Project Complete

Пікірлер

@aliasmohdariff9229 17 сағат бұрын

tq. it help

@JohnnysChingaderas Ай бұрын

4:45 where did you get that little shop chair?!?!

@ProjectComplete Ай бұрын

Got it at Sears in my hometown before they closed. It’s a craftsman.

@mhelander1337 Ай бұрын

Great, straightforward video. I'm in the process of changing the orings on my 1979 115 Johnson from my late father. It's actually also mounted on a glastron, mine is a 1980 SSV 167!

@muznick 2 ай бұрын

I just got the newer version for my Silverado. It ain't cheap, but the drawers have been 100% dry inside so far. If you aren't planning on getting a bed cap, it's worth it. A DIY drawer system is unlikely to be as waterproof.

@mikz86ta1 2 ай бұрын

So we went back to stocks but instead of getting quality stocks we got cheap Chinese knock offs? 😆 Ok

@ProjectComplete 2 ай бұрын

So, I guess it depends on how you look at it. These American Modified lights are made in China, but in no way detract from their quality. Once you have them in your hand, you can tell the difference between these branded lights and for example a cheap Amazon Chinese knock off.

@mikz86ta1 2 ай бұрын

@@ProjectComplete good luck. They are gonna leak in 6-12mo. and have moisture inside them

@robraven7776 3 ай бұрын

Well I did this thinking it was a good preventive measure...well !.....old adage...."if it ain't broke...don't fix it !! This stands soooo true. After doing this procedure, I lost even more pressure on the hot water side. Spent days watching videos and reading but to no avail. Finally, just looking and studying the hot water heater tank, I looked at something odd...the outlet was 3/4 going to 1/2 line to the house. After wrestling with the fitting, I got it apart and there was the problem ! I disturbed the sediment and when I turned the water back on, the hot water side picked up the loose sediment and plugged my outlet side of the HWH. I cleaned it up...and every thing is fine now. PS, you might want to add that in your video.

@omarvaldez8080 3 ай бұрын

Buenas noches,con una duda por qué mi trim golpetea el motor cada. Vez que lo bajo,gracias

@ProjectComplete 2 ай бұрын

I dont know what you mean by "hit the engine". Can you provide more description?

@omarvaldez8080 2 ай бұрын

@@ProjectCompletegracias por tu respuesta,me refiero a cuando el motor está en la posición de arriba,al bajarlo con el trim hace movimientos bruscos,da muchos brincos!!!!

@mikewalters4958 3 ай бұрын

Nice Johnson #NoHomo

@tonylock7766 4 ай бұрын

I'm at seal kit do they contain the seals for the center hydraulic cylinder we have one from the same year bought that exact kit and it did not contain the main cylinders seals

@ProjectComplete 4 ай бұрын

I believe they include the seals for everything in the hydraulic trim and tilt unit. But I’m not 100% sure. I didn’t end up using all of the seals in the package.

@Cherishthemoment 5 ай бұрын

Great video, you are the first guy I have seen that did it the right way.

@hikingsteven7665 5 ай бұрын

thanks that was helpful beutiful boat yo have

@badhandjim2524 5 ай бұрын

Decked came out with a new version that fixes the anchors. It now has eight tie down point incorporated in the system. This is video refers to the old legacy system

@ProjectComplete 5 ай бұрын

Yes that is correct! I’m glad they were paying attention. Unfortunately for me, mine only comes with an extra purchase rail system with low ratings. Even with the new ones, I feel more comfortable with a higher rating and bolted into the bed of the truck.

@badhandjim2524 5 ай бұрын

@@ProjectComplete Actually, the new ones are bolted to the bed of the truck. Decked revised the mount so it passes through the system and attaches directly to the manufacturers original tie downs so it is directly connected. Not knocking your idea, just pointing out that this is for the legacy system rather than the new one.

@MrSmurf459 5 ай бұрын

Chevy/GMC has way better truck bed

@Sphere3601976 5 ай бұрын

Thank you! This was very helpful!

@phongphungba7657 6 ай бұрын

Máy Yamaha 60 bên xuống không hết là bị gì

@daveforeman6931 6 ай бұрын

There is a debate between plumbers as to whether draining is necessary at all, but if I drained mine I woulld use the drained water to water plants or some other use rather than draining out to the street. Great video for those wanting to do this.

@davidh1314 7 ай бұрын

The new, GEN2 drawer system now has waterproof ammo cans! 10% military discount also

@rlh686 7 ай бұрын

Your dog shouldn’t ride in the bed of the truck anyway

@mandy10ca 8 ай бұрын

Finally someone who is showing us the wiring.

@jackconway3248 9 ай бұрын

Nice video. Very brittle plastic - how do you replace one of the 3 led lights when they burn out?

@ProjectComplete 8 ай бұрын

Hasn’t cracked so far, but yes it’s no OEM plastic. Haven’t had a light burn out yet. There are two little screws on the backside of each light that holds them in. Idk if they make direct replacements as I haven’t looked, but they are removable.

@omegaman6770 8 ай бұрын

@@ProjectCompleteCan you access the bulbs and replace them with the grill on the truck or do you have to remove the grill to get at them ? 🤔

@chriscraft410 10 ай бұрын

What tool did you use?

@pavloskourris277 11 ай бұрын

great

@rle2124 11 ай бұрын

Why would you not scoot back so we can see the truck with the grill other than inspecting your paint job?

@justinboonstra3906 11 ай бұрын

This is exactly what i wanna do if i buy this grille. Was it easy to get a crisp line with taping?

@ProjectComplete 11 ай бұрын

Yes, the right tape and prep really helps.

@briancc2100 11 ай бұрын

Why would you waist that kind of money on a ford? I guess the plastic would be stronger than ford aluminum

@franciscoadolfo5805 11 ай бұрын

Nicely done

@Dmann87 Жыл бұрын

Not supposed to use power tools it even says on the box.

@GmailGmail-gg8lt Жыл бұрын

i just finished refilling the unit and changing the seals. the seals seem to be holding, the pump runs, there's power to the button, but the motor wont go up or down. i can feel pressure building in the pistons, because there is resistance, but i am at a loss as to why it wont pressurize and function. any thoughts?

@ProjectComplete Жыл бұрын

Can you manually raise and lower the motor. If not the pistons may be seized and/or the rebuild/gaskets were done wrong. If you can manually raise and lower. The pistons aren’t seized and the hinge point may be. I’d try disconnecting the piston from the motor and see if they move. If the do and your motor hinge point is not seized. Your pump may be acting up and not providing enough power to get the motors weight up and down. I’d start with check oil and going from the top of this message through the rest.

@GmailGmail-gg8lt Жыл бұрын

Yes, i can raise and lower it. I'll need a had to remove the piston and raise and lower it, but i think it will move. I released some air and think i may have released too much oil in the process. The pump is making some weird noises now, but it seems odd to have been working fine before the project and now...failing. but i guess everything has to break at some point. thanks for the feddback. i'll let you know what happens once i disconnect the piston@@ProjectComplete

@raifcrosley158 Жыл бұрын

That was the perfect video that's exactly what I needs to see I'm about as green as the grass when it comes to these boats LOL thank you thank you very much and looking forward to more helpful hints.

@ProjectComplete Жыл бұрын

Glad I could help!

@GenericUserUnknown Жыл бұрын

Thanks for taking the time to create and post this video. The level of detail is great.

@ProjectComplete Жыл бұрын

Glad to hear it helped!

@ronpassmore7053 Жыл бұрын

Do you happen to have a video on how to replace the trim motor (in case that is what I need to do)? I loved your video as I have an Evinrude VRO 140 (1985) (On a Glastron), so it looks very much like your boat engine.

@ProjectComplete Жыл бұрын

No I don’t sorry, I’ve never had to replace mine.

@ronpassmore7053 Жыл бұрын

Thanks for the great instructions! Exactly what I need ...... as soon as Hillary passes through.

@andygilbertson8925 Жыл бұрын

Awesome vid bro..... Your just saved me alot of money! Keep up the good work, sweet boat by the way!!!

@ProjectComplete Жыл бұрын

Thanks! Glad it helped.

@bongo042 Жыл бұрын

It would've been nice to see how you removed the pistons.

@ProjectComplete Жыл бұрын

To remove the pistons. You use the pronged tool to remove the caps and they just slide out. There is nothing that holds them in other than the cap and o ring around the piston. Hope that helps!

@blacktrout Жыл бұрын

oh dope i gotta do this to my ranger

@michaelalmoney4531 Жыл бұрын

What a beautiful old boat, and with your know how it should stay that way.

@alnowacki7422 Жыл бұрын

Ji I

@Papapickles69 Жыл бұрын

Appreciate the upload man, beautiful boat brotha.

@nicolebraxton6273 Жыл бұрын

If we just bought the boat and lost contact with the previous owner how would we know what fluid is in there?

@ProjectComplete Жыл бұрын

You don’t but, it’s not like an engine oil change. If it were me id try to drain as much as possible and replace. If they did it the correct way they should have used hydraulic fluid.

@bart2u Жыл бұрын

What size allen rench for the fasaner the holds the bracket at the bottom of the grill?

@philip6419 4 ай бұрын

Same size as your IQ.

@tuberOOSKI Жыл бұрын

Well done and very informative. Thank you! What is the approximate fluid capacity?

@ProjectComplete Жыл бұрын

Sorry I don’t remember. I believe it was about 1.5 quarts I used, but it also loses fluid in the fill process.

@tuberOOSKI Жыл бұрын

@@ProjectComplete Thank you

@SDADDYWSL1TR3Y Жыл бұрын

My 1979 85 hp seals are leaking I can’t find the part and I’m not sure if that’s the proper term for the part? My mechanic can’t find any online but he said if I find the parts I could do it myself , can you help identify the part for me? It’s the circle thing with the 4 holes in it , he said that’s all I need to replace

@slagletoby Жыл бұрын

Sweet boat and I’m sure your grandfather is happy that you have it as he looks after from above ❤️🙏 Thank you for posting and this vid is very helpful. Stay awesome!

@ProjectComplete Жыл бұрын

Glad it helped. Yes, I’m sure he’s happy it’s getting use!

@jflesh9240 Жыл бұрын

Did this fix your pressure issue?

@ProjectComplete Жыл бұрын

So this is a preventative measure to help with sediment going through the lines to faucets or appliances. Actually fixing the issue would require you to remove the screen filters at the faucet or appliances to clear out the restriction.

@numbedbyreality Жыл бұрын

It looks like you have an orange strap around the lower end while you have the engine up. Is that for extra safety? What do you strap it to?

@ProjectComplete Жыл бұрын

I only did that to remove the pin to the center hydraulic. It was attached to a beam on the exterior over hang of the house. It allowed me to raise and lower the motor without a second hand and get fine adjustments to reinsert the pin. If you are not replacing seals you don’t need to remove the pin or detach the hydraulic from the motor mount the standard safety catch on the motor is all you need. When you have to remove the pin, the motor has to raise past the safety catch. I just didn’t want it slamming back down on the safety catch when the pin get removed. When you are just checking and refilling fluid the motor needs to raise and lower freely.

@jims4539 Жыл бұрын

Have similar trim/tab that all wires were cut -any way you could for quick talk? Thanks.

@ProjectComplete Жыл бұрын

Message me on Instagram. Hit the follow button first so the message comes through. instagram.com/project_completed?igshid=YmMyMTA2M2Y=

@tooneboone3869 Жыл бұрын

I just bought and installed a new water heater to replace one that was working fine (electric) because it was leaking. I had plenty of flow with the old heater but only a trickle with the new heater. I hooked the water inlet supply directly to the outlet to the faucets (bypassing the heater) and had plenty of flow proving that my plumbing was OK, I was refused a replacement water heater and only offered parts to try for a fix. KNOW WHAT THE PROBLEM WAS??? SOMETHING WAS LEFT INSIDE THE NEW HEATER THAT PLUGGED THE OUTLET FOR THE HOT WATER. I was just left on my own!!!!

@ProjectComplete Жыл бұрын

I applaud your do it yourself courage. DIY is all about trying things you have never done before! Glad you got it figured out and hope the video helped!

@truestoryz Жыл бұрын

good video thanks

@WillemLuntungan Жыл бұрын

Good job ❤

@markreeder8509 Жыл бұрын

Stinky feet boss.

Ең жақсы KZbin

Пікірлер