Broooo, go with react spindle in the front to keep your track width!!!
@claytonhatle.19884 күн бұрын
I’ve heard that these bel tech ones widen it do you know how much?
@miltongonzalez87264 күн бұрын
@@claytonhatle.1988I read .45" per side and if you're going to bag it, that's a lot. I recommend the Stonefab narrow control arms to narrow the width 1.5" per side and add the react drop spindle to keep the track width.
@javy2951288911 күн бұрын
Ac?
@rustycheek471416 күн бұрын
What transmission are you running?
@clinteast747620 күн бұрын
Why do this???
@claytonhatle.198820 күн бұрын
@@clinteast7476 I’m 6’4 and it gives me more leg room and doesn’t have my head bouncing off the roof
@erickalvarado821127 күн бұрын
Hey I’m doing a gen v on my jeep and need to do that to, can you share the links of everything
@claytonhatle.198826 күн бұрын
@@erickalvarado8211 I’ll try to look it all up, my buddy owns a performance shop local to me so I just went there and grabbed it all.
@maikolrodriquezАй бұрын
Hell yeah! Can't wait to see the battery relocation vids :)
@obslife1985Ай бұрын
Trucks definitely going to look a lot different once u get all that done but Im sure it’s going to be a neck breaker !!!
@claytonhatle.1988Ай бұрын
@@obslife1985 sure hope so I’m overly excited
@Mr_JingleАй бұрын
just found your channel love your obs and content🔥
@claytonhatle.1988Ай бұрын
@@Mr_Jingle appreciate it man! Thanks for watching, there’s going to be some really cool videos coming soon
@rtrottier14Ай бұрын
Are you running a cruise control on it? does the air conn have to link into the harness at all or is it an independant system?
@claytonhatle.1988Ай бұрын
@@rtrottier14 haven’t done cruise or ac yet, although for the ac I’ll run a factory l84 compressor and it will work that way and the harness is a psi harness you have to spec it out for anything you do or don’t want.
@tliebelt13Ай бұрын
Stock ecu?
@claytonhatle.1988Ай бұрын
@@tliebelt13 sure is, had things tuned out like vats and what bot
@IWillBeatYourAssАй бұрын
"OBS"? i thought it was "OSB" lol
@rangel.90Ай бұрын
Size for the smaller vent hoses on coolant tank?
@rangel.90Ай бұрын
Do you remember the ID size to upper and lower coolant tank hoses?
@gabrielvillasenor8890Ай бұрын
Did you have to adjust the brake pedal so it wouldn’t hit?
@claytonhatle.1988Ай бұрын
@@gabrielvillasenor8890 the e brake pedal yes
@gabrielvillasenor8890Ай бұрын
Thank you !
@WesleyPowers-ce1ej2 ай бұрын
Where did you get floor mats?
@claytonhatle.19882 ай бұрын
They came with the truck but you can find them on ebay
@jtpalmer12252 ай бұрын
What about shifter linksge did you buy something or make your own?
@claytonhatle.19882 ай бұрын
Factory shifter linkage. With the factory bracket off the 700r4 put onto the 6l90
@DannySantellano-kv9up2 ай бұрын
Thank you for showing inside the engine bay the other videos I watched didnt show that part! Great job 🙏☮️🇺🇸
@claytonhatle.19882 ай бұрын
No problem man, I try to go in depth to explain things best I can. Appreciate it!
@marksayler6232 ай бұрын
What did you do for power steering lines?
@claytonhatle.19882 ай бұрын
I used a c6 vette pump and my buddy made me a reservoir. Using all -6an lines
@IslandBoy9582 ай бұрын
Your truck your choice, looks great
@claytonhatle.19882 ай бұрын
Thanks man
@billetfabrications3 ай бұрын
Hey question where did you get the piece for that screen i have a 1990 c1500 I plan on putting a l83 in it
@claytonhatle.19883 ай бұрын
I’m sorry what screen?
@billetfabrications3 ай бұрын
@@claytonhatle.1988 mb what I meant was your double din piece
@billetfabrications3 ай бұрын
But I think I found it on Amazon it’s all good
@claytonhatle.19883 ай бұрын
@@billetfabrications my bad man
@billetfabrications3 ай бұрын
@@claytonhatle.1988 nah it’s all good I subbed up tho It’s cool we kinda have similar build goin on I’m supposed to be getting my truck running by July finally
@hotrodrichie28923 ай бұрын
Hey man I have a question I have a similar setup I have a 2007 ly6 engine and a 2015 6l90 in a obs But it don’t want to go out of first gear anything you would recommend?
@claytonhatle.19883 ай бұрын
Did you get the ecm and tcm married together?
@hotrodrichie28923 ай бұрын
I have not I don’t know how to do that sorry if I sound dumb I’m new to this any way you can give me information on how to get the ecm and tcm married together?
@claytonhatle.19883 ай бұрын
@@hotrodrichie2892 no worries man not dumb at all, we all have stuff to learn. And you have to have special software. I’d start calling some shops in your area to see if they are able to do that. Most dealerships won’t since it’s “custom” they don’t want to be liable. But I’m guessing that’s your issue the ecm isn’t talking to the tcm telling it to shift.
@hotrodrichie28923 ай бұрын
Man I appreciate you thank you so much for taking time to respond When I call the shops around me ask them can they get the ecm married to the tcm ?
@claytonhatle.19883 ай бұрын
@@hotrodrichie2892 no problem man happy to help, and I’d just tell them the motor is a 2006 and the trans is a 2015 if they can flash them to get them married together. Different shops call it different things but if you explain the situation they will understand.
@brandonsharp33833 ай бұрын
You need a 250r
@billetfabrications3 ай бұрын
What trans do you got in it my man
@claytonhatle.19882 ай бұрын
6l80e
@Big_Chief_903 ай бұрын
Ayee Bro?! Where did you get your gear shift? I seen one other like it but he didn't list where he got it from. I've been wanting to get one for my ride.
@claytonhatle.19882 ай бұрын
Sorry about just seeing this man, I got it from az pro performance
@ponchoissean3 ай бұрын
Anything crazy need to be done with the computer?
@claytonhatle.19883 ай бұрын
Vats deleted and couple other things turned off and on
@martinezjuan93233 ай бұрын
Question so you got a harness to do the delete or did you have open engine and do kit?
@PartnersinCrimeLLC3 ай бұрын
What stock driveshaft were you using before?
@claytonhatle.19882 ай бұрын
It was a custom made one just wasn’t made for piwer
@jordanmartel21153 ай бұрын
not good alignement like mine ...
@claytonhatle.19883 ай бұрын
Yup got it aligned and it was good
@billycooper98793 ай бұрын
What kind of long tube headers are you using or do you have shorties?
@claytonhatle.19882 ай бұрын
Long tube c10 swap headers from speed engineering
@tavarisphillips89873 ай бұрын
The old rear end was a 10 bolt 8.5?
@claytonhatle.19883 ай бұрын
Still is I just got done doing a gear change to 3:73, a posi, and quick performance axels
@tavarisphillips89873 ай бұрын
Nice where did you get your axels?and Yukon carrier and gears?
@claytonhatle.19883 ай бұрын
@@tavarisphillips8987 got the axels from quick performance and yes both Yukon
@tavarisphillips89873 ай бұрын
Got an 88 myself. How much hp can the stock axels hold?
@claytonhatle.19883 ай бұрын
@@tavarisphillips8987 can never tell for sure Ik people that brake them on 300hp and Ik people with 0 issues with 500hp. How much beating will it see and can it hook?
@MiguelMadrigal-nj7vq3 ай бұрын
Do you move the water pump ?
@claytonhatle.19882 ай бұрын
No it’s stock location
@MiguelMadrigal-nj7vq3 ай бұрын
Do you move the water pump ?
@claytonhatle.19883 ай бұрын
I did not move the water pump
@MiguelMadrigal-nj7vq3 ай бұрын
Do you move the water pump ?
@coolkid67513 ай бұрын
Noob question but how’d you get around the afm dod? Considering doing a gen 3 swap over the gen 5 because of it.
@claytonhatle.19883 ай бұрын
Easy cheap way is you can just disable it with hp tuners (which I did that for the first 2k miles of the swap then I did a cam and did the better way which is cam, dod plugs, and new non dod liftersz
@JimJones-pl5sr4 ай бұрын
What holes on ict billet plate did you mount the motor mounts,
@Alto_chris4 ай бұрын
What engine harness are you using ?? And how are you running it with a manual ?
@claytonhatle.19884 ай бұрын
I’m using the psi conversion swap harness and my trans is a 6speed auto
@obslife19854 ай бұрын
I’ve had to order at least 20 of those over the years from hitting possums to raccoons at night lol I always keep at least two on standby!!! When you’re at a 5/7 drop u have to replace these all the time 😂
@claytonhatle.19884 ай бұрын
😂I got another new one sitting on the shelf just waiting for me to hit something lol
@NoMonkeyBizz4 ай бұрын
I got a 88 silverado c3500 will that quick release work?
@claytonhatle.19884 ай бұрын
This one isn’t a quick release just an adapter and as long as it’s the 88-94 style it will work
@leealanis99414 ай бұрын
Now just make sure to replace with a led flasher relay from oreilly so they don’t blink so fast! They’ll flash a slower more normal speed!
@claytonhatle.19884 ай бұрын
Was going to buy resistors but I will look into this fs
@leealanis99414 ай бұрын
Been there done that!!! Life saver once I saw they made these! Little tight to get too under dash about middle of it… just turn ur blinker on and feel for the one clacking and pull and replace I never looked back again!
@normanfab41784 ай бұрын
Any fitment issues with those headers? I've got a lt swapped k1500 and I thought about using those
@claytonhatle.19884 ай бұрын
The passenger side sits the frame rail a little so you have to dent up the header a little or grind down the frame
@DocZoidberg5494 ай бұрын
You forgot about the 99 Surburban.
@VON-924 ай бұрын
Did you have to notch the frame where the lower A/C compressor is?
@claytonhatle.19884 ай бұрын
I did not the frame for the ac compressor but there are kits out there now so that you don’t have too
@VON-924 ай бұрын
@@claytonhatle.1988 do you know the name of the companies
@claytonhatle.19884 ай бұрын
@@VON-92 CVF and Holley I do believe
@VON-924 ай бұрын
@@claytonhatle.1988 will the A/C compressor be on the top or bottom? I see DIRTY DINGO has a kit but I would like to get the A/C low. I may just have to find someone who can notch the frame
@claytonhatle.19884 ай бұрын
@@VON-92 not hung the from is the way to get it low I think all the other ones are more mid mounted or up on top
@olp8524 ай бұрын
Thanks for making a simple easy to understand video.
@Always_SODIUM5 ай бұрын
What size socket for the shackles?
@enriquesanchez77475 ай бұрын
Would it hook up to my 91 Cheyenne 5 speed?
@thabigghomie_5 ай бұрын
Thanks nice
@johnkirkjr44485 ай бұрын
Did u have any issues spring hitting bed rail
@claytonhatle.19885 ай бұрын
No issues there I had it on my short box it was because my leaf springs were wore out
@twitchClipUploads5 ай бұрын
Is it pretty similar for a gen4 4l80 swapped in?
@claytonhatle.19885 ай бұрын
Yes a lot alike but that swap is a little easier
@twitchClipUploads5 ай бұрын
@@claytonhatle.1988 shit sorry man I realized I mistyped I meant a 6l80* still similar?
@claytonhatle.19885 ай бұрын
@@twitchClipUploads all good bro ans yea it’s still pretty much the same but a little easier. Gen4 motors are just easier to deal with than gen5
@twitchClipUploads5 ай бұрын
@@claytonhatle.1988 cool man thanks for the reply. Nice truck ass well.