How To Program A Game Elf {750 in 1}

  Рет қаралды 4,801

Will's Arcade Service

Will's Arcade Service

Күн бұрын

Пікірлер: 30
@JohnSmith-xp8dz
@JohnSmith-xp8dz 24 күн бұрын
I’m in a VRBO with a table top game unit. Somehow the system had the screen upside down making the table unplayable. Your simple explanation of pressing the test button during boot up is exactly what I needed to change the screen settings. I have 5 kids here for thanksgiving and you just saved the day. Thank you for making this video.
@rar6573
@rar6573 5 сағат бұрын
Is there a way to keep it from automatically starting the first game if you don't touch it for a while? Mine always does that if I ignore it, and never goes back to the game browse screen unless I manually exit the game it started. Said another way, is there a setting that keeps it on the game browse screen until a game is manually selected?
@geekyglamorous
@geekyglamorous Ай бұрын
Hi there, Ty for the video. I’ve tried adjusting the volume knob but my machine still doesn’t have sound. Any other ideas on a fix? Ty!
@AaronFriendandtheEnemies
@AaronFriendandtheEnemies 8 ай бұрын
Is there a way to mirror the screen on games for a 2 player cocktail arcade table? Like Street Fighter, or even X-Men?
@ELORIGINALDELASIERRA
@ELORIGINALDELASIERRA 6 ай бұрын
If p 1 button not working does it need to be programmed with ps2 controller
@jed2055
@jed2055 8 ай бұрын
Amazing how a lot of this info isn't in the manual or if it is I can't understand it. Also important. DO NOT connect power through the Jamma edge connector AND the 4 pin Molex port on the side AT THE SAME TIME. The board can be ruined (this info is in the manual). Thanks for the vid Will. I WILL be coming back to your instructions once I replace the old Jamma game board with the new Elf 750. I don't have the D, E or F buttons either so have to put them in first. PS AsteriX, not asterick 🙂.
@lmtliam
@lmtliam Жыл бұрын
Mine is Game Family, with a picture of a cartoon crab, and I don't get the "Press Test Button" message.
@crayapple1
@crayapple1 Жыл бұрын
Hi, I have an Elf 412 in one in an arcade machine but they did not install buttons D E or F :(........... is there any way of setting these setting without them? If not, how do I do a factory reset to default? I have changed some of the games to "Hardest" accidentally and cant get them back without the missing buttons! Your help would be greatly appreciated.
@willsarcadeservice4599
@willsarcadeservice4599 Жыл бұрын
Sadly you'd need to have the D, E, & F buttons in order to do a factory reset on the board. The only thing I can say could be done would be to either install D, E, & F buttons on your control panel or at the very least set up some momentary switches to the D, E, & F inputs but keep them on the inside of the cabinet so you can use them for factory reset or at least adjusting the settings for the game.
@bryansarracino8623
@bryansarracino8623 Жыл бұрын
I have the same question! Did you ever figure this out??
@bryansarracino8623
@bryansarracino8623 Жыл бұрын
How do you set up momentary switches if you dont mind me asking@@willsarcadeservice4599
@DaiVernonRIP
@DaiVernonRIP 10 ай бұрын
Connect a usb controller direct to board
@DaiVernonRIP
@DaiVernonRIP 10 ай бұрын
​@bryansarracino8623 i connected a ps5 controller to the usb port on mine, square is A, triangle is B, X is C, O Is D, L1 is E and R1 is F. Analog stick for navigation, D-pad doesn't work.
@rar6573
@rar6573 Жыл бұрын
Hello, @willsarcadeservice4599. Can you please tell me if Robotron (or Crazy Climber) plays correctly using dual joysticks? In other words, you normally play by using the Player 1 and Player 2 joysticks simultaneously on a 19-in-1 or Multi-Williams. Does the Game Elf support this?
@willsarcadeservice4599
@willsarcadeservice4599 Жыл бұрын
Yes it does, this game has Robotron and requires the use of both joysticks
@mattcaine9938
@mattcaine9938 10 ай бұрын
I have an encoded control panel with USBs coming off the panel. I bought a splitter and hooked it into the USB port on the Blue Elf. I get nothing. Joystick dowsnt respond nor do the buttons. Does that mean i did something wrong or does the Elf not support this? Thoughts?
@jed2055
@jed2055 8 ай бұрын
I'd bet this unit keeps it simple and the USB port is not a hub like on a Mac or Windows PC so one controller would be its limit but, happy to be corrected.
@joeyjalomo9716
@joeyjalomo9716 Жыл бұрын
I have a 750 in 1 have a problem with it everytime a game is played at game over the screen does not go to browse it stays on the same game that was played how can I adjust to fix this problem
@willsarcadeservice4599
@willsarcadeservice4599 Жыл бұрын
If I remember correctly you have to press the player 1 and 2 buttons at the same time, then a screen asking you if you'd like to leave the game should appear. Do you have the manual for the game?
@operationrestore3308
@operationrestore3308 Жыл бұрын
Would narc run on this hardware?
@willsarcadeservice4599
@willsarcadeservice4599 Жыл бұрын
After setting one up and actually playing the system I agree with you. It has major flaws and issues that could cause a person to have a heart attack or get grey hair way before they should.
@tom11zz884
@tom11zz884 10 ай бұрын
I have one these on a tabletop arcade machine. I believe I have the 750 games one. The games on the machine play absolutely terrible. Buggy, laggy and with serious audio glitches. What can I do to fix this?
@ELORIGINALDELASIERRA
@ELORIGINALDELASIERRA 6 ай бұрын
Did you find a fix
@joemama5421
@joemama5421 Жыл бұрын
I’m sure this is obvious, but I just want to be certain…there’s a particular game that I plan on having it set on single game mode for…will it appear just like the original cabinet would if I set the machine on single mode? Like will it show the small snippet of gameplay or the title screen and play the game’s music before I press the P1 start button? I just want to make sure it behaves like the original game when set on single game mode… thanks in advance!
@willsarcadeservice4599
@willsarcadeservice4599 Жыл бұрын
I never made a video on that topic, but sadly it won't it shows just like you see in the video. I had a customer want to do the same thing and when I tried it it still gives the game list but with only a singular game to choose from.
@Oli-kg6wq
@Oli-kg6wq Жыл бұрын
is there a way to add your own games?
@willsarcadeservice4599
@willsarcadeservice4599 Жыл бұрын
Sadly not for this set up that I'm aware of. You'd want to use a PI System to do that.
@ТемаБармашов
@ТемаБармашов Жыл бұрын
what size monitor?
@willsarcadeservice4599
@willsarcadeservice4599 Жыл бұрын
This particular monitor is a 19" LCD, I don't remember the Ratio sadly
@mortalkombatarcadelover4479
@mortalkombatarcadelover4479 9 ай бұрын
I ordered a power supply to play the Mortal Kombat 4 arcade board on, they gave me the Game Elf instead
RiddledTV's 2Way Jamma Switcher
11:17
Scarlet Sprites
Рет қаралды 5 М.
VIP ACCESS
00:47
Natan por Aí
Рет қаралды 30 МЛН
Don’t Choose The Wrong Box 😱
00:41
Topper Guild
Рет қаралды 62 МЛН
Understanding Logic Probes & Logic Gates {A Basic Look}
1:22:00
Will's Arcade Service
Рет қаралды 1,5 М.
GAME ELF 412-IN-1 MULTICADE FULL GAME LIST AND GAMEPLAY
5:37
Pacscalator Arcade
Рет қаралды 3,1 М.
Arcade Repair Tips - Removing And Installing A Monitor Chassis
7:30
Arcade Repair Tips
Рет қаралды 36 М.
Street Fighter II Complete Restoration with The 8-Bit Guy
18:10
Time Rift Arcade
Рет қаралды 483 М.
How To Replace A Flyback & H.O.T. {Wells Gardner K7000}
50:48
Will's Arcade Service
Рет қаралды 548
Is this the Pandora's Box Killer?
9:48
Retro Ralph
Рет қаралды 6 М.
How to wire the jamma 619 in 1 pcb - Pandora's Box
16:53
Master of None
Рет қаралды 88 М.
Game Elf 621 in 1 review and setup
7:01
Stephen Spil
Рет қаралды 15 М.