That was awesome! I liked the presentation and keeping it real by including the little mess-ups showed how most projects go and help us to avoid them. Thank you kindly
@rbvindas14127 күн бұрын
My 88 GMC v3500 doesn't shift past 1st. Any idea why? Seems like same exact transmission
@AndrewNichols11 күн бұрын
invariability a great man eventually says "don't tell my wife about the oven"
@timolheiser787412 күн бұрын
I just got that problem on my 2020 Jeep Gladiator Rubicon , started yesterday. 83,900km. The tradition continues. Thanks Stellantis.
@daphne628113 күн бұрын
I have a 2013 Chevy Malibu and this light just came on my car. Do you think I could drive my car until I can get it fixed next month? Thank you
@dzlfreek13 күн бұрын
@@daphne6281 absolutely
@NoneyaBusiness-it4qp16 күн бұрын
Does the negative side have to have the insulated plastic piece I hook it straight up to the side mount
@enchentez17 күн бұрын
The "redesign" version is a real POS SIX THOUSAND POUND TRIGGER WEIGHT 😂😂😂 IF you like this gun you need to get a Lasermax laser for the Colt Mustang, it fits perfectly on the original AMT Backup.
@meanpaintandbody18 күн бұрын
Go today u probably get 2 thin rolls and a 1/4 scuff pad for the same 25
@georgepoore384018 күн бұрын
spent 7 hours helping a friend with a Tesla . No spare tire , no wheel wrench and no jack . AAA refused to come , Private tow service wanted $1000 . He was lucky to find me .The tire was irreparable so off to the tire shop , then back to the car . Total driving time was 6 hours . Plus my American wrench didn't fit the lug bolts although Tesla was made in America . And cell phone service isn't available everywhere .
@ShawnColdren19 күн бұрын
Very helpful. I usually buy the side post that also has top post. In case I need to charge battery or jump start. I've always had an issue with the side post loosening. So thanks for the knowledge.
@DizTraveler21 күн бұрын
woohoo! Your still around! Happy return to the Tube de You!
@dzlfreek4 күн бұрын
Yes I am!
@garyriggins335421 күн бұрын
Welcome back. Its been forever since you posted anything .
@dzlfreek4 күн бұрын
ikr
@HenryRoss-wu4lo21 күн бұрын
💪💪💪
@agustinhidalgo40523 күн бұрын
Well at least you showed that it’s possible to put it backwards. Still though great video!
@sharonvrla6425 күн бұрын
Do you have a video on how to remove the factory terminal cables from the battery?
@SnickasBah26 күн бұрын
FML indeed. Thanks I learned a couple things.
@Daniel357blue4228 күн бұрын
How are they holding up after a year?
@dzlfreek28 күн бұрын
the rounds are holding up surprisingly well but the little square ones are starting to yellow. They all still work though. you get what you pay for and they were cheap.
@acecardhi29 күн бұрын
If your stihl runs out of petrol, its quicker to pull your sidearm to finish the cut.
@dzlfreek29 күн бұрын
you'll get no argument from me!
@jameshancock151529 күн бұрын
OMG I struggled for a month with different ideas. Until someone on a Jeep site suggested these Raybestos BC95064 Professional Grade Parking Brake Cable. Installed as if made for the jeep. Only $15 From Amazon
@carterkulakowski130729 күн бұрын
Would that down pipe fit my 95??
@daveshepherd8460Ай бұрын
Once you clear the codes a drive cycle must be done to bring the monitors back on line, if not done the cat monitor will not read, so you cannot tell if the problem has been corrected.
@JohnleefromthemistАй бұрын
cool vid man
@microhouse3000Ай бұрын
Great review. Loved the mushroom cloud 😂
@joshua99taАй бұрын
I finally find this after a longgggg time issue on my xj and wouldn’t ya know mopar no longer makes the connector
@hamsterman2008Ай бұрын
Thumbs Down on the drugs .
@dzlfreekАй бұрын
it was there when I arrived
@januarioqueiroz3122Ай бұрын
I feel compassion for all these loveable creatures, the donkeys ❤😊😊😊
@Elle.M.N.O.PАй бұрын
Fantastic, in-depth review. Im looking to purchase one of these for my dad so he doesn't have to haul a cooler and change out the ice on the road-trips he takes.
@TheTaylorfam1988Ай бұрын
Exactly what I am about to do. Thanks
@freeidaho-videosАй бұрын
Nicely Done!
@freeidaho-videosАй бұрын
Early on in the video you note that the 4 bolts into the uni-body were not strong enough for a bumper to mount to. But this bumper mounts the same way. What are your thoughts on this?
@dzlfreekАй бұрын
this should answer your question! kzbin.info/www/bejne/jXKQdJmNac9rqs0
@freeidaho-videosАй бұрын
@@dzlfreek That is what I did with mine. Good choice.
@momomo5002Ай бұрын
Grinding without eyepro is like doing a hooker without a rubber.😂
@tonetteoliver1515Ай бұрын
😂😂😂❤❤ thank you
@HockeyFan562 ай бұрын
What steering components did you use? Seems like an added benefit would be to get rid of the Y configuration that Cherokees use.
@mcplutt2 ай бұрын
Put a piece of wood between seat and brake pedal, and stop the brake line leaking 🙂
@hawndo792 ай бұрын
Awesome Video demonstrating presentation- Definitely getting one!!
@HootOwl5132 ай бұрын
80W-90 weight is good, but you should be clear, you want Service *GL-4* not GL-5 which has sulphur and other modifiers that will corrode the brass [or bronze] synchronizers in a SynchroMesh transmission. GL-5 is for Limited Slip differentials. [Positraction.]
@chrismarch66442 ай бұрын
GBR!!!
@deltacharlieecho47322 ай бұрын
Cool video. How did has the liner held up? I'm going to be doing a white bedliner on an 82 GS1100g frame, triple tree, and swingarm and I'm between the raptor and Custom Shop Custom Coat.
@dzlfreek2 ай бұрын
I don't own the jeep anymore but I still talk to the new owner (who drives it like a rental) and I gotta say, Im impressed with how well the liner has held up to the desert sun. Aside from the missing bumper caps and fender flares the paint looks good.
@RP48862 ай бұрын
4min he starts the actual video
@traceyweideman35122 ай бұрын
The building is located at Stine. It held the water that was pumped over the mountain to DeLamar Nevada
@traceyweideman35122 ай бұрын
That is a beaver dam..
@deanlazarus41812 ай бұрын
But 50% is better than nada. I've been there were ur @ several times.just went thru this stuff with ebay hei. Just gave up bought new hei to rule it out.
@charlierumsfeld66262 ай бұрын
Land of cheap shit!! 😁
@FiddlerOnTheRoof20242 ай бұрын
Shit Im glad Im not the only guy that burns his hands on shit JUST welded. Thanks for leaving that in.
@monstaro192 ай бұрын
I vacuum overnight sometimes or a few hours minimum like 4
@NoMissOutdoors2 ай бұрын
My xj runs at 210 always.... thinkin about a zj fan clutch upgrade..... thanks for the vid
@robertsprafke93762 ай бұрын
Thanks for the video. I always like quirky places like the cabins and driving through the desert. I’ve been traveling all my life. God bless.
@ivorywilly23522 ай бұрын
Awesome video! Careful about trusting Jack stands and nothing for backup. Guy local to me got crushed a few years ago and isn't with us anymore
@V8AmericanMuscleCar3 ай бұрын
Looks great! 👍
@RayGates-r9x3 ай бұрын
If you want to make things much easier, get the cans that are made for air horns for marine and sports use. It's r152a ( Difluoroethane). These cans have a threaded top self sealing valve. I'm not 100% sure if it's the right thread pitch to hook a r134a can tap/ charge hose directly to, but you could probably find a adapter if you dig around on the internet. This would be much easier than side tapping cans of air duster