Hilarious i just installed one and NOW I see this video

It is not a weapon til it is used in a destructive manner,up untill then it is considered a firearm.

Uhm, did you do the maintenance and upgrades? Everything go back together nice?

Lok-tite won't do you any good if you don't degrease the threads on the screw and the frame and make sure both are dry before applying your lok-tite, and just a tiny drop will do.

Wow. 2 real good-looking guns right there. The Rossi is really nice, but this silver and black Taurus is just stunning.

Taurus junk, raging bull model 66 duty weapon both locked up, rossi 720 beat the hell out of it never did hiccup

Boycott Taurus…

Caleb works for Taurus 🤣🤣🤣 I can't think of any better justice for such a giant douchebag.

Would love to see the follow-up video someday

Quick tip, when removing grip frame screws, take the screws that are near the hammer first, and the screws in front of you thumb next

Really great guns❤

That little tool was garbage. All that need to do is use your thumbnail to remove that spring and pin. I work on these a lot and those gimmic tools will ruin the spring and marr up the frame but you already proved that.

Sir, It's a $270.00 +/- gun. I totally disagree. Before your review did you even bother to take this gun to the range to see how it actually performs. I have watched many reviews on the revolver and your review and comments are definitely in the minority.

I take strong exception to the Armscor 200 critic. I purchased my first Model 200 in October 2010. I have put a lot of .38's down range with my Armscor. When I say a lot, at least 600-rounds+ in a near 14-year period of ownership. My 200 was so bad that I purchased two more Armscor revolvers, the Model 206 double & single-action and a DAO Model 206. The first 206 came 10-years ago, the DAO 206 a recent purchase. Yeah buddy, the fact that the 200 has the same exact profile as the 1977 Colt Police Positive, with exception to the Colt blue finish. Right out of the box in 2010, at the local gun range, I have shot mostly standard load .38's, with quite a few rounds of +P ammo.The 200 and 206 Armscor has thick steel top straps, excellent fixed sights, and factory grips that can be interchanged with post 1966 Colt D-Frame Grips, if desired. I don't know about this man's Model 200. But food for thought. Considering the excellent, no problem service I have received from all three Armscor Revolvers I now own, if I were a young cop again, back in our revolver days, my confidence in the Armscor would extend to duty revolver use.This young man needs to price the new Colt Viper that. Colt has recently introduced. At 999-dollars a pop, for a fixed sight .38/.357 revolver, the Armscor critic can get that fine detail to polishing, minus some of the machining markings on the inside of the frame, totally invisible to the naked eye. My trigger-action on my first Armscor, the Model 200, seem to smooth out after a couple of hundred rounds or so. For my 250-dollar Model 200, and the two Model 206 Revolvers, smooth sailing from hard time testing. The Model 200 is a working man's handgun.You can pack this arm in your vehicle, in your boat, at home for violent booger-bears visiting uninvited, for the armed security officer, that wants a reliable duty revolver that will provide the defense needed. The only competitor that comes close to the reliability of the Model 200, is the Taurus Model 82. Why would this gentleman pay 250-bucks for a new Model 200 just to make a video bad-mouthing the hell out of it? There are plenty of satisfied Armscor 200 and 206 owners that will disagree with your "short-life" prediction of your Model 200. Maybe you were one of the unlucky buyers that got a lemon 200. Send it back to the factory with a detailed explanation of what you think is wrong. They back their product line up. My ownership of the Armscor also extends to their excellent GI 1911 .45 Pistol.

My 4 5/8" Vaquero won't cock if I put the long lower frame screw and pin inlet on the right side. My 7.5" Vaquero doesnt care but the pin sticks out the frame a little more if I orient it to the left.

Is this a double action Vaquero since the pawl rotates the cylinder when you pull the trigger? And have you replaced that come apart constantly screwdriver yet?

That roll pin is for the sear, and the spring is for the firing pin block, feel bad for whoever’s gun that is

I have a M200 it shoots good. I use my reloads in it. Never a problem.

For whatever reason Taurus has refused to release the Rossi to California. So I purchased the 856 executive and model 65. I told em before i would buy this and the other 2 in the Rossi line. Im serious. Cmon Braztech, wake up! This is a home run for you!

I HAVE A M605 PROTECTOR 357 WHAT IS BEST WAY TO LUB DOUBLE ACTION STIFF TRIGGER

O Revolver mais lindo do mundo!! Ainda vou ter um desse, aqui no Brasil nao tem pra vender... uma pena Aceito um de presente. hahahahahah Abraços e sucesso!

I trust what your saying because your a smith. But with these being budget out of 5 revolvers you might get 3 ok. Check timing and lock up. Cylinder gap and barrel cant. If shop wont let you ge somewhere else. I looked at 2 and did this and picked the one i wanted. Granted this is only a range gun for me. Not a carry piece for sure

My M200 did the same seizing upon backing the hammer. And on the same chamber each time too. I simply forced it back when the hammer snagged a few times. The problem solved. Obviously due to the rough parkerized finish on the cylinder/forcing cone.

Dam good gun. !!!!!!!!!!!!!

It is a. Keeper

Extremely funny video! Are you sure you're a gunsmith😂

The M200 and M206 are very good guns. What are you talking about? I have both of them they work very well.

There's a bit of misinformation here in regards to timing. Ideally the bolt should come up in the lead to the cylinder notch. Not at the cylinder notch. You don't want the bolt to start peaning the edge of the cylinder notch. That will cause problems later when the bolt won't fully enter the notch.

Awesome video and thanks for sharing

Helpful vid, but almost unwatchable in the beginning with you smacking that screwdriver all over that poor frame.

You call yourself a gunsmith, you should be a little less vigorous when you're inserting the cylinder back into the frame. Anybody that knows anything about revolvers knows that Hollywood style slamming cylinders back into the frame is not the way to handle revolvers.

A New Vaquero is different than a Vaquero. Please update the title and Description. Thanks for the info and great video. I have a pair of SASS Ruger New Vaqueros with consecutive serial numbers in .357mag.

Ou trouver ce vaquero?

Great!!!!!!!!!!!!!

😊great video have a question have a couple vaquers that doesn't cock when turned upside down and make a difference sound when spinning the cylinder turned down sounds normal when turned up makes a completely different sound and a lot louder Any suggestions on fixing these problems

Lets look at the cylinder ratchet...I bet it looks a blind chimpanzee with a dremal tool made it.

I have an RP63 and my only complaint is the grips. The stock ones will do until aftermarket catches up.

Its a $200 hundred dollars gun what did you expect i got a smith and wesson and had the same problem that all im saying

Taurus hired Caleb so he wouldn't goof in the "Judge"?

You're a "Gunsmith", and you didn't clean the front of the cylinder/back of the forcing cone (gun has been fired) before measuring the Cyl/barrel gap!? Your measurement is completely invalid.

I appreciate your video much

Looking forward to the next video! Just out of curiosity what are the Factory Hammer and rebound spring weight? What would be good replacement Springs?

Thank you please add the stripping of the slide Thank you

One thing that you really need to do anytime you buy a revolver is test it for push off, especially anytime you're messing with sear angles. With the hammer cocked back, push forward to make sure it doesn't go forward! If it does you have one dangerous firearm and the sear and trigger need to be reground. Also I've never worked on ANY revolver that had Loctite on the side plate screws. Just tighten them down with a proper screwdriver and they'll stay put.

these rossi revolvers are great. i just wish they woudl change the grip design and make them compatable to Taurus revolvers.

Priced as a range toy and built like a range toy. Anyone seriously using this for self-defense that's conscious about budget could save $100 more for a better built Taurus or Ruger. Or continue living in delusion that it's just as good.

This guys a joke...!!

That new Colt is loaded with MIM parts. Nothing like the old colts that had forged parts that were later machined, treated, and hand fit.

Dude is particular, & a heck of a gunsmith, obviously.

Just ordered a new Armscor M200. I just want to see if it is a reliable shooter & accurate.