With this upgrade for Spektrum DXS can i fly a plane with a Vtail that uses elevator / rudder mix?

so to use that porgram you will need a USB programmer , WHY dosn´t you say that at first

so to update that, you need the USB cabel sold sepratly.

My setup are as followed: Flight mode 1 is AS3X setup using the Gain nob to adjust the roll and pitch, also to rotate counter clockwise to turn off the AS3X if desired. Flight mode 2 for safe select self leveling and Flight mode 3 for Envelope.

Note: If the plane does not support specific features of the new AS3X+ then those menus under Forward Programming will be hidden. E.g. The Viper 90 does not support Nosewheel Stabilization nor Hand Launch Assist and so those menus will not be displayed when using the Preset files. I would guess that the Eratix might support Hand Launch Assist so that menu item might be visible. It certainly will not support Nosewheel Stabilization and so that menu item will not be displayed. I've confirmed this with Spektrum.

Mine atill wont work

Thanks for the videos that are very useful. I have two questions: 1 I forgot to activate the gain channel select I can't find how to do it. Is there a way to do it and how? 2 - On the Gyro Setting menu there is "Gyro System" editable 1,2,..... I don't understand what it is for and I haven't found it anywhere. The radio is the new NX 8 + the AR10360T SMART 10 ch AS3X SAFE receiver. Can you give me some advice? Greetings from Italy

9985 Chelsie Extension

I've got an E-filte Viper 90, a few years old. It has an AR637TA. I updated my Tx to 4.0.0A. I updated the Rx to 3.01.03. I then loaded the AS3X+ Rx Preset for the Viper 90 into the Rx from the Spektrum Programmer and then loaded the Tx Preset from the Rx into a new Model on my NX10. I do not have any new menu items...e.g. Nose Wheel Stabilization. I then Reset the Rx from Forward Programming, and put the Preset back into the Rx. Still no menus. I'm wondering if the Preset hides all the new menu items.

Thanks for some great videos! Since this receiver has a di-pole antenna, you didn't mention how it should be installed. There is a lot of controversy on this on the forums. The receiver instructions don't mention it either. Just would like to know what the manufacturer recommends. Thanks!

002 Rippin Ridge

is there a video or instructions for updating the device and batteries?

I've got an E-filte Viper 90, a few years old. It has an AR637TA. I updated my Tx to 4.0.0A. I updated the Rx to 3.01.03. I then loaded the AS3X+ Rx Preset for the Viper 90 into the Rx from the Spektrum Programmer and then loaded the Tx Preset from the Rx into a new Model on my NX10. I do not have any new menu items...e.g. Nose Wheel Stabilization. I then Reset the Rx from Forward Programming, and put the Preset back into the Rx. Still no menus. I'm wondering if the Preset hides all the new menu items.

Why is Spectrum Programmer software "beta" if it is what is used in production? You want us to use it but you don't want to officially release it?? Version 3.9 yet beta. Makes no sense.

How does this work with dual motors on two channels? Or can it only work with the motors Y connected on common channel #1?

Latest update of the files is from July 16. Does it really still have your attention? For owners of a AS3X+ receiver the best thing to do is download and install the old AS3X files? What is the difference?

I have a 6e and bound to a Carbon Cub. In the Safe mode the down elevator moves so little that it is very hard to bring the plane down for landing. But out of safe there is no problem. Any thoughts

If hardly anyone could use the 2X or 4X AS3X sensitivity multiplier, why the heck did you increase the gain of the algorithm to where you needed to add 0.25X and 0.5X? Is there really a need for 5 sensitivity ranges? I don't like having to turn my gains down from what I've been using or change the multiplier from 1X to 0.5X. With the AR636, I could set the heading hold gain to the same value as the AS3X gain and not have any problems. With the Smart receivers, I might set the AS3X gain to 40%, but I can't use more than 10% for heading hold. And then there's Stop Lock and Stop Release. I don't like having two more adjustments for each axis in every flight mode. I wish you'd release a 3.x to 2.x conversion firmware so we can go back to what we had. The only good thing you've done since the AR636 is change the default SAFE gain from 18 to 35. I like for my gains to be between 30 and 50 percent with the gain sensitivity set to 1X. I used to say that the Spektrum engineers did everything the way I'd do it, but I don't feel that way anymore.

Everytime I try update my receiver, it says " file was not a sax file." How do I fix this ?

Is there a way to change the voltage output of the AUX Chanel?

Hi everyone, I binded the AR636A receiver with the new NX8+, the controls works but when I go to forward programming the radio lights up red and responds connection failed. I tried to activate the SAFE as the manual says (crossing the Sticks and moving the switch 5 or more times), but it doesn't work. I must say that with the old DX7S, even with some difficulty, I managed it. I'm in crisis.. Do you have any advice? Greetengs from Italy.

what exactly does this do? just set the as3x settings to suit to model? there isnt much to set you could just have the figures written out and we can input ourselves?

Good video and each step explained! thx 👍

how do you hook up the servos when the receiver is in

What about starting with the planes that you sell the most of? Turbo timber evo, aeroscout? Surely those files would be used more than the eratix? Can I request the commander be one to do?

I have an NX10 you lost me at setting the gyros to 75%. I have no idea how to do that on the NX. The NX gyro menu looks nothing like the IX gyro menu

“Ready to fly in no time”. I’m computer illiterate. I thought I could buy the HH carbon cub s 2 1.3m with NX8+ transmitter and just download the file with the transmitter on WiFi. Now THAT would be nice. I am still loving the new plane. Just looking for an easy way to switch from my rtf Tx to my nice NX8+.

Nice upgrade! The change log says "custom sounds" function. Is it now possible to add additional sounds to the list? How is it done?

Update process is still far too hard for a lot of typical users - therefore they will not get the benefits. Until this is resolved Spektrum will always be behind.

AS3X+ is AMAZING! Very, very stable flight and FANTASTIC slow flight and landings! Thank you Spektrum!!

“AS3X+ is taking the world by storm”. Pretty bold statement. I’ve converted my Rxs to as3x+ and in no way am knocking it.

You do realize that you currently have a grand total of 3 preset model files for AS3X+, right?

Question = I have a DX6 Rugged and I’m trying to bind to my ax24 with the Furitek mini Komodo is there a trick to it ? The stock receiver blinks fast but doesn’t connect to the transmitter 😊

does it work with a a-10 thunderbolt?

Please click "...more / Show more" for links and more information. Visit www.horizonhobby.com/blog-article-plus-firmware-update.html for more information on AS3X+. *It is important to note that your Spektrum receiver MUST be updated to AS3X+ before following this video, learn how to update your Spektrum receiver to AS3X+ here: kzbin.info/www/bejne/lXzZZIukZ5hklas Access the Spektrum File Share Drive Here: drive.google.com/drive/folders/1bXQyviRgJW-T0LxOTcCopg61QyaXSfN5 Download the Spektrum Programmer App Here: spektrumrc.cachefly.net/apps/spektrum_programmer.html AS3X+ setup has become even EASIER for select BNF aircraft with AS3X+ and SAFE Preset Model Files! These Horizon Hobby brand BNF aircraft have been expertly tuned by seasoned pilots at Horizon Hobby and Spektrum, and have been uploaded to the Spektrum RC File Share Public Drive for everyone to enjoy. This video teaches how to properly get the AS3X+ Preset Model Files loaded into the Spektrum receiver of your BNF aircraft. Follow SpektrumRC on Social Media! facebook.com/SpektrumRC/ instagram.com/spektrum_rc/

☠BLACK BARON☠0:57 ... Min and Max RPM ... is it the RPM of the KV Motor used with 6S or 12S or is it the Main Rotor RPM using the specified "ratio" of motor pinion gear / main gear? Can someone please clarify? Thank you ... Brand Management.

Hi can you do one four a lossie promoto MX staring end points much appreciated

What happens during calibration light dims not go off

How do you put a color picture of your model on the screen.

Deion Lock

Based on everything I've read, once the DX Tx models been updated to FW Version 2.11, they will be able to use the AS3X+ FP features. If your Tx is still on FW versions prior to 2.11, they will of course be able to use FP of the AS3X non Plus (+) Rx versions and the Nose Wheel Steering and Hand-Launch features of FP, but not the other AS3X Plus features. The DX models do not get the 20 channel capability update the NX and iX Txs get with the exception of the iX12 I believe. The DX models only get the AS3X+ update once they're updated to FW 2.11, supposedly the last DX software update.

Very nicely done and informative video! But, why in the Wonderful World of RC would someone design the Avian 80A ESC for 8S, yet design the Avian 100A ESC for ONLY 6S?!? (I will be SMH and LMAO at Rektum’s idiocy for years to come!)

Cell phone and computer are instantaneous. Nice try.

I need Help with my new IX20 sept 16, 2024 this is my secound radio first one would not charge only make the screen to display green and yellow lines and sound like it was got to do something bad. I have the new radio and wow it charge normal, seem to work good but I am going to fly my cheepest models before the 20,000 models. but the help iI am hoping for is Y dose the touch switch not work after 2 hours of trying to make sure it was porgram correctly. I am hoping in can get help from someone , Horizon supprot said that is just to bad we are not going to exchange to it for a new radio if you want is to fix you are going to have send it back in your dime.

Could not transfer the listed conscendo file. the Spektrum programmer says the consendo is on an SRM file and not a SAX file. Dragging onto Spektrum Programmer isn't taken.

Rahul Field

wow i cannot express how much i hate that you need to register in order to update so they can target ads and crap. disgusting from what used to be a family friendly RC company

O'Conner Extensions

Can I update a dx6?