3 жыл бұрын
5 жыл бұрын
Пікірлер
@ExNihlo Күн бұрын
Excellent video.
@onslaughtmp 3 күн бұрын
Thank you for the video that isn't 35 minutes!
@Legitdupe 8 күн бұрын
I rarely see someone cutting two coats. Do you do only two coats with rollers and cut once with the brush?
@olD_Eazy681 9 күн бұрын
Cutting in a little more will help. It will help from accidental ceiling taps.
@logansteese 11 күн бұрын
How much pressure in Kn should I be applying?
@mandeepnarang2308 22 күн бұрын
Beautiful paint 🌺🌺👍🏻👍🏻 I feel good to paint on the wall........ But I can't do it 😞
@CrunchySnacks Ай бұрын
They need ones for how to fix how you went over when you don't have the paint.. can you? I'm still going to use tape because I don't have a way to practice.
@fredbarman2538 Ай бұрын
Take off or loosen the switch plate and sockets and paint behind the edges of them! There will need to be a hell of a lot of white to cover up that blue when it gets on the skirtings!!
@roni9275 Ай бұрын
Step 1 : Hire a professional Step 2 : Relax
@gianthills Ай бұрын
not how it's done. guaranteed it's a mess if you look at it from below.
@ashishmanakkalhouse1348 Ай бұрын
❤❤
@Knight71279 Ай бұрын
very nice tutorial
@stevetryit Ай бұрын
kzbin.info/www/bejne/pKC4eKJmpauor9Esi=ggP2gKp4ckkO7ebg
@BongoBoy-l9o Ай бұрын
Good advice, well explained.
@glynharper Ай бұрын
Great work. Thankyou! 😂exactly what I needed to see. Got a whole house to do!
@seventwistsclockwise Ай бұрын
I'm so slow compared to this
@theblerd1889 Ай бұрын
Get to the end and stop…wild. So your not supposed to paint the floor
@seemaab Ай бұрын
Why not just cut the other wall as your gonna be painting it anywauv
@seemaab Ай бұрын
Why can’t you go to the top if your painting it the same colour?
@davy999 Ай бұрын
I see, so to pour paint you have to tip the tin. Amazing!
@alibar101 2 ай бұрын
what colour & paint brand is that? it's lovely!
@patrickclosefitness 2 ай бұрын
Thank you Mister
@deficator750 2 ай бұрын
this is my problem i keep seeing all my cutting edges like they dont have enough paint
@BigDadKevin 2 ай бұрын
How do I avoid ending covered in paint? Everytime I roll a wall the paint "sprinkles" all over my arms, face, and floor
@bruschj 2 ай бұрын
Not a pro but as someone who had that problem and worked past it, good quality brushes/rollers and good quality paint, and when you dip, make sure to roll off the excess, and don’t roll too fast!
@gemma3877 2 ай бұрын
Your clear instructions and reassuring tone made me believe I'd be great at this on the first try. 😂 Turns out that I need more practice, and did a lot of wiping paint off of other surfaces with a damp cloth. Picture a complete newbie to DIY, who's cack handed, a bit impatient, using watered down paint for a mist coat, which dribbly unless very thinly applied. Not sure why I was so confident I'd smash it, honestly! At least it was just white paint and easy to keep wiping off. No doubt practice will improve my technique. At least I got myself a good cutting in brush, so with thicker paint, and less absorbent walls, I might stand a chance.
@Plugs23 2 ай бұрын
I prefer using a 4inch roller when I’m cutting lay paint down bring it lower when I’m doing top cuts makes it easy for roller so they won’t have to get close to ceiling or baseboards
@AwesomeProjects20 2 ай бұрын
What if the ceiling is raw plaster with popcorn texture?
@williamfreeman6935 Ай бұрын
Popcorn texture on plaster is an issue waiting to happen. Popcorn doesn't adhere well to begin with and if it's a plaster surface it makes it even worse. Needs to be sprayed using an airless sprayer. Too much paint and it could all fall off so two light coats is best. Go one direction on the first coat, let it fully dry (maybe even the next day) and go the reverse direction for coat number two. I've seen a few of these types of ceiling textures fail through the years. Just a warning. Good luck to you.
@AwesomeProjects20 Ай бұрын
@@williamfreeman6935 Thanks! I painted the ceiling a month ago. After I watch this video. Two coats of Kiltz, then two coats of Behr semi-gloss Scuff paint. I blew the loose stuff down will and air hose, then primed it. I used a roller that is made of sliced foam. Specifically made for popcorn ceilings. The first primer coat knocked off more texture. Not so much the second coat. The paint locked it all in. Pieces will not fall down anytime soon.
@TitoTellsTheTruth 2 ай бұрын
I'm using the wrong brush😮
@cakeisalie 2 ай бұрын
this tutorial was so easy to absorb, in my mind I'm a master painter now
@wintutorials2282 2 ай бұрын
How did it go
@cakeisalie 2 ай бұрын
@@wintutorials2282 I got sucked into buying more roller heads than I probably need LOL but my walls look great now, very smoothly painted, does not look DIY
@johnmccree8941 2 ай бұрын
All of a sudden... everyone knows how to paint (like no one else does)... and are gonna show us umpteen videos...+.
@DeltonDoucet 2 ай бұрын
I’ll just stick with using tape, my hand is not that steady
@ShaneRoberts-v4i 3 ай бұрын
Who paints their entire room and ceiling dark blue?
@penta-cera-tops 3 ай бұрын
This is...not optimal. You should only roll in one direction and make sure the paint is going on without patches. The more pressure you apply the worse the paint will look when dried.
@chrisbattaglia1436 2 ай бұрын
The harder you push it was causes roosters on the wall, no need to push hard.
@FOURYE4RSTRONG 3 ай бұрын
Cutting in a whole wall at once 😂😂😂😂 what a gronk
@yohannvazifdar5680 3 ай бұрын
Tried this today, followed all your steps and it came out great, without any tape which is now thing of the past. Thanks so much. @Brolux Painting just curious are you based in Melbourne, if so I would be interested in hiring you out to paint a few ceilings in my house which are of a weird shape :)
@SingoMinsk1 3 ай бұрын
Very instructive. Answered key questions. Thanks heaps.
@sabrinal3809 3 ай бұрын
I thought you are supposed to roll toward the window, not this way??
@Karl-s8h 2 ай бұрын
1st no... 2nd yes!
@sabrinal3809 2 ай бұрын
@@Karl-s8h Thank you!
@chriskelly9398 2 ай бұрын
It depends where you enter the room. Its always across the room from the doorway, never straight on. If the light hits the roller marks long ways its easier to see
@Diewitasmile_Inc 3 ай бұрын
Great video
@motormouthalmighty 3 ай бұрын
aw!I love seeing professional technique and application!Alan!pack your bags!You're fired!
@durexyl 3 ай бұрын
take those switches and sockets off the walls please 🙏
@J.D3NNIS 3 ай бұрын
Fantastic. This is going to help me get the job done much faster without having to get a bowl of water and rag to wipe what I accidentally got on the ceiling. Muchly appreciated. Thank you 👍
@Lawrence-Joseph-Norse 3 ай бұрын
Repent to Jesus Christ! Are you a sinner? Mark 2:17 King James Version 17 When Jesus heard it, he saith unto them, They that are whole have no need of the physician, but they that are sick: I came not to call the righteous, but sinners to repentance.
@alipalace6 3 ай бұрын
The only video that shows in actually detail and doesn’t involve 25 min video🤣
@veehill4769 4 ай бұрын
Excellent video.
@veehill4769 4 ай бұрын
Excellent video.
@tjwash2 4 ай бұрын
I saw the words super quick lesson and knew this was for me! Thank you for getting right to it and not giving a long editorial about your life history and expertise like some others do. Great information that makes sense and explains why I wasn’t satisfied with every paining job I’ve done since 1994. Yay KZbin!
@jacec5855 4 ай бұрын
Slight lean to the right? Explain please
@jamezason 4 ай бұрын
To keep the roller against the wall as you cover other areas.
@TheModShopCO 4 ай бұрын
Thanks for sharing, quick and to the point and showing good technique. Got this room knocked out pretty quick after your video gave me the confidence I needed!
@Billkwando 4 ай бұрын
All you have to do is make a V with masking tape across the lip of the can, with the tip of the V intersection of the 2 pieces of hanging off past the lip of the can, then the paint will spill over the tape as you pour, and down the "spout" made by the tip of the V in the tape, clearing the can entirely, and leaving it clean. I found a minute long vid about it.
@EM-yk1dw 5 ай бұрын
What is the best roller for an ultra smooth finish please?