Michael Paul

Пікірлер

@dwfinds3030 Ай бұрын

Definitely upgrade looks so nice. Thinking about doing my basement floor.

@AzPauly Ай бұрын

just picked up a '97 w/4k on it, will need spring work... watched this 2x...coming off a xr650l x18 years...light(er) is right..👍

@mrpoolplayer6379 2 ай бұрын

Can you thin it & have a lighter finish...?

@MrMikepaul8 2 ай бұрын

I am not sure. Just thin out a little bit in a separate container and try it on a scrap piece of wood.

@Weltbummler23 2 ай бұрын

Great build. Now all u need is the big bore kit and will be gold up to 75 on freeway.

@Sam-xt5gb Ай бұрын

which big bore kit? I got the pumper carb on it and I can hit 65 but any higher is uncomfortable

@Weltbummler23 Ай бұрын

@@Sam-xt5gb built motors / thumper racing still has a big bore kit, i think around 430cc

@djbassick 2 ай бұрын

How's it look 7 years later?

@johnconsidine8432 3 ай бұрын

I am looking at a 1999 Suzuki 350 they want 2700 it has 7500 miles on it do you think that’s too much I’m thinking like more off 2500

@MrMikepaul8 3 ай бұрын

I wouldn’t walk on it for 200. If it’s registered and has all the paperwork and it’s in good shape…..you can’t touch a dual sport for that kinda money. I’m still always looking at the used dual sport market and for 2700 bucks gets you this bike turn key with documentation I would jump on it. But remember I am very biased about this bike cause I love it.

@PetterIvarsson 5 ай бұрын

Good talk! Many of these old bikes sell like cupcake here in Sweden now. A bike like this was up for sale in the morning and buy noon it was gone.

@wheelie_boyz_187 7 ай бұрын

What's the model number on your CDI

@doccops 7 ай бұрын

Thanks for the video, I guess you won't be doing many more but no worries ;) I have an enduro and an electric start, brilliant bikes.

@fusionlabs6215 9 ай бұрын

Whoa $13.50. It's over $25 at my Lowes 8 years later.

@backstreetzero2019 11 ай бұрын

Nice bike and great mods, only thing I’d add to “finish” it is adding a kickstart.

@aznskrachmaztah Жыл бұрын

Are you going to dry lock the floor?

@JmieYoutube Жыл бұрын

Hey Michael, thanks for posting this up. It’s been 7 years, how’s it holding up? Thanks for your time

@tracyandersonmd Жыл бұрын

Dude, love the no-nonsense video. Thanks for all the great info. The first thing I need to figure out for my recently purchased 1999 model is tires. Unfortunately, you don't list these. I want something like the Mitas E-09 or E-10, but these are not available in the 80/100 and 110/100 that come on the DR350 (not sure if these sizes cannot be changed) What tires did you go with??

@Itsjake908 Жыл бұрын

Selling?

@tmangan327 Жыл бұрын

How many coats did you do?

@MrMikepaul8 Жыл бұрын

@alexibonnet2634 Жыл бұрын

A low and expensive fix is Try putting a pool noodle cut to size and put it vertical in front of the skimmer squeeze it in between the top and the bottom. They were by the pool cleaner, world bump into the pool noodles, and I get stuck in there.

@alexibonnet2634 Жыл бұрын

The poor skimmer will not get stuck. It will bump into the pool noodles.

@johnw9874 Жыл бұрын

Thanks for sharing. I, too, love the DR350S. Mine is a 1991 that is still running strong.

@ant4278 Жыл бұрын

Nice bike just picked up the same bike today 3000 miles on it can't wait to do some upgrades to suspension.

@hdb1975 Жыл бұрын

How much did you pay for it?

@TheRuralOnes Жыл бұрын

One more question Mike! For your “off road” carb swap (Mikuni TM33) did you go with the Niche Cycle conversion kit by chance? I’m about to pull the trigger on it but trying to find someone with some instillation feedback. Niche Cycle provides machined adaptors for air and engine side with new motion pro cables. Thanks for any help!

@hendrikpot7143 Жыл бұрын

Hey Michael, love the video! Is there any chance of you considering parting ways with this bike in the future and selling?

@MrMikepaul8 Жыл бұрын

@TheRuralOnes Жыл бұрын

I’m looking for the jns headlight, might be a noob question but is it the same light for the dr650? I don’t see one labeled for the 350. Thanks! Slick bike and I have a purple frame as well 🤙🏽

@MrMikepaul8 Жыл бұрын

Check out procycle.com. It’s labeled 90-93 dr350s. It fits in any dr350

@Dastardly_X Жыл бұрын

Very helpful, Thanks 🤘🤘🤘

@nintendad1166 Жыл бұрын

Just did my entire garage in this and am about to apply shellac. Thanks for the tips - great upload.

@boneyardrescue8615 Жыл бұрын

how is it holding up im painting with this product tomorrow

@ShaneZettelmier Жыл бұрын

I agree on the aftermarket tank, they do look pretty bad and get dirty and stain easily. Lately I’ve been wondering if you could put a wrap on them from a vinyl place, then you could even integrate some new graphics, but if you could take it off and have it wrapped in it would be slick vinyl and everything we just rinse off of it, I’m just not sure if it would stick or not

@ShaneZettelmier Жыл бұрын

The tank and seat look to be in great shape. If that thing is pretty much rust free inside you’ll probably make a good bit of your money back selling that in the original seat, they’re getting pretty hard to find

@ShaneZettelmier Жыл бұрын

You got great taste. If I had to choose 3 Bikes it would be a KLR 650 a DS 350 SE and a TW 200. I’m looking for TW 200 now because I’ve got back any problems and it being lower is more practical for me but other than that the DR 350 SE is pretty much my favorite. I would love a 1984 XL 350 but this has an electric start. Lol. I’ve driven an XL 600 as well and it’s great but I really like the 350, it’s a lot easier to ride yet still has plenty of power, I can see where a younger person might want a little more power or speed out of it but the 350 is very formidable. The 250s are good but I always want a little bit more power. I think the KLR 650 has nearly perfect as it is, the TW 200 is great but I would definitely like to see it come out in a 250 or 300 cc, it’s just a bit under powered even for what it is but even with only the 200 it’s awesome, just a slow version of awesome. The DR 350 SE is just a great combination, very good off-road pretty good on the street as well plenty of power but not too out of hand come on my only real complaint on it from the stock version is the seat is kind of uncomfortable but the seat concepts fix works great. Other than putting an electric starter on a Honda XL 350 I think this is one of the best bikes out there for just a good all around tool sport do everything bike, the only exception to that would be if you’re really short.

@ilyaivanov2283 Жыл бұрын

Благодарю за обзор байка 👍

@bikingwithmykids7358 Жыл бұрын

Just watched both your videos on this product. Great review video coved all the key point! 👍

@ST4R_P4WS Жыл бұрын

Airborne at takeoff

@Iamthewatchingsamurai Жыл бұрын

Great video, thanks for including all the pricing and info. I’m looking for those 1inch Tusk bar risers, and I don’t think I can find the specific ones. Were they the 1 1/8? Also, I’m 6’3 with the same 1990. How tough was it to install those JNS 1 inch lowered foot pegs? I would like to do that as well, but I have heard it can be pretty challenging. Which specific USB port did you get? I’d like to buy one as well.

@MrMikepaul8 Жыл бұрын

On Amazon Tusk Handlebar Risers 7/8" Bars, 30mm Height for Suzuki DR350SE 1994-1999 JNS foot pegs, piece of cake. On Amazon Vemote Motorcycle Phone Charger USB, Waterproof 6.8A Dual Port QC3.0 Fast Charging, Quick Disconnect SAE USB Adapter, Voltmeter, ON/Off Switch&Fuse for Phone,Tablet. (7/8inch Handlebar, Blue)

@Iamthewatchingsamurai Жыл бұрын

@@MrMikepaul8 thanks a ton man!

@bresgear7960 2 жыл бұрын

Did the shellac reduce the pine smell in your attic? Also, how long did it take to stop smelling of shellac. Thanks!

@MrMikepaul8 2 жыл бұрын

I don’t remember exactly how long it took to not smell like shellac. But it definitely still smells like pine. Because it’s alcohol based it drys real fast and the smell didn’t linger as long as paint in my opinion. But 100% still smells like pine and 0% shellac smell.

@bresgear7960 2 жыл бұрын

@@MrMikepaul8 okay thank you! I have just had maple plywood installed with a thin layer of natural polywhey 3 weeks ago and the wood smell is still so strong it burns my eyes so I was hoping shellac would seal in some of the wood terpenes. Good to know it didn't change the strength of the wood smell. Thank you!

@vincentvalentine9417 2 жыл бұрын

still holding up? im about to order some of this

@MrMikepaul8 2 жыл бұрын

Still looks great except. No complaints

@vincentvalentine9417 2 жыл бұрын

@@MrMikepaul8 wow thanks for the update

@geraldnichols1853 2 жыл бұрын

Awesome! Doing my little 16x20 small cabin in white pine t/g. Using this same shellac. Looks great!

@lenshandcraftedwoodsigns6033 2 жыл бұрын

Thank you, GO SOX

@Rick16092 2 жыл бұрын

How do you get water out of wood stain ?

@republicansthatdidntvotefo1605 2 жыл бұрын

I am thinking the same thing because I do the maintenance on our vehicles, I use Jack stands and I'm afraid the Jack stands will dig into the epoxy floor? And The use of a floor Jack, with steel wheels I don't think apoxy will hold up? And it is many times more expensive.. Thank you for the video I saw your Jack stands and I am sold....