10 ай бұрын
11 ай бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
Пікірлер
@kerrykc1 2 күн бұрын
Nice.
@jamesstumpf75 14 күн бұрын
Wow, you managed to film yourself plowing your entire driveway without one showing us how it actually operates. Nice.😊
@3480eric 18 күн бұрын
I'm going to have to this on my 18 year old TL. I liked your approach to removing the mount without removing the radiator fan. I'm going to try it your way first if I can't get it out, then will remove the fan. I will also use the OEM version to start with even though it's triple the aftermarket cost. Don't want to do this twice. Great video, thanks for the tips & trjcks!
@thelonewolf666 18 күн бұрын
put them in a jig
@malx7756 21 күн бұрын
Thank you!
@jameswaters3599 27 күн бұрын
Glad to know it can be done on the ground. Thanks for the video!
@jameswaters3599 26 күн бұрын
Just did it today. It took maybe 20 min because I was being cautious.
@nedkent5239 Ай бұрын
Those brackets bend so easy! I have had my friend reweld them twice already from light home use.
@McGo101 Ай бұрын
@@nedkent5239 yea they do! I've since been using this plow blade on a compact tractor and they are bent everywhere now haha
@california_valley Ай бұрын
Hey G. What’s the name of the part you removed to place the Bluetooth. Thanks 🙏
@lotuboliba Ай бұрын
Do you need to change the true to now tire?
@McGo101 Ай бұрын
Nope
@unpredctable-dn8bu Ай бұрын
How many miles did the original belt last ?
@McGo101 Ай бұрын
Car had 100k on it when I got it. So not sure if it was the second or third belt put on the car.
@biga3586 Ай бұрын
Will the 15 pound blue rhino work?
@CrisCord-vv4bp Ай бұрын
Nice
@christianc.822 2 ай бұрын
Is this the Massey Ferguson 1526 ? Great video btw!
@McGo101 2 ай бұрын
Gc1720 model :)
@John8910 2 ай бұрын
2 questions. Did it ride better after the new struts? How are the struts holding up now after months of use? Still riding and handles good? Thanks.
@McGo101 2 ай бұрын
Yep struts worked very well and they restored stock ride height.
@HotRodTodds 3 ай бұрын
Did you replace the chain or just the assiting parts? I have a 17 with the exact same issue
@McGo101 3 ай бұрын
On my 2011 I replaced tc, "updated" guides, phaser, oil pump, water pump ect. Been good the last 5 years or so
@HotRodTodds 3 ай бұрын
@@McGo101 Did yours only make the noise when the truck was cold? Mine will do it but once I turn the truck off and go again the noise pretty much goes away.
@McGo101 3 ай бұрын
@HotRodTodds mine only made the noise when in mds and off the throttle. Iirc it would do it warm or cold just had to be in 4 cyl mode
@JF-e8y 3 ай бұрын
Do you have a BW44-11 Transfercase? Thank you for the video!
@McGo101 3 ай бұрын
Not sure which tc i have, I've never looked it up
@JF-e8y 3 ай бұрын
can you add the repair video or where can I find it, please?
@McGo101 3 ай бұрын
kzbin.info/www/bejne/oYSsY2Npm9J6p7s
@DavidKarl-i9v 3 ай бұрын
So i have replaced the whole timing chain kit, with the cam phaser, all solenoids etc..i still have the ticking while coasting...when i put it in manual, it goes away, its a 2018 Durango
@McGo101 3 ай бұрын
Hmm I'm guessing the Durango has the hemi as well. Did the tc kit include new chain and guides?
@DavidKarl-i9v 3 ай бұрын
@@McGo101yes, it did, i changed everything including the vvt sprocket. also i hear a ticking nois, when in 4 cyl mode, in 8 cyl, i dont bear anything.
@DavidKarl-i9v 3 ай бұрын
@@McGo101yes, it is a 5.7 hemi
@mikeoleyn3288 3 ай бұрын
I had a pain making sure it was going in lol. Very uneasy feeling making sure it actually goes in the gear box
@McGo101 3 ай бұрын
@@mikeoleyn3288 haha thats fair. Not something we wanna mess up on
@johnforsyth8414 3 ай бұрын
I watched another video where the sway bar bushings came with a lubricant. I would assume a silicone based lubricant. He put it around the bar. Then between the bushing and the bracket. I believe they’re supposed to work better that way.
@nkxaykeo 3 ай бұрын
I did allyou said but my screen dosent turn on still lblack screen ?
@McGo101 3 ай бұрын
This fix only applies if your screen says disc unformatted or disc read error. If your screen is black and won't turn on I would look at replacing the whole navigation unit with a good used one. Gl
@georgewkush4511 3 ай бұрын
Just got a 2015 ram 1500 with 160,000 miles and it makes this noise. Will this cause problems or is it more of an inconvenient noise?
@michaellimon2316 4 ай бұрын
Hey buddy are you in California, Ontario?
@McGo101 4 ай бұрын
Nah
@ryanlayne3569 4 ай бұрын
7years on and you are stihl a big help. Thanks
@justindaniels17 4 ай бұрын
My 04 Grand Cherokee 4.7 makes the exact same noise on the passenger side only and the driver side is quiet ,but it only does it when the engine is cold this happened when after i ran out of fuel once while leaving the parking so idk what it could be
@galyien 4 ай бұрын
Every one talking about how long they owned their FS 56 , ive been running mine 20 years strong and just now been having issues with my spark arrester
@Edfoley2025 4 ай бұрын
Who takes care of warranty if needed for replacement or repairs? You or plumber? That's the question i have.
@McGo101 4 ай бұрын
For water heater issues I would deal with the manufacturer or home depot, unless it was installed incorrectly then it would be up to the plumber to fix
@bwzboddah5219 5 ай бұрын
I will be forever indebted to the great mechanics and teachers KZbin has provided through the years -- hope your recovery from heart surgery has gone well
@jessebrown7544 5 ай бұрын
What did end up bring for u? I have a 09 thats doing the exact samething just did manifolds like a year ago.
@McGo101 5 ай бұрын
I had 2 do my manifolds twice in a 100k but my tapping noise while in eco mode required a full timing job to repair
@jessebrown7544 5 ай бұрын
Did u do a cam to? While you were there
@McGo101 5 ай бұрын
@jessebrown7544 nah didn't have to go that far. Just timing chain, guides, phaser, oil pump, water pump ect
@jessebrown7544 5 ай бұрын
I was just curious I've notice other things like when MDS kicks in at 60 mph it shifts weird like lack of power. Shift over into manual mode it drives fine. I was wondering, tho bc im 174,000 miles on stock cam so far
@McGo101 5 ай бұрын
Mds is guna shift wierd running on 4 cylinders where as manual mode keeps in running on 8. Mine definitely has a delay while in eco as well. As far as cam and lifters go, imo if your hemi isn't misfiring or doesn't have loud tapping noises at idle I'd just send it. Keep good oil in her and don't let it idle excessively.
@vicn4059 5 ай бұрын
Hi, mine is 2004 Lexus rx330 but it has the issue with not ejecting the dvd disc and now after seen your video it tells me I might as well try and check mine too. How did you guide the disc manually to eject it again. Could you kindly explain how exactly you did it, kinda lost in there? Thanks much.
@zedcartwright3037 5 ай бұрын
Yesterday I installed this new fuel pump on upside down since it had RH stamped on the backside and the directional gas flow arrows pointed toward the gas tank instead of the carburetor when it was mounted in the original spot on the left hand side of this Gravely Kawasaki motor. Apparently, they have left hand side pumps and right side mount pumps. Aftermarket Ebay pump listed numerous models it could fit. So, they sent me a Right-Hand pump instead of the original Left- Hand pump for my model. Other than that, the pump was identical as the original one in shape size and port positions. Turning it upside down the gas flow arrows were then pointed toward the carburetor and I only had to extend the pump vacuum hose up to the topside of the pump to the vacuum port. I took a piece of small copper tubing off a junk air conditioner that was already partially shaped in a U shape. Carefully bent it further over without a major crease to connect it to the extended hose coming from below with another small piece of hose connected to the port end to prevent kinking. Motor cranked right up, and I cut half an acre. Good thing I noticed those gas flow arrows on the back or I would have put it on backwards. No instructions came with it. You have to watch what you buy on the net.
@zedcartwright3037 5 ай бұрын
I just bought a new Kawasaki pump for $10 on Ebay and went to put it on and saw that there were gas directional arrows on the backside of the pump coming from the fuel tank port to the carb port. If I put the pump on with the vent line down my gas flow would be running in the wrong direction according to the arrows. So went to KZbin to check it out and saw your video. When you said at first you thought the pump went on in the opposite direction, but it went on the other way round then I realized I just needed to turn the pump around and attach it in the right direction. Then the arrows were on the front side of the pump and gas flow was correct. I thought maybe they had sent me a right- hand pump since RH was stamped on it and this pump is mounted on the left side of the engine. It would work turned in the opposite direction if I mounted it with the vent line upwards and bought a piece of hose to extend the vent line to the top. But all I needed was to turn the pump over and mount it. Thanks.
@zedcartwright3037 5 ай бұрын
I commented before going out to put the pump on. Apparently, this aftermarket pump is a right-hand pump or one that is mounted on the right side of the engine so when it is put on the right side of the engine, the vent vacuum line will be facing down and the directional gas flow arrows will be in the right direction from the tank port to the carb port. I tried mounting it on the left side of the engine turned around and it will not mount without shimming it out and using longer screws. The original pump looks like this one and when I put the new one over it the ports are in perfect alignment with the old one and the filter circle is to the outside like it is on the old one. Unless these directional arrows are wrong, I will have to mount it upside down with the vent vacuum side up and extend the vent hose from the bottom to the top side of the pump to attach it to the vacuum port.
@McGo101 5 ай бұрын
I just replaced one on my Kubota that has the same set up, should be a direct fit replacement in the same spot with same orientation.
@zedcartwright3037 5 ай бұрын
@@McGo101 This pump is exactly the same as the original but if mounted on the left side of the motor as the original is the gas flow arrow from the tank side port is pointing toward the tank and the arrow going to the carb port. is pointing away from the carb toward the tank. The original does not have the arrows but these arrows should indicate gas flow direction. So, although this pump mounted in the same place is exactly like the original with the vacuum port facing down and a port to the left toward the tank and a port to the right going to the carb the gas flow arrows are backward. RH is stamped into the plastic which I assume means it is a pump meant to be mounted on the right side of the motor as I guess some are. I needed a LH pump. If I put the pump against the right side of the motor with the vacuum port down then the gas flow arrows are pointing in the right direction. So, this is a Right Hand pump orientated for right side of motor mounting. It will work on the left hand side if I turn the pump upside down with the vacuum port facing up and the arrows facing toward the carb Then connect a sleave to the vacuum line with a short piece of hose extended to the top of the pump to the vacuum port. Probably take some small copper tubing and bend it in a U shape so the top of the hose can be connected to another short hose to get the bend without kinking it.
@johnsn10 5 ай бұрын
My ram has a 35mm sway bar but they only sell 34mm or 36mm bushings so not sure which ones to get
@McGo101 5 ай бұрын
That I'm not sure about. Iirc I just ordered mine from rockauto and they seemed to do ok 👍
@johnforsyth8414 3 ай бұрын
@@johnsn10 Have you checked the diameter of the swaybar with a pair of dial calipers? I have a 2015 ram 1500 big horn. Mine came out at 36.5 mm (or 1.437 “). I ordered the 36 mm bushings. They are going on next weekend.
@tonymeehan7859 5 ай бұрын
my daughters radio wont load, nav error. gonna give it a go
@devinnewell5842 5 ай бұрын
Fu***n nailed it buddy
@daveengstrom9250 5 ай бұрын
I wouldn't have known to look there for the problem.
@rickpauline3091 6 ай бұрын
Took less than 10 mins and it worked, thanks!!!!
@McGo101 6 ай бұрын
Happy I could help!
@rickpauline3091 6 ай бұрын
@@McGo101 You did more than help. My wife (it's her machine) was ready to run out and buy a new one. I told here there's this thing called the internet. Give me 1/2 hour. so she thanks you as well. :)
@McGo101 6 ай бұрын
@rickpauline3091 no worries guys! My machine was almost new when I had the same problem so after looking it up I thought why not make a video about it :)
@truejey7475 6 ай бұрын
thank you what size is your rear spacers? are they 20mm?
@McGo101 6 ай бұрын
I believe they are 25mm or 1 inch spacers.
@Simpinski 6 ай бұрын
Hey man was wondering if you got any updates?
@McGo101 6 ай бұрын
Tapping noise has been great since using pennzoil ultra platinum 5w20 and oem filter. Other stuff is showing its age tho 😄
@Simpinski 6 ай бұрын
@@McGo101 A couple weeks back started hearing similar inconsistent tapping while cold then i dont hear it once its warm. Changed oil to pennzoil plat hm 5w20, still there. This link is a video i took of it one morning. kzbin.infox1llJsjGVAc?si=HNJN7dxlYW-NMnCp
@Simpinski 6 ай бұрын
@@McGo101 a couple weeks back started hearing similar inconsistent tapping while cold, doesnt seem to stay once warm. Changed oil to pennzoil plat hm 5w20 but still there. I have a short of it on my channel. Just dont know what it is and it got me worried
@McGo101 6 ай бұрын
@Simpinski I'm guessing you checked for broken manifold bolts? I've had to do mine twice in 100k. Taps when cold when they break
@Simpinski 6 ай бұрын
@@McGo101 by the way my car is a challenger not a ram. And i have briefly checked the side heatshields towards the back for any movement since that apparently is a good sign the bolts are broken, but they seemed to be in place. I havent done any deep diagnostics since i have much less room than the rams.
@ryanv7195 6 ай бұрын
What's the axle nut size?
@matt9741 5 ай бұрын
36mm socket, some say theirs is 35 on the same truck so might try to have both handy. I don’t know on thread pitch, but no stores had them handy. Had to buy an axle to get the nut. Lol
@ryanv7195 5 ай бұрын
@matt9741 I recently did my repair. Both my cv axles were replaced with aftermarket by the dealership before, and the nuts were 35 mm. The new ones which were cardone hd were 36 mm and I installed them myself and saved some cash. My ram is a 2011 ram 1500 sport 4wd. Your video helped. Thanks alot.
@McGo101 5 ай бұрын
@ryanv7195 I just noticed my inner boot on my Cardone axle is ripped so I'll be doing one again shortly. Got 5 years out of it and rockauto is replacing it under warranty which is a bonus. Glad my vid helped man cheers 🍻
@ryanv7195 5 ай бұрын
@McGo101 5 years! That sounds good to me. What is the warrenty? I didn't even check . I got mine off rock auto as well. Was cheaper to buy the HD version than the regular one on Amazon canada. Hope mine last like yours.
@Finger112 6 ай бұрын
Can you hitch this to a front of a mower that comes with a hitch on the front instead of using the duel mounting plates to the bars?
@McGo101 6 ай бұрын
I'm guna guess no to that. This plow is designed to attach to the front arms on a ztr.
@Finger112 6 ай бұрын
@@McGo101 What are the plate dimensions of the length and width for both?
@FarewellAcres 6 ай бұрын
Worked for mine, thanks for putting this out there for others to save a repair bill.
@AlPelham 6 ай бұрын
Thanks!
@AUSTINJACKSON-oq8be 6 ай бұрын
$600 at Firestone!!! 😂😂😂😂😂 don’t go there
@chipdunham1786 7 ай бұрын
That’s a bench grinder sir.
@anthonyvalentine8467 7 ай бұрын
Suggest to wash machine down in those sentive areas,before you start taking any thing apart,you certaintly dont want to contaminate the oil or filters that you sre replacing,thanks😊 23:59
@MapsanThis-fx7ik 7 ай бұрын
No fluid came out when I removed the plug. Should i be worried?
@McGo101 7 ай бұрын
I would be concerned myself. I would fill and recheck the next day after a short drive to ensure it is infact full. Also just double check u pulled the right drain bolt
@skullll6338 7 ай бұрын
I have had three of these in the past all tick especially when idelling just bought a 24 bad boy with kawasaki 730v it ticks too I have ben told this is a normal what did they tell you about yours let me know
@McGo101 7 ай бұрын
Mine had an abnormally loud tick, had the dealer re adjust the valve lash and its been great ever since! 👌
@tbirdracefan 7 ай бұрын
That dustcover that you discarded because you did not know where it went, I would consider pretty important.
@daryelthomas9414 7 ай бұрын
I use an old fuel hose to pull the plug and start the new one, you can feel the threads better than the socket