Awesome just picked one up! Thanks for the explanation
@jP-nw7nm11 күн бұрын
what stock is that one in the back?
@d.lawrence805927 күн бұрын
Called 4 different gun shops, none could help and one of them wanted to send my bolt out to Ruger to put back together however after watching this video a few times I was able to recork the pin and get it all back together working properly. This was after the removal tool slipped out while upgrading the bolt handle and shroud on my Ruger American Gen 2. Thanks, this saved me a huge hassle getting mine back together!!
@ryanbieberich6332Ай бұрын
This install also works the same for an Axis gen 1. Use a 1/4" Allen wrench. I like an electric impact for taking it loose. With the bolt being in a vise with plastic/rubber jaws. Then normal Allen wrench to retighten. Just my recommendation. Anarchy Outdoors makes great products! ABSOLUTELY LOVE THEM!!!
@TN_vigilanceАй бұрын
Does the rifle come with a 0 or 20 moa rail?
@keithb.commonanglerАй бұрын
Have you ever thought of making match barrels for RPR. Barrel manufacturers are a bit limited on choice and, of course, expense, just a thought. I have bought several items for mine, and the extended mag release will be next 👍 keep up the great and innovative work.......
@MMcGue313Ай бұрын
From reading, and researching, I think till technology catches up with a SBS and folding adaptor combining, it’s just not in the cards. U get to pick either side. I’m making my SBR a folder and the mid-long ranger the nice recoiled one. Till they make this stuff actually congruent wit each other. Just bought a sylvan arms folder and a gen 4 armaspec SBS.
@herrprepper2070Ай бұрын
What advice would you give my cousin Elwood? He lost both hands in a poker game and will have to remove the bolt screw with his feet. Thanks.
@bongdudugenio9947Ай бұрын
I had 44 Objective Lens Scope (1" Tube) with Base Scope Area 419 30-MOA. what height ring should be best for 100 - 300 yards. Thanks
@PatrickBeasomАй бұрын
Is your replacement bolt handle compatible with an older 10FP (like pre-accu trigger era) with the bolt release mounted on the receiver?
@lkeller7792 ай бұрын
Thanks
@dionysis842 ай бұрын
Alpha vs Tuxedo for RPR (9 1/4” hands)? Just missed the sale on the alpha as I thought it would go through weekend but now I’m not sure which one will fit better
@AnarchyOutdoorsOfficial2 ай бұрын
Go Alpha grip.
@kerrystanger53242 ай бұрын
Hell yea. Exactly covered what I had questions about. Thank you.
@AnarchyOutdoorsOfficial2 ай бұрын
Glad it helped!
@PopShot762 ай бұрын
I bought a Heatseeker chassis that was advertised as gen ii compatible. I had to file a notch for the safety to operate.
@AnarchyOutdoorsOfficial2 ай бұрын
All of the newer production ones are but the older ones are not.
@Mark-qq7io2 ай бұрын
But yet you let thousands of these break over the years before fixing it
@AnarchyOutdoorsOfficial2 ай бұрын
Yes they did.
@Mark-qq7io2 ай бұрын
You need to check this before you release a video it's called quality control
@AnarchyOutdoorsOfficial2 ай бұрын
What part?
@VictorMartinez-ud9ji2 ай бұрын
Would they fit in a thompson center Lrr?
@AnarchyOutdoorsOfficial2 ай бұрын
If the Thompson Center LRR is in an AISC compatible stock.
@allanfischer94172 ай бұрын
I bought a bolt handle from them a few yeas ago, changed it out and it works VERY well - definitely worth it in my opinion.
@AnarchyOutdoorsOfficial2 ай бұрын
Thanks for the comment!!! Glad you are loving the handle.
@dionysis842 ай бұрын
Is their aftermarket triggers for the Mr-x?
@ludogg19682 ай бұрын
I can follow there is firing pin and bolt change in the Ruger custom shop and it was carried forward to the production models "3.5". Is it correct to say this only applies to the "Short Action" Ruger Precision Rifles (cal .223, .308, & 6.5 Creedmoor)? Should be stressed.
@AnarchyOutdoorsOfficial2 ай бұрын
That is correct.
@johnhockgeiger78782 ай бұрын
Are any of your upgrades gonna match the gen 2 factory bronze cerakote on the predator model? Such as bolt knobs.
@AnarchyOutdoorsOfficial2 ай бұрын
Not at this time. But we can look into it.
@michaelhill64512 ай бұрын
I have a Tikka CTR Stainless in 6.5 Creedmoor. It is by far the most accurate factory rifle I've ever owned.
@AnarchyOutdoorsOfficial2 ай бұрын
Tikka are amazing production rifles.
@chriscosby24592 ай бұрын
I want one of these for my 7mm Rem Mag. The bolt sometimes has some resistace after firing a round. This should be enough leverage to ease the lift for case ejection.
@AnarchyOutdoorsOfficial2 ай бұрын
Pick one up today!!!
@ClemonsHuntclub8763 ай бұрын
Thanks
@AnarchyOutdoorsOfficial3 ай бұрын
No problem
@Mex_the_Fox3 ай бұрын
Your designer did a sloppy job designing the laser templates....
@AnarchyOutdoorsOfficial3 ай бұрын
Please elaborate.
@AnarchyOutdoorsOfficial3 ай бұрын
Thanks for the feedback.
@Mex_the_Fox3 ай бұрын
@@AnarchyOutdoorsOfficial the pad didn't seem to have the right size... I'm designing stuff like that myself and I'd not be happy with the size of the pad... It's to small and doesn't have the right shape...
@franciscoortiz97303 ай бұрын
Will this fit the savage axis II precision?
@AnarchyOutdoorsOfficial3 ай бұрын
It will fit any stock or chassis that take an AR style grip.
@oconnomm3 ай бұрын
Whiskey 3 in thumbnail on your bravo video btw
@AnarchyOutdoorsOfficial3 ай бұрын
Thanks
@jst4kix3 ай бұрын
Very interested in your grips! How are these grips constructed? 3D printing, injection molding, some other process? Also, I wear 2XL gloves; should I get the Alpha or the Emperor grip? What is the size differential between the two? Thanks so much!
@AnarchyOutdoorsOfficial3 ай бұрын
These grips are produced using additive manufacturing. We have discounted the Emperor grip so I would suggest the Alpha and you will be fine.
@AnarchyOutdoorsOfficial3 ай бұрын
These grips are made from Nylon 12 via an additive manufacturing process. We have discontinued the Emperor so I would go with the Alpha.
@jst4kix3 ай бұрын
@@AnarchyOutdoorsOfficial thanks so much! I really appreciate the info. Have a great day!
@dvskane18083 ай бұрын
So in the case of having double sling studs, can I use the forward most hole in the stock to still have a sling stud for the bipods I already have and use the screws like on the Bergara for the second mounting point? Which would leave with a shorter Arca rail but still the ability to use sling stud mount bipods?, nevermind I see that is totally possible, should have watched the whole video before throwing out questions.🤦🏽♂️
@AnarchyOutdoorsOfficial3 ай бұрын
Always here to help. Thanks for the comment.
@deeeeeeps3 ай бұрын
Don't pinch your skin cuz that would hurt 20 seconds later bleeding from finger. Spring goes flying- Be careful not to lose spring. Now we need to reset this up into that slot (shows spring jacked in slot) Cut scene . Little tough to do that. There ya go! Hmm
@AnarchyOutdoorsOfficial3 ай бұрын
Thanks for the comment.
@AnarchyOutdoorsOfficial3 ай бұрын
Thanks
@Rico11b3 ай бұрын
I hate hate hate AICS magazines. I prefer the AW double stack double feed. They are MUCH simpler to load and unload. AICS are horrible compared to AW mags.
@AnarchyOutdoorsOfficial3 ай бұрын
thanks for the feedback.
@branham76283 ай бұрын
He is not going to fast, Y'all are just to slow.
@AnarchyOutdoorsOfficial3 ай бұрын
Nice
@yungskullivan3 ай бұрын
Can you shoot sabots out of the muzzle loader muzzle brake?
@AnarchyOutdoorsOfficial3 ай бұрын
Yes but we don't recommend them as the do not create the best seal when seated.
@HellNell-zb8ib3 ай бұрын
Does it fit the hk9 vpl ??
@AnarchyOutdoorsOfficial3 ай бұрын
Email our customer support team.
@davisjames84843 ай бұрын
So does it make the throw different? Are the angles of the bolt handles different? Whats different about the stock one and this custom one?
@AnarchyOutdoorsOfficial3 ай бұрын
Yes our handle makes the rifle feel very different. The angel is more swept back towards the shooter.
@symply.complycated4 ай бұрын
Does this fit the Savage 110 Magpul Hunter LH version?
@AnarchyOutdoorsOfficial3 ай бұрын
Yes
@kodiakpb4 ай бұрын
You need to make a video showing how to get the stock handle off. It does not simply unscrew.
@azar30063 ай бұрын
These guys are confusing b14 vs. b14r which is a rimfire rifle !
@AnarchyOutdoorsOfficial3 ай бұрын
I believe so.
@randywhelchel46744 ай бұрын
NOT super helpful .. here lets help you decide we did some testing but I am not going to include any of that data here the one you one you use is it decrease it "A lot" (Is that a technical term?) which is naturally the one I was most interested in 😡
@AnarchyOutdoorsOfficial3 ай бұрын
Thanks for the feed back.
@randywhelchel46743 ай бұрын
@@AnarchyOutdoorsOfficial I did more research and ordered 2, will be getting 3 more next paycheck
@kylechivers48214 ай бұрын
May be good product but this idiots muzzle control and knowledge of safety is complete crap. Bad gun owner.
@KevinWood444 ай бұрын
Buy a tripod, I feel sea sick watching this
@AnarchyOutdoorsOfficial3 ай бұрын
thanks
@charlesbuttry69214 ай бұрын
I am sorry if you listed the reason for the NEED to change out the shroud I missed it, unless you was indidcating the the shroud will protect the cocking mechenism.
@AnarchyOutdoorsOfficial3 ай бұрын
The main reason is to add weight. The more weight help the bolt run and feel smoother.
@afrausto21344 ай бұрын
Would this work well with glock 20c? Is already Ported but more stability can't hurt 😂
@rhodycars60584 ай бұрын
Scanned the QR code for install on my VP9 comp can’t find the proper video just links to the channel. What is the torque specs for the vp9 comp sold by HK USA?
@blurker774 ай бұрын
What's the best way to compress the spring back down to take the extension off with out damaging the spring?
@richr72154 ай бұрын
How much length and weight does it add to the gun? Are there any versions that allow you to have a pic rail under the comp?
@AnarchyOutdoorsOfficial3 ай бұрын
Please email our customer support with your questions.
@sal64234 ай бұрын
Don’t waste your money the original mag release it’s better. I order one and was disappointed it is wider but still hard to manipulate with your thumb so I returned it and to my surprise they had a restocking fee which was not mentioned buyer beware!
@AnarchyOutdoorsOfficial3 ай бұрын
Thanks for the feedback.
@btsantiago524 ай бұрын
Can I just replace the knob w/o changing the bolt handle.
@AnarchyOutdoorsOfficial3 ай бұрын
Yes you can.
@gamelord10004 ай бұрын
Totally awesome.
@AnarchyOutdoorsOfficial4 ай бұрын
Thank you.
@levicress42434 ай бұрын
I've been loving the prototype versions so far. I even put my ckye pod on there this past Saturday and the Kestrel holder has been great. I'll be interested to see what else you come up with. Thanks!
@AnarchyOutdoorsOfficial4 ай бұрын
Hey Levi, thanks for the support.
@d0peshow5 ай бұрын
Is gen 1 worse than later gens? Can gen 1 be upgraded to later gen parts?
@AnarchyOutdoorsOfficial5 ай бұрын
Gen 1, Gen 2, and Gen 3 pre April 2021 all use the Gen 1 parts. After April 2021 the parts changed.