Жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
4 жыл бұрын
4 жыл бұрын
5 жыл бұрын
Пікірлер
@MauriceDick-y6x 10 күн бұрын
Jamaal Garden
@RobertDixon-i9o 13 күн бұрын
Cristal Mountains
@RonnaMeece-e8u 14 күн бұрын
Kiehn Well
@postyyy3258 Ай бұрын
So should the switch always be on auto or should it be on off
@OnlySepticAndUtilities 29 күн бұрын
It should be in auto normally. That will allow the pump to run automatically when the level activates the on float. Off will cut it off and it will not function at all. On will run the pump and it will not stop until you turn it off. Only run it in auto.
@sjerhombus 27 күн бұрын
The On/Off switch should be in the On position and the Hand/Off/Auto (HOA) should be in the Auto Position for your typical day to day use. The Hand position is manual run and can be used to drain the tank for service or any other need. NOTE: Do not forget the pump in Hand mode as this may result in the pump running dry risking damage to the pump and/or over saturation to where the pump is moving fluid to.
@las8712 Ай бұрын
Great info…even better if you get rid of the music!
@Boomie0419 3 ай бұрын
Do you have any videos that explains how the floats act that control a lift station without a transducer? Theres 5 i believe (I have 2 stations with Low, on/off, lag, lead and high well) im trying to understand these better
@sjerhombus 2 ай бұрын
Most control panels operate typically with 3 to 4 floats, but some may use 2 or 5 floats though this is less common. In some cases additional function may be needed like Redundant Off or second High Alarm circuit which may use up to 5 floats in some applications but are not limited to that in custom panel situations. Please see the Demand Dose and Time Dose video links below that cover how most of our catalog product operate. If you would like further information, please call our tech support team at 1-888-342-5753. Deman Dose Theory of Operation: kzbin.info/www/bejne/eHLLh6t_adhlZsU Timed Dose Theory of Operation: kzbin.info/www/bejne/mKebiatrnMinhaM
@ZedZane597 3 ай бұрын
Where can we price a unit?
@jorgeroush4322 22 күн бұрын
About $320 thru a pump supplier.
@laars0001 3 ай бұрын
2 questions: 1. Ground not needed on the piggyback quick fit, just hot and neutral? 2. How do you plug the odd connection plug into a waterproof plug cover kit made only for straight plugs not angled plugs i.e you cannot close the lid on the box to make it water tight because the plug prevents the box from closing. Why the question of the box; the 'electrician' installed it with lids open and snow/rain = tripped GFCI in both the pump and the alarm. Yes the chump installed 2 boxes like this and then wrapped it in heavy green plastic and said " for extra water proofing"
@Notpublished 5 ай бұрын
TY what are the alarm conditions?
@murky2502 6 ай бұрын
Can you extend the distance from the float to the alarm by running THWN in conduit, or UF cable?
@sjerhombus 6 ай бұрын
Yes, you can extend the wire from the float to the alarm. This is a low voltage low current circuit on the Tank Alert AB and using 18 AWG wiring you could run up to 500 feet one way. You could use either UF or a run through conduit which would make it serviceable in the future if additional wiring is needed between the two points. If conduit is used we recommend sealing the conduit to prevent sewer gas and moisture damaging your wire splices and escaping from the tank. If you need further assistance, please contact our tech support at 888-342-5753.
@henry6525 6 ай бұрын
Not useful for the perforated 4" well. Tight space.
@BackwoodsJournal 8 ай бұрын
What do you do if there are no lights on, did it lose power or something?
@sjerhombus 8 ай бұрын
There are a couple things that could cause the issue you described, one of which being the unit losing power to that circuit. It would be best to call our Tech Support team at 1-888-342-5753 so they can assist you in more detail.
@WEdway33 Жыл бұрын
Excellent, thank you
@glasser2819 Жыл бұрын
What an excellent product presentation 👍 Textbook perfect with product applications... besides your products are great. If i can suggest a new targeted profit center on "smart pump control". I have built a prototype with a German electronic soft-starter zero-crossing and a 30Amps relay. 🙂
@osbaldobarraza4341 Жыл бұрын
Necesito como conectar electrico
@sjerhombus Жыл бұрын
Comuníquese con nuestro equipo de soporte técnico para obtener más información al 1-800-746-6287.
@Syncsparky Жыл бұрын
Do you have any videos of the tank alert AB sounding? Id like to hear what it sounds like, mine recently did not give an audible alarm and i ran out of water. I belive the LED worked, but we 100% did not get any sounds or do any silencing.
@sjerhombus Жыл бұрын
The horn on the Tank Alert AB alarms around 87 decibels which is incredibly loud if you are in front of the unit. You could check the time stamp of this video at 4:22 to hear the unit alarm but please note that in person will likely sound different. For troubleshooting you could unplug the unit for 5 seconds then plug it back in. With the power restored, try hitting the test button on the front of the unit. If the horn sounds, then you may have an issue with your alarm float circuit. If the horn does not sound, that would indicate that the horn has exhausted its lifespan and the Tank Alert AB would need to be replaced. If you would like to talk to our tech support team you can give them a call at 1-888-342-5753 ext. 2. Thank you.
@gsmacka96 Жыл бұрын
Thank you for the video. I found out my waste water sump pit had a sump pump instead of a sewage pump. The sewage pump i bought had one of these floats and i didnt understand it
@sjerhombus Жыл бұрын
No problem, glad we could help!
@mesranhobbies3799 Жыл бұрын
terbaik videonya...semoga terus berkaria....done sub.
@pattyleabo426 Жыл бұрын
Would love to figure out a way to enclose this for outdoor use
@sjerhombus Жыл бұрын
Hi Patrick! We've got the Xpert Alert RF now, which lets you put a module in an outdoors panel that communicates wirelessly with the Xpert Alert WiFi indoors. That might be an option! You can call our tech support team for application-specific ideas at 800-746-6287.
@cheesun124 Жыл бұрын
but what do you do if the indoor alarm goes off. How do you remedy the situation of rising water?
@sjerhombus Жыл бұрын
You can silence the alarm, then please call your local septic installer or plumber to have the system inspected. They can find the cause of the alarm condition and correct the issue.
@cheesun124 Жыл бұрын
@@sjerhombus I’m on it thanks. Must be the rain from last night since the septic is fairly new
@michaelcostello6991 Жыл бұрын
Is there any videos that discuss old relay pump control panels. I would appreciate a link etc
@sjerhombus Жыл бұрын
I don't believe we have any videos like you're describing, sorry! If you have a question about any of our products, you can call tech support at 800-746-6287.
@michaelcostello6991 Жыл бұрын
@@sjerhombus Thanks for reply
@sntemp Жыл бұрын
Question: I have a float switch that has gone out in my septic tank and it's tethered near the base of the tank about 6 feet from the top of the tank. I can get the old switch out by cutting the plug side and pulling the bulb side up pulling the cord through the tether strap. My question is can I get the new float switch down there and tethered without actually climbing into the tank? Can I tether it on to a weighted post and just lower that in?
@sjerhombus Жыл бұрын
Hi sntemp! In the industry, many installers will use a spare piece of pipe or stainless-steel chain with an anchor mounted to the top tank or the discharge line that a person could attach the float to. This method allows easier maintenance when servicing the system. However, we recommend that you contact your septic installer for safety and system integrity.
@sntemp Жыл бұрын
@@sjerhombus thanks, I went with the stainless chain method. After about 10 days I checked the tank and it is working HOWEVER that stainless chain turned brown with some sort of spores on it really quick. I’m shocked how quickly that chain turned in just 10 days.
@sjerhombus Жыл бұрын
@@sntemp Apologies, we didn't discuss the rating of stainless steel. A build up of deposits or corrosion can form on just about any material that is introduced into a septic tank due to the harsh environment and vast chemical makeup. You will want to confirm that you have 316 rated stainless steel or better, as 316 stainless contains molybdenum, which drastically enhances corrosion resistance compared to 304 rated stainless steel and greatly increase the lifespan of the chain. It's a bit complicated, but we hope this helps!
@geogeduggan6579 Жыл бұрын
I never had a well before and I'm confused about the float direction. Float up turns water off , down turns on. My new float in down position turns water on. I need a float that turns water off at top position. Help ?
@sjerhombus Жыл бұрын
Hello! Please call our tech support team at 800-746-6287 and they can assist you with finding the correct switch!
@hectorgarcia8811 Жыл бұрын
If you powered the whole box with 220 how can you power that little board where all the floats going??
@sjerhombus Жыл бұрын
Hi Hector! For a single-phase Model 122 duplex panel, the board will need 120V incoming power aside from those used for the pumps. For a three-phase Model 322 duplex panel, the incoming power for the board is provided by a step-down transformer built-in to the panel. If you'd like to discuss further, you can call our Tech Support team at 1-800-746-6287!
@Beniamin6665 Жыл бұрын
Are you looking for a distributor here in Ontario Canada. I do not see your systems anywhere… We would know.
@sjerhombus Жыл бұрын
Hi Ben! Please reach out to our Canadian sales rep Pino at [email protected]!
@danielteyehuago1633 Жыл бұрын
This is very educative, thanks for sharing it with us...
@danielteyehuago1633 Жыл бұрын
Thanks for sharing it with us...
@sohailjanjua123 2 жыл бұрын
Hi, I like your video. Thanks
@sjerhombus 2 жыл бұрын
Thanks, Sohail! Glad you found it useful!
@ev6625 2 жыл бұрын
What if it looks like a dim red light is on? Is this normal? Just bought a house and the inspector didn’t mention this. Now we are worried something may be wrong? 😕
@sjerhombus 2 жыл бұрын
Hi E V! Please contact our toll-free tech support number at 800-746-6287 and one of our techs can help you! They're available 7 a.m. - 6 p.m. CST.
@droutdoors1991 2 жыл бұрын
Explained it perfectly. Thank you
@shoyur 2 жыл бұрын
some places use the terms NO and NC, some places uses the high level and low level, im in a new home with a TA AB-01H kit installed underground, now i dont have a continuity with the alarm float, i dont know if its ok or not.. and the alarm box makes free games... random chirps, and sometimes constant alarm and the hush button does not always work, like randomly, nothing was physicaly damaged..
@sjerhombus 2 жыл бұрын
Hi, Mike! You should contact our tech support team at 800-746-6287 and they can help you troubleshoot this problem!
@manufacturersmarketing 3 жыл бұрын
Great overview! Thanks!
@sjerhombus 3 жыл бұрын
Glad you like it!
@budacah 3 жыл бұрын
My SJE tank alert wiring and float were replaced 4 mos ago..now the alert box is making a buzzing noise ..and no..the red light is not on...I'm confused as to what may cause this and what may happen...thanks for any help
@sjerhombus 3 жыл бұрын
Hi! Please contact our Tech Support team for assistance with this issue! For product technical support: 800-746-6287 [email protected]
@ipmscout1307 4 жыл бұрын
followed all instructions and cannot get my device to register. ii have a soild blue light and am connected to the same network as my router does the router need internet?
@sjerhombus 4 жыл бұрын
Hello, sorry to hear you're having problems! Please call our tech support team at 800-746-6287 and they will help you finish this installation.
@peterwick902 2 жыл бұрын
@@sjerhombus I've been dealing with the same issue and the email response is that the server is down and being worked on. I've had the device for over a month and haven't been able to use it yet. Frustrating.
@sjerhombus 2 жыл бұрын
@@peterwick902 Hi Peter! I brought this up to our IT team and they were able to fix this particular problem. Please give it another try! If it still isn't working, please call our tech support team at 800-746-6287 and they'll help you with setup.
@breeze787 4 жыл бұрын
Thanks for putting this up.
@sjerhombus 4 жыл бұрын
You're welcome, we're glad you find it useful!
@dennisvarnau8340 6 жыл бұрын
This is exactly what I'd like to incorporate into my duplex sewage pump system. The problem I have with SJE Rhombus website and their literature is that every product seems to 'stand alone,' that is, there is no information on what products can incorporate the use of the MySpy WiFi Messenger Unit. I was looking at the Ultra Nator to see if the MySpy WiFi Messenger can be hooked up to it. The Ultra Nator comes with plug-in receptacles and two switches, but does not talk about the alarm sensor (float) and where and how it 'plugs into' the Ultra Nator. The other information-lacking problem I have with their product information is the lack of comprehensive pictures of each product so one can see what goes in and out of each side of the control box. Trying to find out what I could use to replace the discontinued Hydromatic Pump+ Model 122, is like trying to get Top Secret information from SJE Rhombus. As a past MRB qualified Production Engineer at the GE Aircraft Engine Group in Evendale, OH, I find this lack of product information very frustrating, even after contacting SJE Rhombus for some detailed product informaiton. Extremely frustrating!
@sjerhombus 6 жыл бұрын
Hello Dennis, we are sorry to hear that you aren't finding the information you need. Thank you for your feedback about our website--we will take this into account! Have you tried calling our customer service team at 1-888-342-5753? They will do their best to assist you.
@dennisvarnau8340 6 жыл бұрын
I finally installed an SJE Rhombus 1221W114H6A10E17A for two Zoeller N267-G pumps. The kind of information I was looking for was compatible products that would take information from the controller and feed it to my cell phone through the office WiFi router over the internet. The kind of information I was hoping to get over the phone would be more specific than just an alarm indicating something (non-specific) is wrong with the system. There is a circuit available from this controller that uses either NC or NO contacts to send a signal out to some 'gateway' component, but identifying what "gateway components" are readily available to integrate into this particular system controller is somewhat hard to find or obtain - when it should not be if the sale of other ancillary products is desired. I actually expect this setup to be very reliable and last longer than I'll be around over the next 10-15 years, needing no cell phone monitoring, but it would still be a nice feature to set it up further for cell notifications even if it were only for a non-specific alarm situation. Having temperature sensors in the vaccine refrigerator, water and humidity sensors in the basement that send current status and alarm situations, if set points are exceeded, over the internet to my cell phone, using IoT technology just makes life a lot more easier to cope with in real time. They are all just 'entropy' alarms, in my opinion, until we all reach absolute zero K.