I was looking around for a long time trying to find somebody who has done this conversion, I bought a prerunner as my first truck a few months ago, and one of my point I wanted but couldn't find was a 4x4. I looked under the truck and saw that it has everything to do the swap, and I found your video! Thanks a lot for making these, you definitely earned a sub and and a thumbs up! I'll be watching you do this while I do mine in the future!
@davidwillis50167 күн бұрын
Thanks
@leroyiiimingus865110 күн бұрын
How much for you to do mine
@deandee808210 күн бұрын
all that running gear seems way too heavy, wheels
@deandee808210 күн бұрын
1000 or 1350 cc . . . also, you want to use a lighter wheel, go with a 6.5"-8" very light C/F whatever 16" wheel, car wheels are about 6 times the weight/mass you need, too much, robbing your hp, braking and suspension performance
@David-qw2iv12 күн бұрын
What would be less harmful to tranny and engine of the 3.4. Super charger or turbo. Anyone?.
@TrainerPicasso21 күн бұрын
would this same tutorial apply to my 2002 525i? with the dipstick the oil was brown not black so its still good. but i just had to add a whole quart of oil into my car. my car burns oil
@KyleYanagihara-to1sz25 күн бұрын
Did this make it so it wasn’t such a soft boat feeling? Mines a 2004 extra with a topper
@davidwillis5016Ай бұрын
Thanks
@cirovazquez1028Ай бұрын
Did you regear it???
@thomasgallagher8591Ай бұрын
did you use your prerunner rear driveshaft ?
@mihailiordan8848Ай бұрын
It's a bmw It's going to leak oil 😂
@LuckyAmi-kl5ci2 ай бұрын
The noise is too much I think it will be better for us to hear the sound of the engine
@toubielo87882 ай бұрын
So I can’t buy a Tacoma of this gen that comes all complete this way???
@jordanbrettabbott2 ай бұрын
Ok?
@RDJ-PR2 ай бұрын
Hello! Do you have a list of the components necessary to make the conversion, for Tacoma 2004 4x2 to 4x4?
@ff_rusco59672 ай бұрын
If mine is a four cylinder and I want to put a V 6 into it what needs to be replaced? I’m pretty new to trucks so help would really be appreciated
@Bubblebunz2 ай бұрын
Was the boost at 2 psi due to fuel cut
@Bubblebunz2 ай бұрын
Does the transmission hold up?
@geo4reels4812 ай бұрын
Have you guys ever tried swapping that spindle with a 2nd gen 4wd Tacoma? I wonder if it's the same height and what need to be replaced to make it work?
@davidwillis50162 ай бұрын
Thanks
@Woefman9112 ай бұрын
So upper and lower control arms are the same for 4x2 and 4x4?
@raffaelecarotenuto3 ай бұрын
Good morning, I would like to ask you for information, I have a jeep compass model year 2023 1.6 Diesel 130 horsepower front-wheel drive, can I convert it to all-wheel drive, how can I do it?
@tysonernst96573 ай бұрын
Was it faster than the honda????
@Marincorti3 ай бұрын
Transmission is 50/50 ?
@crip21703 ай бұрын
You’re video very helpful and well explained
@EngineeredToDesign3 ай бұрын
It sounds insane!! Freaking good work, I am the same still figuring out bump steer and trying to finish projects 😂 just stumbled across your channel sweet 👌🏻
@AuditorsUnited3 ай бұрын
you could have aluminum brazed it also called low heat aluminum welding
@user-fq7ku9rw3j3 ай бұрын
love turbos, always gives you a smile
@anthonycooper8443 ай бұрын
Can you do this to a 4 cylinder 2000 pre runner?
@PedroBuritica-vz2cp3 ай бұрын
Can you please send me the list of the build
@javirodify4 ай бұрын
Great videos! I have 2 Tacomas pre runners-2003, 2004. I was wondering in converting one to 4wd, but after seeing these videos I don't think I can handle it... by the way, where can I get the bed cover? Thanks for posting these videos!
@josuelopez96664 ай бұрын
Can you do this to an sr5 2wd?
@ernestalfa90454 ай бұрын
Dude that’s cool I have a pre runner and I’m looking forward to do 4wd
@davidwillis50164 ай бұрын
Thanks again
@davidwillis50164 ай бұрын
Thanks
@marcelinosilva44734 ай бұрын
Yo this build video funny AF,
@BananaBabys4 ай бұрын
I have an 03 with electronic throttle body. I was about to purchase a 2000 4 runner trans but realized it has a kickdown cable. It’s not compatible with my truck
@VT58744 ай бұрын
Curious why you 4wd dash light doesn’t work? Does it have to do with the manual hubs or did you not care enough to wire it?
@onegreatone28104 ай бұрын
Will 2wd motor work in my 4wd 4runner
@cavertiny4 ай бұрын
I'm not sure why you're running that extra realy.. the Auxbeam box has built-in relays and the fuses are there too.
@onegreatone28104 ай бұрын
Have a rookie question will a motor from 2wd work in my 4x4 4runner .im no mechanic but found motor from a 2wd
@TheClassicPaul5 ай бұрын
What rear diff axle did you use didnt say what car or year model
@TheClassicPaul5 ай бұрын
Also curious why welded bunch of stuff. If get right axle is should be plug and play unless did Frankenstein from looks of it. Just curious
@alejandroaguilar-do5lc5 ай бұрын
What size tires are those?
@CRACKEDHOUSINGFAB5 ай бұрын
I believe they were 265 75 r 16 in this video
@alejandroaguilar-do5lc5 ай бұрын
@@CRACKEDHOUSINGFABthey make the original rims look badass
@garygrissom10315 ай бұрын
Just a guess i would think you would need more support out closer to the rear weels if you have any type of power and tork going to the rear end love the channel good to see you back and this is looking like a killer build
@CRACKEDHOUSINGFAB5 ай бұрын
🤞Hopefully it stays together
@devenbelanger84635 ай бұрын
Just talking from what I’ve seen on other channels. You’re gunna want more support further out on the rear axle. I’ve seen guys bend them with that much unsupported. Glad to see the channel coming back!!
@CRACKEDHOUSINGFAB5 ай бұрын
Thanks for the feedback! We are going to see what happens
@stomper25825 ай бұрын
I was thinking the same thing. I could be wrong. Otherwise, good job. 😮
@devenbelanger84635 ай бұрын
@@stomper2582 if you watch anything from red beards garage he always puts 4 bearings on the axle cause they have bent them having that much unsupported
@bigjohnson11485 ай бұрын
Hey where have you guys been?
@CRACKEDHOUSINGFAB5 ай бұрын
Taking a nap but we are back!
@DV-ol7vt8 күн бұрын
@@CRACKEDHOUSINGFAB really?
@Chuck2jz5 ай бұрын
Your mass air flow sensor should have been before the turbo, not after. It won't get a proper flow reading on the boost side. Im not sure if it would totally fix your lean issues, but it would certainly help. As the ecu is not calculating for the air density. That's not how maf sensors work. It doesn't know the difference between high and low density air(boost vs no boost)