Cheers

@christianrobles7561 3 ай бұрын

So you hooked up 4 speakers direct to stereo and the other 4 to amplifier right?😊

@jaxfan 3 ай бұрын

It's been awhile bro. Good to see you back!

@killeroffroadhobbyz 3 ай бұрын

Thanks man

@StarknightMT_official 4 ай бұрын

Hi, we have a new product for X3, if you are interested, please let us know. I don't know why you can't see our e mail.

@X3.Rvxlll 4 ай бұрын

you should look into the zrp dog bones or the lmutv rear bulkhead kit it allows you to take off one radius rod at a time without having to take off the plate and makes it double shear. for my radius rods i got lucky on some geiser performance radius rods and i have a ct race worx gusset kit i need to put on and a zrp alternator kit.

@killeroffroadhobbyz 4 ай бұрын

Very nice and thank you for the info. I will look into it

@lucky13sxs 4 ай бұрын

You should have gone for a whole set. The OEM uppers are dogshit. Zbros stuff is garbage.

@killeroffroadhobbyz 3 ай бұрын

So far they have held up nicely and install was easy

@FGNDWEAP 4 ай бұрын

What exhaust are you running?

@killeroffroadhobbyz 4 ай бұрын

eBay WRX exhaust for same year

@robbylett 4 ай бұрын

Nice review Gary! Do they have RZR products or is it all Can-Am?

@killeroffroadhobbyz 4 ай бұрын

They have many products for all kinds of UTV brands like Can-Am, Polaris, CFMOTO, Honda, Kawasaki and Kubota. Go check out what they might offer for your rig, link is in the description

@justincase948 4 ай бұрын

What ever happened to the RCs man ???

@otablott7779 4 ай бұрын

Im wondering the same thing! It was great content

@killeroffroadhobbyz 4 ай бұрын

I had to step away from the Rc side of things unfortunately 😔

@justincase948 4 ай бұрын

@@killeroffroadhobbyz that sucks man I liked ur Rc look at things

@justincase948 4 ай бұрын

@@otablott7779 it was a good Chan rite

@killeroffroadhobbyz 4 ай бұрын

@@justincase948 Yeah its a bummer for sure and I'm sorry the new focus of the channel isn't your thing

@StarknightMT_official 4 ай бұрын

Thank you for your amazing video!😁

@killeroffroadhobbyz 4 ай бұрын

Your very welcome

@killeroffroadhobbyz 3 ай бұрын

I just sent you a email, I'm hoping we can figure it out

@StarknightMT_official 3 ай бұрын

@@killeroffroadhobbyz Replied you. Have you received it?

@StarknightMT_official 3 ай бұрын

@@killeroffroadhobbyz HI, have you received our e mail?

@killeroffroadhobbyz 3 ай бұрын

@@StarknightMT_official Yes thanks

@craigpoer 4 ай бұрын

Looks nice

@killeroffroadhobbyz 4 ай бұрын

Thanks, I like it very much

@justinfacer6332 4 ай бұрын

I got one of these that didn't have a single scratch or anything with 4 batteries off of OFFERUP for 50 bucks. Pretty sure it was never even driven off road. Looked like the guy bought an abandoned storage shed from the pictures. I'm pretty sure he googled it and one of the first things that comes up in the search results is something that says "typically 49 dollars" but that's just for a body replacement. A once in a lifetime deal for sure. Still can't believe my luck. Just one of the four lipos included costs 70 dollars and only 1 was even opened.

@StarknightMT_official 5 ай бұрын

Hello, Are you interested in testing our products? We would like to invite you to test the Scratch-Resistant Windshield for your 2018 Rzr XP 1000

@killeroffroadhobbyz 5 ай бұрын

I no longer have the RZR but if you have the same thing for a 2022 Can-Am X3 I would gladly test and review it for you. Let me know I am very interested

@StarknightMT_official 5 ай бұрын

@@killeroffroadhobbyz Hello, thank you. yes, we have a product test for 2022 Ca-Am X3, please share your con tact way

@killeroffroadhobbyz 5 ай бұрын

@@StarknightMT_official [email protected] shoot me a email

@StarknightMT_official 5 ай бұрын

@@killeroffroadhobbyz Ok, please check your inbox

@StarknightMT_official 5 ай бұрын

@@killeroffroadhobbyz ok, please check it.

@landondavid5773 5 ай бұрын

Jack stands!!!!!! That’s rule number one!! To not have jack stands is a major fail in my book and therefore I do not take you or anything you say seriously.

@Michael_Wehrley Ай бұрын

He used a jack stand.

@ahmadzakitaimoori5057 Ай бұрын

no one cares if you take him seriously or not landon

@Nick-lo7nn 6 ай бұрын

Hey the link you posted doesn’t work anymore. Any way you can give me any info where I can find this kit?

@kmakattack89 6 ай бұрын

If it was an ebay link. Ebay got sued. They can't sell mods like that anymore

@AF-lq7qg 6 ай бұрын

I run 4S on my mini record! That things goes fast

@nunyadambidness1444 6 ай бұрын

You just helped me big time ty

@aaronbrown6266 6 ай бұрын

This is ok for a pavement princess. If you're planning on doing any real off-roading, this is a bad idea. Use a true coil spring lift. Spacer lifts aren't recommended for heavy off-road (collapse/crack risk). They're fine if you just want a little extra added meat for on-road driving.

@killeroffroadhobbyz 6 ай бұрын

This is a 2WD

@aaronbrown6266 6 ай бұрын

@@killeroffroadhobbyz So, pavement princess.

@killeroffroadhobbyz 6 ай бұрын

@@aaronbrown6266 Sure

@thomashensley3319 6 ай бұрын

Hows this holding up? Found one local 8s for 450.00 do i buy it?

@killeroffroadhobbyz 6 ай бұрын

Held up great. If you think its a good buy and you got the money......... I say buy it

@thomashensley3319 6 ай бұрын

@@killeroffroadhobbyz Thanks 👍

@thomashensley3319 7 ай бұрын

Just found one converted to 8s for 500.00 anything to look out for?

@Pitman556 7 ай бұрын

Will 255 85 17 fit on here now? Or 35s?

@jamesmills8794 7 ай бұрын

About to install a trail gear kit and was wondering how yours is holding up to wheeling purposes ?

@BK-hx9ho 7 ай бұрын

Did you have to get it tuned after installing the cold air intake?

@mandosgarage 7 ай бұрын

Ughh but how did you do the diff lock 😩

@killeroffroadhobbyz 7 ай бұрын

Steel stick in center diff and steel stick in front diff

@mandosgarage 7 ай бұрын

@@killeroffroadhobbyz do I have to take out the internals ? Or put it over the internals

@killeroffroadhobbyz 7 ай бұрын

@@mandosgarage No just put it in with the gears and give it time to set up

@LizzardDude58 7 ай бұрын

Nice video. I have a cupla questions for you though. 1. How many miles on the motor? 2. Did you say you're running 37" tires? I have a 94 same engine w 230k and am running 33 x 12's. I tried 35's once and just didn't have the power. Mines a daily also that i do mild to moderate trails with. Does well with the 33's but the 35's made her struggle. Running 513 gears also. anyways nice job.

@josecarlosjimenezalmazan5985 7 ай бұрын

Muy buen vídeo !!! Hay muy poco contenido de los 2.5L ❤

@javiersanchotena3077 8 ай бұрын

Nice work I need something like that for my 2004

@mzondi1970 8 ай бұрын

I just bought mine today from a man they got a sale going on it and when I added my a main points in with it I think I paid $300 for it

@marcoss4563 8 ай бұрын

my kit comes with yukon free lock hubs and yours with AVM interesting.. thanks for the video.

@javiersanchotena3077 8 ай бұрын

Sounds amazing 👌👍

@PhantomMark 8 ай бұрын

I mean if you are honest you just drove that like a complete 7et4rd , for the review no doubt, no normal owner would do that unless they are a little simple I guess ??

@brianneston8575 8 ай бұрын

How many hours does it take to do a timing belt on that 4.7

@jasefoster1272 8 ай бұрын

Ugliest tundra I’ve ever seen

@DevonWikstrom 8 ай бұрын

Did you ever figure this out? This happened to me when I changed the boost control solenoid... there's a restrictor pill within one of the boost lines. I put that line with the pill back in and it ran to 20+psi

@killeroffroadhobbyz 8 ай бұрын

I did, it was over boosting. I had to turn the boost down

Ең жақсы KZbin

Пікірлер