Is it possible to convert a microswitch coin mech into an electronic coin mech? My old coin mech has two wires when I touch them together it gives me a play, I want to wire these into a modern digital coin mech not sure which wires would go where on the coin mech. Could you help?

Im new to the industry. I repair kiddie rides. This video was very helpful! Thank you!

On this unit I see Test and Service buttons on the jamma connector. Do either of those replicate the physical button on the unit?

Is there a way to keep it from automatically starting the first game if you don't touch it for a while? Mine always does that if I ignore it, and never goes back to the game browse screen unless I manually exit the game it started. Said another way, is there a setting that keeps it on the game browse screen until a game is manually selected?

I’m in a VRBO with a table top game unit. Somehow the system had the screen upside down making the table unplayable. Your simple explanation of pressing the test button during boot up is exactly what I needed to change the screen settings. I have 5 kids here for thanksgiving and you just saved the day. Thank you for making this video.

Nice I'm going to make one

Hi there, Ty for the video. I’ve tried adjusting the volume knob but my machine still doesn’t have sound. Any other ideas on a fix? Ty!

I want to know where you can download the software, and please don't say a google search because I don't want to search though thousands of dead links

thanks for help

Any suggestions on powering up a color vector game like Star Wars?

Big shout out to Will for making the video. This gave me the confidence to get after mine and get it working. I bought the Frank Lindenmuth board and servo package available at TNT amusements (search "TNT amusements" and "Sega’s FRANKENSTEIN head motor control board"). I agree with Mikeflorida7000 that you can do this completely from the topside of the playfield - one screw to remove the head, take the four screws out of the body, remove one the arms, and the body pulls up without any effort. From there the servo is a quick swap as in the video.

Thank you. Very helpful

How do I find this power supply

What gauge wire?

Clark Jeffrey Young Sarah Gonzalez Susan

Thanks

Thanks bro, the golden tee dedicated has a switch just inside the coin door not on the actual coin door mech (: I subbed, make some more vids I’ve learned a good bit from your vids!

This may be a stupid question , when you hooked up the power to the board you said the wires were flipped (red and black) . So when I hook it up to power supply is the red wire negative and black wire positive now ?

why are the ms pac dots hearts?

Man that looks crooked as hell lol

7:41

9:02 No, that is the AM bar antenna. The capacitor is below the board.

If p 1 button not working does it need to be programmed with ps2 controller

What software are you using? Is it Minipro for Linix?

I have this Special Force pinball machine…the kids love it unfortunately the right flipper is not working so it is sitting idle right now.

Great video! I recently replaced a flyback on my Tempest arcade machine (WG6100 monitor), along with many of the caps, diodes, and transistors on the high voltage board. But when I turned machine on, I got smoke from apparently the flyback, since no component on the board appears fried. Do you know how to use a multimeter to test the flyback so I can order another one if necessary? Thanks!

Nothing seems to be going down the left side at all. Is that normal?

Thanks bro for the help. I got my cruising world up and running 😁

Thank you !

Is there a way to mirror the screen on games for a 2 player cocktail arcade table? Like Street Fighter, or even X-Men?

Amazing how a lot of this info isn't in the manual or if it is I can't understand it. Also important. DO NOT connect power through the Jamma edge connector AND the 4 pin Molex port on the side AT THE SAME TIME. The board can be ruined (this info is in the manual). Thanks for the vid Will. I WILL be coming back to your instructions once I replace the old Jamma game board with the new Elf 750. I don't have the D, E or F buttons either so have to put them in first. PS AsteriX, not asterick 🙂.

I ordered a power supply to play the Mortal Kombat 4 arcade board on, they gave me the Game Elf instead

Could you tell me where do you find handles for a1980 battle zone game. Thanks

How do you get to options?

I have one these on a tabletop arcade machine. I believe I have the 750 games one. The games on the machine play absolutely terrible. Buggy, laggy and with serious audio glitches. What can I do to fix this?

Is nt pin 14 Vcc and pin 7 ground. Isn t PIN number one thr first input for OR gate?

how do i use a reader to grab the installer code for home scurity eeprom? they have me locked out of program mode & since im not using it monitored, they wont give it to me

I have an encoded control panel with USBs coming off the panel. I bought a splitter and hooked it into the USB port on the Blue Elf. I get nothing. Joystick dowsnt respond nor do the buttons. Does that mean i did something wrong or does the Elf not support this? Thoughts?

I can't seem to find the board/servo on the No Quarters Arcade site. Do you have a link?

Hey Will. Is the monitor display in this video set to portrait? I'm using the same convertor and would like my screen to be portrait instead of landscape, but that's not an adjustment in the monitor's settings. Can that be adjusted using the convertor?

I guess Part 2 never came out? I couldn’t seem to find it 😅

I got 853D and first thing i did with it, open it up and had a look inside :D

would this work for vehicles eeprom? If I wanted to put my vehicles Vin into a junkyard ECU?

hello Is there a way to read an encrypted memory? thank you 👍

How to code copy nuvoton N79E352RADG please help sir

Hi those wires coming from the conversion kit where do they lead to exactly.

What happens to sound if removed and changed from CRT

Is it supposed to move constantly even when the game isn’t being played?

This is nuts...mine started doing the same exact things last night. My caps look okay, and so do the header pins. Please let me know if this fixes it for you. I have a question about flash lamps. Hope you don't mind if I post it here: In diagnostic, beacon flasher 2R flashes with its group (1 additional playfield and 2 backbox inserts) as it should. Beacons 3R, 6R and 7R flash together independent of all the other flashers. They should each belong to different groups that each include 3playfield and 1 insert. During game-play, 2R flashes as it should, and the other beacons do nothing. I think maybe it was mis-wired at the factory? Thanks for your videos. They've been very helpful!

Krud Kutter works well.