AtsTV

Пікірлер

@masterpaine9161 Ай бұрын

Focus!

@MatthewSmith-kd3mu 4 ай бұрын

Tool?!

@OfficialNSGAN30 8 ай бұрын

whats the size of that splashgaurd and where could i get one at

@no_more_free_nicks 11 ай бұрын

This looks like some kind of weird imperial technology.

@atshelp 11 ай бұрын

Imperial British? Or imperial Star Wars?

@cameronfoster6793 11 ай бұрын

What would be the issue if Im getting little to no pressure coming out, just enough to fill a cup then it takes 5 min to refill any help would be appreciated

@atshelp 11 ай бұрын

Sounds like a bad spring in the glass filler. Might need to be rebuilt or replaced.

@kaylee-w6b Жыл бұрын

kaylre

@jfrancis98 Жыл бұрын

And on the weekends he is Sterculius, keeper of the doo doo.

@noteslayer9253 Жыл бұрын

How to unjam without the tool?

@SandwichesRule Жыл бұрын

Hi , without pulling an old drain , how can I know if I need a 3” or 3.5” to replace the 3 drains ? Thank you

@stevewave116 Жыл бұрын

Look at the manufacturer

@gregbarnett7428 Жыл бұрын

Does anyone know where to get that unjamming wrench? Have the ss-150

@MISTER__OWL Жыл бұрын

They advise against bones in the disposal and y'all had wing bones ugh

@wesleyturner3494 Жыл бұрын

With the shape opening in the bottom of the pop it Is there a certain way the pop goes into the drain for it to work properly

@atshelp Жыл бұрын

Either direction.

@kingokafor6215 Жыл бұрын

You have to really tall with long arms to do that

@PhilogusRex Жыл бұрын

Appreciate the details! My girlfriend is opening her own bakery and the space doesn't currently have them installed. Besides the safety aspect, there's also the use of having a water tight seal. It sucks having to refill the pre-soak and sanitizer sinks all the time because the plugs don't fit great. These solve that issue

@zipzippery Жыл бұрын

good job Tim - no faffing around - straight to business!

@HaloGTMaster94 Жыл бұрын

Need that commercial tool!

@thesilverlearningchannel6560 2 жыл бұрын

best video on this subject, thank you!

@atshelp 2 жыл бұрын

Thank you! 🙏🏻🙏🏻🙏🏻

@leodc202 2 жыл бұрын

Where do i buy the bowl sink for the garbage disposal

@JAWSFREE 2 жыл бұрын

you mention check valve style parts but I can't find any parts for those on you site

@atshelp 2 жыл бұрын

There’s check stems available for most brands. Faucet parts, then click the brand in question, then scroll down. Not all brands have them available. And it’s not it’s own section.

@อุรุพงศ์ยินดีเจริญ-ภ2ท 2 жыл бұрын

ข

@jebuschrist9161 2 жыл бұрын

Can you put this on a toilet?

@Timetonut 2 жыл бұрын

Please focus this please.

@TraceguyRune 2 жыл бұрын

This dude litterally dumped chicken bones into his. No wonder it's broke

@thebiglt2187 2 жыл бұрын

This is a commercial garbage disposal. It can handle more than bones

@caseyoliver4718 2 жыл бұрын

Wasn't Nothing to do with it if you 🤷 didn't see what was down in the disposal it was a spoon and besides 🤷 garbage disposals are very powerful machines they can handle bones but mainly chicken bones ain't Nothing to a garbage disposal it can handle it and it is No different then a Granulator.

@JimTMcDaniels1 11 ай бұрын

Your statement is inaccurate. It depends on the rating of the disposal. For instance the Commercial 1 hp model SS-100 is only rated for fruits and vegetables. Take care@@thebiglt2187

@PlatinumEagleStudios 2 ай бұрын

Use eyes. It was a spoon. My God you're slow.........

@nhs20102011 2 жыл бұрын

Life saver

@keithtaege3187 2 жыл бұрын

How can I pull out a pressed in valve cartridge?

@atshelp 2 жыл бұрын

I’m not following. Pressed? What are we working with here?

@keithtaege3187 2 жыл бұрын

@@atshelp The Encore valve has a knurled ring at the top to prevent it from pulling out easily.

@atshelp 2 жыл бұрын

@@keithtaege3187 if it’s encore, it’s not pressed or knurled. I believe you might be describing the barrel. They sometimes get seized in the valve with calcification. It is supposed to pull right out with the stem. Try a lil WD-40. Let it soak. Then thread the stem back in the barrel with the handle for leverage. And pull.

@keithtaege3187 2 жыл бұрын

Where can I buy parts for a check valve? (Encore KL-41)

@atshelp 2 жыл бұрын

Unfortunately they just do stem assemblies. No parts. www.allthatstuffsupply.com/encore-stems

@wisamo.81 2 жыл бұрын

Where can I get that tool to lock the flange in place?

@wisamo.81 2 жыл бұрын

Where can I get that tool? The one that fits between the notches and locks the flange in place?

@7vanzzy7 3 жыл бұрын

Thanks for the video. Trying to remove a Krowne faucet stem. I have the nut fully loose but it will not pull out, any suggestions?

@atshelp 3 жыл бұрын

Sometimes calcification sets in around the barrel. Leave the nut off. Screw the handle back on for leverage. Wd-40 all around the barrel. Lots of wiggling back and forth to break it loose.

@TheRobert9427 3 жыл бұрын

Great video, thanks!!

@atshelp 3 жыл бұрын

Thanks!

@matteoho3575 3 жыл бұрын

Thanks for sharing !

@manstersr 3 жыл бұрын

I'm installing in my garage an American Standard 8350235.002 Faucet into an old style cast iron porcelain/enamel commercial deep sump sink that sat in my back yard for about 30 yrs. (not too rusty either). The video helps as I had purchased with the faucet a T&S B-0230K nipple kit or as they call it installation kit. I'm glad you answered someone else's question about putting pipe tape on the nipple part going to the faucet but with this kit I threaded the nipple into the block part and it doesn't seem to tighten before it bottoms out. I plan to put about 8-10 wraps of tape on it or whatever it needs to make it tighter. I was wondering about the slight offset of the faucet inlet, is that for slight variations in the hole centering of different sinks and/or for leveling wall mountings?

@atshelp 3 жыл бұрын

That is weird that is bottoming out without tightening. There is supposed to be a slight taper to the thread. But thread tape should help. As far as the offset, yes it is just in case the faucet holes are slightly off. A lot of builders will punch holes in their stainless on site.

@edwardg9695 3 жыл бұрын

Did not talk about mounting options (bottom, rear, top..)

@j19527 3 жыл бұрын

Very informative! Keep doing videos! I love to learn about these product lines and what each brand has to offer! I service restaurants.

@kylehorowitz2081 3 жыл бұрын

Salad down the garbage disposal operations priest river high school

@marklarson2299 3 жыл бұрын

My question is to the Ats guy my kit has the large black washer. You did not use that in your video with the backsplash mounted faucet if I use it which side does it go on the side where the faucet is or the backside behind that Jagged washer

@atshelp 3 жыл бұрын

Black rubber washer on the backside of the sink before the jagged washer. This helps lock it in place and prevents slippage. 😉

@BrantAddy 3 жыл бұрын

What kind of drain basket do you use for a stainless commercial sink that has no recess for the basket flange? The sink bottom is flat, with a short "neck" flange underneath the sink.

@tonyisgonetomorrow 3 жыл бұрын

Pulled the fking handle right out of one today at work

@atshelp 3 жыл бұрын

Oooooof. I’ve seen some of the cheaper quality ones sheer right in half.

@pablop1111 3 жыл бұрын

Ive done that too!

@deezynar 3 жыл бұрын

Hey, amigo. I just installed a new faucet with compression valves and check stems just like you showed in the video. I turned the shut off valve back on after the install, and the cold water was running and will not turn off. Is there some trick to these things? I've never worked with them before.

@atshelp 3 жыл бұрын

I would turn the water off and check that check stem for debris. Then when turning it back on, do it slowly so you don’t shoot a punch of pressure at that check valve all at once.

@deezynar 3 жыл бұрын

@@atshelp Thanks for the reply. I figured out what the problem was. The brass section has a plastic washer/seal attached to the bottom, and that thing was a bit off center. It wouldn't let the brass part nestle into place and seal. I pushed the seal over so it was centered, then I used a clamp and pressed the brass part down, which did the trick. I asked three different plumbers for advice and none of them had ever encountered that problem before.

@aliagha1221 3 жыл бұрын

Don't buy any of his bull shit. just go to home depot get a $6.45 brass connector with 1/2 inch male nipple with 90 degrees at the other end with 3/8 hookup and find a flat washer to fit over the nipple and use Teflon tape and tie them together,it worked for me will work for anyone. The part is at home depot one the brass connectors sections If you want the part number let me know. Some of the online sites rip you off asking over $400 dollars for this stupid connection parts that is used to tie a $50 faucet to your sink!

@sally26 3 жыл бұрын

Stiro is for to go...very handy to have a lever that doesn't pop a whole in the cup!

@tdivona 3 жыл бұрын

great video thanks guys!

@franklinidrovo1353 3 жыл бұрын

Hi, how are you ? do you put tape or a washer on the nipple??

@atshelp 3 жыл бұрын

Little bit of tape works.

@franklinidrovo1353 3 жыл бұрын

Thank you! so much.

@manstersr 3 жыл бұрын

@@atshelp Great, thanks I was wondering about that.

@tonyantonio176 3 жыл бұрын

Thanks for the info guys

@erikbender1 3 жыл бұрын

my half inch nipple leaks. I am using teflon tape and pipe dope . how do you get it water tight ?.

@atshelp 3 жыл бұрын

erik Bender lots of tape will usually do the trick. Only other tip I can give is the nipples have the hex on the inside if you can get a screwdriver big enough to fit in the groove to get it really tight. If all else fails, pipe dope. But I’d just layer up on the tape to be honest.

@firesurfer 4 жыл бұрын

Thanks. Are there any small backsplashes with a platform available for the new t&s? (half round)

@atshelp 4 жыл бұрын

fire surfer, are talking about wall mounted versions of these like the B-1200 or B-1205?

@firesurfer 4 жыл бұрын

@@atshelp I want to use the wall mount version as freestanding and put the threads through a curved piece of stainless, then to an elbow and pipe that goes down.

@markschlerf8460 4 жыл бұрын

In my commercial kitchen, are the ceramic stems and compression stems interchangeable? In other words, can I swap over to the easily repairable compression and not have to buy the whole ceramic cartridge every time I have a leak?

@atshelp 4 жыл бұрын

Mark Schlerf depends on the brand of faucet really. Most brands try to make things universal. But it’s not always the case.

@swank1975 4 жыл бұрын

outstanding!!

@atshelp 4 жыл бұрын

Why thank you.

@loosemouthcowboy4790 4 жыл бұрын

Snow shovel new way of opening and closing drain = Best practices = Hilarious.

@atshelp 4 жыл бұрын

Loosemouth Cowboy sadly we’ve seen MUCH worse 😂😂😂

@ngodline12 5 жыл бұрын

What do you do if it leaks between the eccentric adaptor and the brass nipple?

Ең жақсы KZbin

Пікірлер