THANK YOU!

@Detroit-Berlin - what is the major difference between Adam s3h vs. those classic JBL monitors (looked to me like those used for Michael Jackson's Thriller production :))

An awesome but slightly confusing module. Thanks for going into a decent level of detail.

I never buy tools with rubber handles because they will be sticky after some years ... In Sweden we call it T-röd and it consists of 50-75% Ethanol, 10-15% 2-Propanol, 5-7.5% Butanone and 1-2.5% Acetone.

Simpler is often better. Good video, thank you.

I swapt them for PSI . More detail .

Great video thx ! I have the ADI 2 pro fs r . But there is non routing for the outboard gear and monitoring video no where to be found . :)

Saying WD-40 is as saying "use a fluid", there are several different WD40 types of lubricants

Thanks for the video. Methylated Spirits worked for me. Merry Christmas from Australia.

A sub from me is a no-brainer , i learn from the best , i learn from YOU ! 😃👍

(In Australia one will fired from their job or talking talk about two sticky things don't match. In kindergarten and primary schools they teach the children that not only are the two sticky ones do stick, that sticking these together is more than fine and actually encourage it. This would of come from part of the Australian Rockefeller learning agenda programming approved by our Government Ministers who actually mislead the people. Laws have been changed in Australia so that children over the age of my 11 can go to their doctor without their parents and be prescribed hormone medication to physically assist with their transition. If one google images David Rockerfeller with wife Happy, I believe Happy is a very masculine lady , are these two sticky stickn 🤢🤮) ( Thank you, great vide🥇🙏)

Petrol is faster and better i have tried all the others petrol is my number 1 solution.

Could you demonstrate a mastering session with it please?

Treedt ge toevallig ergens op in de komende weken?

Great, really

Very interesting, thank you.

Hi , thanks for this review. Do you think the adi 2 fs will work with an old rme babyface (blue model)?

Really useless He talks and talks and talks but does NOT show how to patch thus making it all useless

Goo Gone is a citrus-based adhesive remover for sticky residue from things like tape, stickers, and gum. It can also remove certain stains like crayon marks from walls or floors. Also you may try any other sticker remover.

Sound great. Is it too much of a "tube mess" if I use it after SPL MK3 Vitalizer that has also tubes in it and after Drawmer 1974 EQ (I use Drawmer just 1db, 2 max on a master bus) for the final EQ boost of the whole mix? I really like the sound, but the SPL Vitalizer already gives so much vibe and "EQ warmth and silk" - I'm afraid is going to be too much; yet I want to boost it more than just 1 or 2db (with Tegeler EQP1) at the end before going to VCA SSL style compressor? I make mostly EDM, pop music.

If I was falling I’d grab the perkons to save ‘it’ not myself! 😂

I love that sizzle.

Exec summary: I tried this on my old Keith McMillen Qunexus case and it worked really well! I bought a Qunexus in 2013, and after being kept in a drawer, found it had gone sticky in 2020. Got a replacement case from KM and had a go at the first case with Goo Gone, label remover spray, and isopropyl alcohol. Nothing shifted, but it left an even worse mess. I put it all in a bag. In the UK, the purple/blue alcohol is called methylated spirits: it's cheap and easily available. After a few wipes with some meths-soaked kitchen towel, it started shifting and after 20-30 minutes the sticky goo is all but gone - visually there may still be some residue, but I can't feel it. The underlying plastic is cosmetically fine, the lettering/legends on the top of the case are unaffected. The bar code on the bottom is a bit degraded. The rubber feet stayed on. Many thanks to @Detroit-Berlin that made my day. The replacement case is starting to get a bit sticky now...

Thanks. I found this is the best for softening the sticky gunge that has appeared on my Dell laptop palm-rest. I tried isopropyl alcohol and commercial cleaners but denatured alcohol (ethanol) worked best by far, although it's not easy to get here in the UK. The softened gunge still needs scraped off but it's not as arduous as it was after using other solvents.

retrobrighting works best tbh

I love your systems I'm happy for you and I thank you for your effort to educate us :)

Will denatured alcohol strip off the paint graphics too? Want to use on Akai MPC Live2 and save all graphics. What's the best solution to use?

WOW

Hello good man. I want to ask you. I'm in a dilemma right now. I have the following equipment. Yamaha MG10XU Mixer, 2 HS8 Monitors + HS8S Subwoofer, MSI-Vector Laptop with 13gen Intel core i9 13980hx, +Thunderboot 4 output, I think the graphics card doesn't matter as well as the SSD, the chipset itself. I am considering the purchase of a DAC and settled on the RME ADI-2 Pro FS. I'm hesitating about what interface to get to improve the sound. I mainly use my studio for guitar recordings and listening to quality music. What would you advise me about DAC and is it worth investing in? Or just get a good audio interface. Thank you very much!

Hmmm I have a XL

Nice video. If you find a nice patch, you can always take a photo of it with your mobile.

I don't understand, what does it mean if the sound is phase and Out of phase would sound the same if one of my headphones had the polarity reversed.

This helped me confirm that my ground loop isolator indeed flips phase. If anyone is curious I used a plugin called A1StereoControl-x64 along with equalizer apo to flip my phase to the correct phase. That's in case you are looking for a no cost way to fix phase issues.

Thanks for the video. I would have liked to see your technique for cleaning the knobs.

just ordered it online cause i can't find it locally, hopefully it will work!

Love this video ❣

useless blabbering!

I will never again buy anything coated with rubber after my experience with a Radio Shack emergency radio which was not needed to be used for years and then when needed, a sticky mess! I first used straight white vinegar on a paper towel which worked a little but not enough, so then used hand sanitizer which is 66% alcohol on a very soft old cloth, that worked well and much faster. I would have finished with silicone or Armor All but didn't have it so put a little WD40 on the cloth and wiped the radio. During this process no black stuff came off on the rag but the sticky came off. Looks and feels fine now ... but will the rubber continue to degrade?

It basicaly sounds like weird phaser delay and sings. but no videos manage to showcase this sounds.

Thanks for introducing me to this thing. I have the black and yellow wasp on the way. Nice!

@7:20, I think having zero volts killing the output provides a very simple way to create rests in the sequence.

Cloth works far better than paper.

Ten minutes too long.

I love my VTC! After 2h in use -> warmup it do something magic with the material.

I used label remover I got from maplin few years ago on my headphones this spray is for sticky stuff I spray a cloth and went to work on these headphones and yer it took it straight off I had to work at it / it’s now like the sticky crap was not on there in the first place nice a smooth this was plastic and I no what went sticky it’s lacquer from when there new saying that these were new in the package it was the hot summers we have had over the years I had new radios walkie talkies do the same and way label remover did it easy and these headphones were very sticky

A-137-1 or A-137-2? Which do you like best?

Thank you very much!! I had a white Nintendo GameCube controller that had some yellowing...but not anymore!!! 😊😊😊

I have this + wmd synchrodyne + expander for latter, so a lot of potential fun!