Helped with my 20 year old audi a4 oil leaking 🤷‍♀️ticking quited but not completely gone😮‍💨

Looks good and who cares if its not Roush looks exactly the same lol

brother torque spec your wheel bolt

Sorry couldn't show you the real important parts🙄

Thank you verry much👍 Very useful video

My guy you just earned a subscriber. I know this video is old. But i needed this information! I have a 16' and im having this annoyance myself!

Just did my Uniden R7 on my stang and it worked perfectly. Thanks for the vid🤙🏽

I just got the SVE braided clutch line.. I probably should have gotten that one you got but it's after the fact and from what I here I got a really good line too.. Anyway good video..

How much oil does that engine take? 2 bottles seems excessive to me.

did u use the the rear diff as a jack point to jack the back end up?

Just did mine, at 41k miles, 75w140 amsoil severe gear and a bottle of ford friction modifier did almost 2qts and the 3.8oz bottle of FFM

I recommend doing the rear every 15K miles especially if you are hard on your car or have a heavy foot.. 20K if you go easy mostly..

Great video! Thanks for sharing and for the time you took to help others learn

Maaaan bet you didn’t think you’d be this flooded with questions! But YES my quick question is if I need to get this done on my 2010 GT 4.6? Thanks

disclaimer, when you had the ceratec, It must be 9.5 L of oil/ceratec mic, you don't put 9.5l oil and then add ceratec because you will overfill it, for example if you are to add 500 lm of ceratec, you put 9L of oil and 500 ml of ceratec... also ceratec is said to last for at least 2 oil flush so no need to add it all the time , or you can half the quantity for the nexts ones

I think ceratec has a lot of calcium in it. If an engine calls for ILSAC-GF6 or whatever, that stuff might not be good for LSPI potentiality.

It fixed the ticking in my 2008 Mazda MX5. Done as part of an oil change and allowed for the extra volume of Ceratec to total volume. My son was with me when we started the engine and we instantly looked at each other once the engine turned over. The before and after was clear. No more ticking. Even after a several subsequent oil changes.

Sounds like a v8 ford

I have a 2017 Mustang GT that's throwing p2006 and p2007 IMRC Codes. I'm not really sure what to do or where to start. I don't have a ton of money to spend.

Big difference in sound. This definitely works. The ticking noise is definitely gone.

question bro, i’ll be doing this on sunday do i still need to cap off those two intake ports on a stock air box ?

0:47 Just pull the fuse. No need to remove the seat…

How was the mobile 1 5w50 oil you used in an older video?

Do you know where you would run the hoses if you were keeping the IMRC?

Bro I could marry you! Thank you

When you do go to Cars and Coffee, just don't end up doing something stupid and crash your Mustang like a lot of others have already done.

I just picked up a bottle and did my oil change last week, do I add a bottle on top of the 10qts of amsoil? Would this not over fill? If i need to remove oil prior, how would i do this ?

just the video i needed . After a car crash repair my driver side window wasn’t realigned and caused the most annoying sound ever . Thanks to your video now if it fix . Took 20 minutes . Pretty easy

Do you need a tune if you put it on a 2015 gt? If so which one?

What about the 2017 this one I wanna buy has the ticking and it’s not super loud but I am worried about the tik

Hell yeah man, you earned a sub for this. You are a true G. 💪

I can hear everything. Nothing changed😂😂 its only placebo effect

Im mécanicien in Belgium, the sound is your valves !!!! ( adjustement)

Hello, did it work after a few days?

It’s best to add Ceratec when you replace engine oil. Also, best to drive 200-300 kms before you can feel some difference.

Whats the difference betwenn the J&M Clutsh Line and the Steeda ?

Good Deal 👍

No hardware store I’ve ever been to takes any types of fluids. Idk if they’re lazy or just done away with it, can you take it to dealers?

Ticking noise usually happens when a good beat down happens no shit in a bottle is going to put metal or bearings , timing chain stretch back and like it's really fixed. U keep telling ur self it's fixed and see how long that works

One tip to remember is after installing new gear oil is to find a big empty parkinglot and do 8-10 slow tight figure 8's to slosh the gear oil with friction modifier on all the gears to coat em

You need to take out the same amount of oil as the ceratec that goes in. You never want to have the oil level over the fill line cause too much oil can cause damage.

How do you know it's full so you don't overfill it? Is it harmful if you do overfill it?

Is this an actual fix, a bandaid or psychological &&&&. Everyone needs to look up THE OIL GEEK. Adding these additives in general can be more harmful than good, it also depends on what type of engine oil you are using. Some brands of additives react harshly to certain oils, so hence your engine protection is compromised- bearings, piston bore and so on. PLEASE, PLEASE DO YOUR RESEARCH PEOPLE and what you may find might make your head spin. Good luck 😂

10mm spanner. Too tight.

Is this oil ok with a auto transmission

Do you have a detailed list of tools used please

Not all heroes wear capes….I’ve been getting the run around I think I’m about to bust this out myself.

Stickers says to add 75w85 and I noticed you added 75w90. Would that affect anything?

So now your oil level is above max? Additives are supposed to be added with oil so you still have the correct oil level. You could also remove some oil before dumping two bottles of more liquid into your oil.

Mine doesn’t stay down it goes back up a little and activates the sensor, would this fix it? Also the break doesn’t fully engage once I pull it up