Where did you find the remote wire to? Is that what you plugged into the rear speaker?
@rotheinstaller23 сағат бұрын
@robertoperalta633 my amp, has a smart turn on feature. In my video, my remote wire would be from the speaker signal, which you saw in the video. If you are gonna use my method of wiring, I'd recommend tapping into the front speaker for a strong output signal to the amp, which results in a stronger output from the amp.
@angelapps927Күн бұрын
where to buy?
@rotheinstallerКүн бұрын
@@angelapps927 link is in the description
@32dWater2 күн бұрын
Doesn't this change the direction of the sensor? I guess it still works correctly? Or is there a calibration that should be done after install...
@rotheinstaller2 күн бұрын
@@32dWater works just the same as before
@nickgangemi17876 күн бұрын
The tape for the accord logo is genius. One thing I'd suggest for anyone though. Bring a level with you to make sure it's actually straight
@rotheinstaller6 күн бұрын
@@nickgangemi1787 thank you!
@nickgangemi17876 күн бұрын
@rotheinstaller Thank you for making this. Get my 24 accord tomorrow and already ordered the badges. Was looking for an essy way to apply the accord logo. This is perfect!
@rotheinstaller6 күн бұрын
@nickgangemi1787 you're welcome. I'm glad this was of help to you
@gamblersstory90817 күн бұрын
Sorry if this is obvious but how do I adjust the aim of these fog lights? Thank you
@rotheinstaller7 күн бұрын
@gamblersstory9081 the adjustment is on the side of the light fixture facing down. You need an allen key to perform the adjustment. The area is at the bottom
@kiingtez-64518 күн бұрын
What color and location am I looking for hooking up my line output converter to the front speaker
@rotheinstaller8 күн бұрын
@kiingtez-6451 front right is easier to get to. It is located under the dash. In the door connection... I don't remember the color wires, remove the speaker to know the correct colors to tap into
@iamerikr9 күн бұрын
If someone drove to you - would you do the install ?
@rotheinstaller9 күн бұрын
@@iamerikr yes I do installs. Where are you located?
@iamerikr9 күн бұрын
@@rotheinstaller straight down 65 in Nashville.
@rotheinstaller9 күн бұрын
@@iamerikr I'm in Chicago
@iamerikr9 күн бұрын
@ I’d literally drive to you to get this done right Are you on any other platforms so I could DM you?
@rotheinstaller7 күн бұрын
@iamerikr ok. That's fine. I do charge for installs. DM me on Instagram @ro_g90
@coldmoney7779 күн бұрын
Ordered the last one in stock on ebay today lol got lucky
@JSTNABRA12 күн бұрын
Have a 2025 CRV Hybrid sport, Followed this exact installation but lights still dont turn on. Any suggestions?
@rotheinstaller12 күн бұрын
@@JSTNABRA Check the ground by the bumper. Make sure it's metal to metal. Some areas look like metal, but it's not. Just helped someone with the same problem.
@JSTNABRA12 күн бұрын
the only thing i did not do was replace the OEM stalk..
@rotheinstaller12 күн бұрын
Message me on Instagram. It's in my bio
@joemontalvo5013 күн бұрын
Do the have that kit for 24 Honda HR -V good job looks much better
@rotheinstaller13 күн бұрын
@joemontalvo50 sorry but the hrv does not have fog light option
@joemontalvo5013 күн бұрын
@@rotheinstaller thanks buddy ok
@wingkeungngan8516 күн бұрын
too bad you over Chicago area, any people you know in Boston area you recommend to install that for me?
@rotheinstaller16 күн бұрын
@@wingkeungngan85 I do not 🙂
@carlosmanuelrochecantillo122618 күн бұрын
Brother, where can I buy the kit? It's smoking 😮💨🔥🔥🔥
@rotheinstaller18 күн бұрын
@@carlosmanuelrochecantillo1226 thank you... the link is in the video description
@mlawrence299120 күн бұрын
Thanks again for leading me to this video on the Hybrid install. I liked the light show at the end of the video and it really looked brighter. In real time, when facing the car, do those 35w lights have the same glow of the headlights? I like when both match and not look like one of my past cars did where the headlights were halogen and the fog lights LED. I am looking for a uniformed look.
@rotheinstaller20 күн бұрын
@mlawrence2991 They are LED, so they will be uniform🙂
@mlawrence299120 күн бұрын
@@rotheinstaller thanks
@mlawrence299121 күн бұрын
Have you found that the lights help greatly with improved vision at night? I ask because I know in some cases these lights are just cosmetic in a sense.
@rotheinstaller21 күн бұрын
@mlawrence2991 the ones I installed, yes, they are definitely worth getting. Visibility has improved greatly!... I recommend getting them
@mlawrence299121 күн бұрын
@@rotheinstaller do you know if these work on the 2025 CRV Sport L Hybrids 2WD? Just want to make sure as I know sometimes although the vehicles look the same, somethings are still different. Thanks for your earlier response.
@rotheinstaller21 күн бұрын
@mlawrence2991 they do work. You would have to relocate the parking sensor tho. I have the hybrid video on my channel as well
@harleymaupin260721 күн бұрын
Hey bro so I have a question I'm hoping you can answer for me. I have a 2022 honda accord touring hybrid and I wanna put a system in it. I called Luckys idk if y'all have a luckys where your from or not but they do like audio, tinit other things. Anyways they quoted me on an installation and it's for a 1200 watt audio pipe system they said they could do for my car. I was wondering if it's safe to do or not bc I've read that you don't want anything that's too much power bc of the hybrid system sensitivity. I just want a better bass sound. Great video btw. Thanks
@rotheinstaller21 күн бұрын
@harleymaupin2607 so i heard the same thing and kept that in mind when doing mine. You need an efficient amp, meaning the amp doesn't pull alot of current, which would be better for the system. I think audiopipe is one of those amp that is not efficient. I'm really not sure, that's why I use kickers. They have great efficiency on the new amplifiers, I'm running an 800 in my car, and it sounds great
@JUSTINNNNare22 күн бұрын
Where did you get the pin that goes into the head light stalk harness ?
@rotheinstaller22 күн бұрын
@JUSTINNNNare think you can get it on Amazon. Not sure where I got it
@JUSTINNNNare22 күн бұрын
You know the size ?
@rotheinstaller22 күн бұрын
@JUSTINNNNare i do not
@JUSTINNNNare21 күн бұрын
Bought the terminal kit on Amazon. Nothing in the kit fits the stalk terminal. Any help ?
@rotheinstaller21 күн бұрын
@JUSTINNNNare a.aliexpress.com/_mMMQ4QM. Try that link
@kedronmarsh177324 күн бұрын
That was quick and easy
@rotheinstaller24 күн бұрын
@@kedronmarsh1773 that it is
@Jhou2824 күн бұрын
Dumb question but how does this work with the auto-high beam feature? Do the fog lights still stay on when high beams are on?
@rotheinstaller24 күн бұрын
@Jhou28 Yes, it stays on full time
@billy-jamesparadis456626 күн бұрын
That amazon link you sent us looks completely different than the one in the video. Do you have a more specific link?
@rotheinstaller26 күн бұрын
@billy-jamesparadis4566 i just checked it and it is the same one in the video
@billy-jamesparadis456626 күн бұрын
Thanks so much for your help by the way but it looks like the wire that's attached to the port is hard wired where it looks like that wire on the amazon site has a usb female port or do you just connect that to the shell?
@rotheinstaller25 күн бұрын
@billy-jamesparadis4566 Yes, just slide it in the shell. That's all i did.
@billy-jamesparadis456625 күн бұрын
Oh thats great! I couldnt tell in your video so thank you and another thing, your video is appreciated so much because I went and asked Mikstore from the Philippines about their kit and they said it couldnt be done without losing the passenger air bag illumination sign so its been very nice to see you were able to do it and provide all the correct part numbers so thanks again! @rotheinstaller
@billy-jamesparadis456625 күн бұрын
Don't know if you'd be interested in this wireless phone charger but I am because the one that comes from the manufacturer is too small to fit my Samsung S21 Ultra w/case...any plans on making videos of something similar?
@franksalazar9342Ай бұрын
I got a civic si 2022 and bought and 1 aftermarket headlight (driver side), it doesnt turn on,, just directional ,, check interior fuse box it is fine.. what could it be?
@rotheinstallerАй бұрын
@@franksalazar9342 the headlight itself might be defective.
@xulisvoosmuasАй бұрын
Do your parking sensors work ok after moving them?
@rotheinstallerАй бұрын
@@xulisvoosmuas they work just fine. No problem
@strawdemindsetАй бұрын
Hey you know if this works on the 2024 sport model? Looks the same
@rotheinstallerАй бұрын
@@strawdemindset it does
@guitarplayerdreАй бұрын
What size are those rims and tires plz?
@rotheinstallerАй бұрын
@@guitarplayerdre 19×8.5 & 245/40/19
@xulisvoosmuasАй бұрын
Where can I purchase the body colored sensor?
@davide1621Ай бұрын
Very nice installation. I ordered the kit plus the sensor relocator kit. Once the sensor is relocated, how do I get the sensor wire connector attached to the sensor ? Do I need to cut some of the plastic housing away ?
@rotheinstallerАй бұрын
@davide1621 yes. Only cut the area i showed in the video. Do the wiring like i did in the crv ex video if you will be using the oem stalk
@xulisvoosmuasАй бұрын
Can the parking sensor be placed above in the body colored area instead? I see in some photos it can be. How would you do that? Do you need a body colored sensor?
@rotheinstallerАй бұрын
@xulisvoosmuas yes. It can be placed in the bumper as you see in the pictures. Also, yes, you would need the body colored sensor, which is not available in the U.S. you would also need the hole punch tool to make the new hole.
@xulisvoosmuasАй бұрын
Where can I purchase the body colored sensor and hole punch tool?
@rotheinstallerАй бұрын
@xulisvoosmuas i know College Hills honda sells the kit, but I'm not sure if they will sell just the sensor. Punch tool from mikstore
@xulisvoosmuasАй бұрын
Ok thanks. Also, will these sensors (from college hills) work with factory parts?
@rotheinstallerАй бұрын
@@xulisvoosmuas I'm not sure. Reach our to their service department for more info
@BrandensOutdoorChannelАй бұрын
Too much work
@rotheinstallerАй бұрын
@@BrandensOutdoorChannel 🙂
@levy35305Ай бұрын
This was of great help thank you! I had 3 questions. 1. Do you know the pin out for the stalk switch connector, or at least for rear fog? 2. Can you explain why u connected the blue and white cables together? 3.any idea what the pin out is for that 6 pin optional connector on the fuse box module? Thanks so much you really helped me get my fog lights set up very oem like. Thinking of adding rear fog switch but not sure how it will work with start up animation on rear reflectors. Worst case just have rear fog switch set up with something else.
@rotheinstallerАй бұрын
@levy35305 what do you mean by pin out?? 2. I did explain in the video, the blue and white wire connection. 3. I have no idea .
@levy35305Ай бұрын
@@rotheinstaller sorry I just meant what each of the connector pin is for you knew that the pin next to the dark green cable was for front fog lights so was curious if you knew what the rest were. Like for rear fog , turn signals, high beam, low beam etc. For 3, how did u know that pin on that connector was for driving lights?
@rotheinstallerАй бұрын
@levy35305 I don't know what the other pin slots are for... all the info I share, I learned from someone, or experimented on my own car. You can hit me up on IG if you got more questions or if you need more clarity on the setup
@LenrageАй бұрын
Hi again. Order the same kit as you. There are on the way. I want to know if i decide to install the button and the stalk switch together, where are the wire have to connect. Black: Stalk.....White: DIY Plug, but the Red, where ?
@rotheinstallerАй бұрын
@Lenrage your red wire is your 12v. Just connect it to a 12v source.
@dennislegaspi2816Ай бұрын
So the ground wire work as a switch?
@rotheinstallerАй бұрын
@dennislegaspi2816 the switch activates the ground
@dennislegaspi2816Ай бұрын
@@rotheinstaller thanks😊
@jimmyjameson8705Ай бұрын
Thanks!!
@parthpatel6251Ай бұрын
Just got the kit. Do the light bulbs not flush along the plastic trim pieces? Any recommendation on the aiming of the fog light, like the setting of it?
@rotheinstallerАй бұрын
@parthpatel6251 No, they don't. The adjustment is on the side. Adjust them all the way down, then check it, and if they are too low, bring them u up a tad bit. Just not too high where it's blinding to on coming traffic
@parthpatel6251Ай бұрын
@@rotheinstaller Ok thanks, Do you know how much you turned it? or are there any recommendations that I can find ?
@rotheinstallerАй бұрын
@parthpatel6251 mine was already adjusted. Didn't have to mess with it
@vinhxle80Ай бұрын
Are they switchback lights? When you use your signals do they change to amber colors?
@rotheinstallerАй бұрын
@vinhxle80 Yes, but I didn't connect the turn signal. Only needed the drl
@Lenrage2 ай бұрын
Very good video. Need more information on how you did the relay hardness together (white and blue). could you explain more about what you did. Would like to do the same, not like in the first video
@rotheinstaller2 ай бұрын
@Lenrage all I did was cut off the push button on/off switch, cut the wires at the relay, but at the length like I have in the video and Join the blue wire to the red fused wire
@Lenrage2 ай бұрын
@@rotheinstaller thanks for quick response. Wound it be possible to keep the switch and still hook it up like you did with the steering wheel lever ?
@rotheinstaller2 ай бұрын
@Lenrage yes, but it is not necessary to have both. You would have alot of excess wire to hide under the dash if you use the switch
@Lenrage2 ай бұрын
@@rotheinstaller perfect thank you.....one last question. Wich one of the lights did you get with the ballast....are these the 35w or 40w. Website not really answering questions. Are these lights leds or bulbs. Thanks
@rotheinstaller2 ай бұрын
@Lenrage I have the 35w, and yes, they are LED .
@Dalmajian2 ай бұрын
Where did you buy the splitter cable?
@rotheinstaller2 ай бұрын
@@Dalmajian amazon. Link is in the description
@Dalmajian2 ай бұрын
Is the splitter compatible with the 10th generation of Civic? I can't confirm it in the description, so I'm going to buy it with AliExpress. Low tone part number, please.
@rotheinstaller2 ай бұрын
@Dalmajian I'm not sure if it works on the 10th Gen. And both part numbers are in the description
@BrandensOutdoorChannel2 ай бұрын
Too much trouble. Just paint it.
@TeeDee-j9u2 ай бұрын
Cheap looking and it's more trouble to paint than replacing it.
@CollinPuckett2 ай бұрын
How would this hold up on an auto wash?
@rotheinstaller2 ай бұрын
@@CollinPuckett holds up very well. I also only use touch less car wash. Just a personal preference
@parthpatel62512 ай бұрын
Did you install the 35W fog lamps or the 40W projectors lamps? Also, after you moved the parking sensors, how well do they operate ?Are they same as before?
@rotheinstaller2 ай бұрын
@@parthpatel6251 35w. They are bright enough for me. They operate the same as before
@parthpatel62512 ай бұрын
@@rotheinstaller with the 35 W is it projector lamp or reflector lamp? I am guessing the 35 W comes with a ballast to plug in so it can lower that much Watts, correct?
@rotheinstaller2 ай бұрын
@@parthpatel6251 I'm not sure what it is. I know they are very bright. I'm also not sure if the ballast lowers the watts
@parthpatel62512 ай бұрын
@@rotheinstaller thanks
@rotheinstaller2 ай бұрын
@@parthpatel6251 get the 35w. It's been working with no issues
@MJ3000Sp2 ай бұрын
My crv headlights are bit deem and wanted to get a bright fog lights to light up the road. Do these fog lights make a difference at night?
@rotheinstaller2 ай бұрын
@@MJ3000Sp they do... I had actual photos at the start of the video. Get the fog lights
@aqechen92002 ай бұрын
i have a 2025 crv hybird with the parking sensor, and there is one sensor in the fog light cover. can I still install the fog light like you did?
@rotheinstaller2 ай бұрын
@aqechen9200 yes you can. Watch my hybrid video to see how it's done
@ZavierMarquisOwens2 ай бұрын
Add some fog lights
@rotheinstaller2 ай бұрын
@@ZavierMarquisOwens already did
@winningsince852 ай бұрын
I’m curious if I can get to them by just taking off the front grille instead of the whole bumper. 🤔 what do you think??
@rotheinstaller2 ай бұрын
@winningsince85 I've seen it done once, but the trade-off was alot of cuts and bruises
@andyhuynh79332 ай бұрын
This is not for everyone. Must be professional to install
@rotheinstaller2 ай бұрын
@@andyhuynh7933 I agree...
@eslamelbanna61452 ай бұрын
Hi bro My ciciv Comes with front dual USB-A , is there's a way that i can change that to USB-C, if yes can you pls Send my the Parts' link to buy?
@rotheinstaller2 ай бұрын
@eslamelbanna6145 I don't think you can change it
@dwightstephenson17492 ай бұрын
This is the best foglight install video out there most people just focus on bumper removal but noone tells you how to correctly wire the harness into the car .Thank you for your detailed tutorial
@rotheinstaller2 ай бұрын
@@dwightstephenson1749 😎😎
@Winny5612 ай бұрын
Very nice, would've loved to see B roll footage comparison of a before and after at the end
@malimario6572 ай бұрын
Sound (AFTER Low Note HORN install) *@**5:45*
@richardslaght24572 ай бұрын
I would like to see you install seat risers on the CRV passenger seat. It really sits too low. Have not found anyone making a kit yet?
@rotheinstaller2 ай бұрын
@richardslaght2457 I'm not sure that kit exists. This is the first I'm hearing of such kit.