Might do this with a 30" Ariens and 16hp briggs vanguard. The old EFI engine would run, but all the electric computer junk got fried.
@ogronas2 ай бұрын
@@M.TTT. Do it! It is a lot of fun.
@CainNewtonWork20242 ай бұрын
Super awesome
@jamesbondero61707 ай бұрын
How is the friction disc holding up?
@ogronas7 ай бұрын
No problem, the machine is not much heavier than stock.
@glennlevesque63309 ай бұрын
Much respect on this build the Ariens was a good choice. I myself have a custom Craftsman 45" vtwin I'm trying to finish up some issues I ran into. Like changing impeller pulley size smaller diameter and also double belted too you then have to change the pulley brake configuration too. Also putting a side mounted muffler on you then can't use the handle to housing brace for that size. Another thing being a Honda GX690 nobody makes any performance parts and they say it's governed electronically and mechanically and there's nothing that tells you anything on what to do. I think the problem is solved l think for every issue including the governor
@vassdalencustom8689 Жыл бұрын
Tøft prosjekt! Artig å se flere bygge om gammle ting slik at de blir brukbare 😎👍🏻
@jacquespoirier9071 Жыл бұрын
basically, all these type of snowblowers are underpowered, by swapping with a slightly bigger engine, it makes a world of difference to my experiencel, when doing such a power increase, it is necessary to add some weight to the front of the bucket to avoid the blower climbing on the snow instead of biting in., I done something similad and I had to add 60 lbs to the front of the bucket to control the climbing action. very good project
@M.TTT.2 ай бұрын
good tip
@thomasmihm8125 Жыл бұрын
Tim Taylor of snow blowers lol
@chackos123 Жыл бұрын
Well.............if I hear news reports about it snowing on the moon.........I'll know how it got there. Well Done!!
@ikswotianop Жыл бұрын
thatll eat newspapers for breakfast
@kjell-richardlvdal373 Жыл бұрын
Ja, det var snøfresen sin.
@InfusionFotoMpls Жыл бұрын
You forgot the wheelie bars.... Monster truck of snowblowers!!!!
@SVW1976 Жыл бұрын
🤣👍
@gtmorgan6864 Жыл бұрын
😮😂I think you could have gone with a smaller engine. Unless you’re intention was to send the snow back where it came from. 😂😂
@ogronas Жыл бұрын
Only reason to go with 27hp is because my dad is building one with a 24(?) Hp Onan engine. Orginal plan was a used 22hp Vanguard, but it got sold just in front of my nose so I had to buy a brand new engine.
@gtmorgan6864 Жыл бұрын
@@ogronas I just blew up the engine on my 30 years old toro and was thinking about putting a new engine on it but not as large. we done I enjoyed watching.
@justin113098 Жыл бұрын
How has the auger gearbox held up after some use?
@ogronas Жыл бұрын
Hi, Unfortunatly I have not been able to test it that much, due to little snow, plus I have a contractor to plow for me. I think the hearbox will hold up just fine. It is very solid compared to many other blowers I have seen. The sheer bolts on the augers on the other hand has big problems staying in one piece...
@mikemullen3824 Жыл бұрын
Looks like you’re able to measure your snow throwing capability by zip codes instead of feet! Well done!
@robsteinhaur221 Жыл бұрын
OMG, you’ve taken the reconditioning of a snow blower to a whole new level. Well done.
@harryharry3193 Жыл бұрын
I like it. where did you find that double pulley with the dive pulley all in one? part number?
@ogronas Жыл бұрын
Thank you, the drivepulley and augerpulleys are seperate pulleys. I orderer them from surpluscenter.com. Drive pulley is standard size but I willreplace and increase diameter for more drive speed. Auger pulley is 4,5" if I remember correct. This will almost double the auger speed from 1100 to 1800 rpm with 3600 rpm engine speed. www.surpluscenter.com/Pulleys-V-Belts/Finished-Bore-Pulleys/
@voronezhpokos Жыл бұрын
💪👍
@moskusiskogen2 жыл бұрын
veldig bra video Øystein :)
@stixnfeet78184 жыл бұрын
So, you could rotate and snap lines?
@stiggressgard85234 жыл бұрын
Hvilken bil kjører du ? Dodge med 5.9 cummins diesel ?😊
@ogronas4 жыл бұрын
Ja, stemmer
@ailynschannel29314 жыл бұрын
I like the snow ❄ 🙋♀️🙋♀️👆👆❤
@lofman4 жыл бұрын
Nice machine! Do you have any information about it?
@ogronas4 жыл бұрын
Hi, thank you. Here is a link to mye build»blog». Judging by your name I assume you understand norwegian :) www.maskinisten.net/viewtopic.php?f=98&t=313799 Short version, its a 120x80x700 cylinder mounted on a IPE beam. Original plan was to power from the aux-outlet of the excavator, but I have aquired a 16hp engine and a 22gpm 2-stage pump. I need to build a hydraulic tank and the. This will be a selfcontained unit.
@rixtrix114 жыл бұрын
Good to hear no damage was incurred! Sure looks cold there. It was 81F in Chandler Arizona USA yesterday
@M-S904 жыл бұрын
Rotator works good. What do i need to make a rotator like that? if you can send me a list.
@helipilot70554 жыл бұрын
Are you going to make it tilt?
@ogronas4 жыл бұрын
No, would be to heavy and tall.. Need bigger machine..
@helipilot70554 жыл бұрын
This guy has one on a similar machine...twitter.com/olliegunns
@Thenorwegianlightchaser5 жыл бұрын
Ja, sånn e vinteren i Tromsø by 🙈 D slår aldri feil. Og spesielt i Langnesbakken 🙈
@plommemannen12375 жыл бұрын
Bh. B
@rixtrix115 жыл бұрын
You build such cool stuff, but I think your power source is a bit of overkill, LOL! (rixtrix1 from Garage Journal)
@ogronas5 жыл бұрын
Thank you. The powersource is not that powerful really. I think the little excavator is 25 HP or something. Its just a very big and heavy power source :) Will use this winter to gather parts for a dedicated hydraulic power unit.
@thomasjackson41645 жыл бұрын
Great work on testing. Valuable tool.
@toonybrain5 жыл бұрын
Genius! When will they hit the market? LOL
@felixcat93185 жыл бұрын
That's a very light, compact and capable device you've created. How was it do design and build?
@ogronas5 жыл бұрын
Thank you, the grapple itself was bought. Its a copy of the well proven swedish Dalagripen. The weak spot was the axle running through the gearbox. It bent when handling long heavy objects like my boat trailer.
@helipilot70554 жыл бұрын
@@ogronas Do have any Pictures of the build?
@ogronas4 жыл бұрын
@@helipilot7055 www.maskinisten.net/viewtopic.php?p=4144523#p4144523 Same link to the two other rotators I have made.
@rixtrix115 жыл бұрын
Wow! Didn't know you had dragracing so far north! (Rixtrix1 from Garage Journal)wow
@rodi19516 жыл бұрын
Super!
@123887536 жыл бұрын
kzbin.info/www/bejne/iXfSlouta8djmdU
@andtvekanalen64536 жыл бұрын
0:30 baklengs nedover 😨
@ketilkarlsen83856 жыл бұрын
Men hva i alle dager, ble det sluppet av folk fra bussen da den stoppet?
@AgentSmith9117 жыл бұрын
Hvorfor har bussene i Norge så elendige vinterdekk? Eller er det helårsdekk?
@Beruang07077 жыл бұрын
Det er Nobina vi snakker om her....dem vet rett og slett ikke hva dem holder på med.
@Snergenflergen6 жыл бұрын
Disse bussene var opprinnelig ikke tiltenkt Tromsø, og hadde derfor en tendens til å bytte gir og bytte mellom elektrisk og diesel i glatte bakker. Det ble fikset etter at dette skjedde. Kan også nevne at hjulbrønnene var for små for a ha kjetting på dekkene da bussene kom til byen, så de måtte ordne det også.
@trainpuntnorway55086 жыл бұрын
Helårsdekk. Nobina leier dekk fra andre selskaper
@dillerud957 жыл бұрын
ikke særlig ålreit når det der hender gikk det greit med de involverte
@SSEnrich7 жыл бұрын
Som bergenser blir man mobbet for været. 20 ganger heller regn fremfor dette dritet her. Har hørt de bussene er vanskelig å ha med å gjøre på det føret som ofte er i Tromsø.
@Masterseven778 жыл бұрын
where did you get your injectors from?
@ogronas8 жыл бұрын
These are CPP VCO injectors. It turned out that one of the tips had cracked and could not keep pressure. Jamie(?) at CPP sent me brand new SAC injectors free of charge as warranty.. I am very happy..
@Masterseven778 жыл бұрын
hey man how do you like this turbo
@ogronas8 жыл бұрын
I like it. Makes plenty of power, but can be a bit to big for towing in my area with lots of hills...
@AndersonERockefeller9 жыл бұрын
Ever found what the problem was?
@ogronas9 жыл бұрын
Yes, it was a cracked injector tip.These were 150 HP VCO injectors from Cumminsperformanceparts.com. They sent me a new complete set of injectors free of charge.
@AndersonERockefeller9 жыл бұрын
Nice! Wish all company's are that loyally and stand behind their work.
@DashcamDrenthe11 жыл бұрын
May I use this video for my best of european dashcam?
@ogronas11 жыл бұрын
Yes, no problem. Please send me a link to the finished video :)
@DashcamDrenthe11 жыл бұрын
THX, I will :)
@DashcamDrenthe11 жыл бұрын
I have got another question, do you know some other norwegian dashcam users?
@ogronas11 жыл бұрын
No, sorry...
@DashcamDrenthe11 жыл бұрын
Ok, no problem :)
@SC2Spectre11 жыл бұрын
Derfor æ har kjøpt mæ Patrol :)
@DRRS77711 жыл бұрын
Ulykke og ulykke... du har en relativ definasjon på ulykke når du kaller dette for det!! må inrømme at jeg fikk en liten latter ut i opptaket. :) bra opptak!
@eiriqs11 жыл бұрын
6.37 høydepunktet
@khayer54287 жыл бұрын
hahaha glatt shø
@tdogdogy848211 жыл бұрын
deven får en kuk hest av nobina som faen ikke kan kjøre buss ;(
@senjalars11 жыл бұрын
Som bussjåfør, og tillitsvalgt, vil jeg berømme deg for din snarådighet og assistanse til bussjåføren. Jeg er også imponert over at du har tilstedeværelse til å sette på parklys da du rygger for å unngå bussen som seiler. Svært godt jobba!
@emmanuelgrey16893 жыл бұрын
i know I'm kinda randomly asking but does anybody know of a good site to stream new series online ?
@rayanbraydon533 жыл бұрын
@Emmanuel Grey lately I have been using Flixzone. You can find it on google =)
@keenanmiles8433 жыл бұрын
@Rayan Braydon Definitely, have been watching on Flixzone for since april myself :)
@emmanuelgrey16893 жыл бұрын
@Rayan Braydon thanks, I went there and it seems like they got a lot of movies there =) I appreciate it !