CIVIC HB REAR USB!!!!

[@Ed_sulieman]

You're the only person making helpful 11th gen install vids, keep it up!!

[@rotheinstaller]

I really appreciate that 🙏

[@testpython3575]

Just got a '24 civic sport hatch and will definitely be doing this in the future. Thanks for the video!

[@Loso0523]

Nice job I found this install actually easier than the front

[@rotheinstaller]

@Loso its alot easier. only making the harness was a bit tedious

[@NamNaz]

Thank you for videos. They are very helpfull!

[@rotheinstaller]

You are most welcome! Thank you for watching, I appreciate it

[@npittari]

Ro, fine job producing another detailed step by step video. Honda should have included these ports in all trim levels.

[@rotheinstaller]

Thank you! I agree, I think honda made a big mistake by not including at least 2 usb ports.

[@NamNaz]

We have in Europe this ports in all trim levels.

[@rotheinstaller]

@@NamNaz lucky! In the USA we always get the bad end of the stick.

[@trhoads0503]

Excellent job Ro!! I’ll keep watching your uploads you’re always teaching me something. Have you ever thought about trying to replace the rear view mirror with an auto dimming one like the touring has? No one has made a video on it yet but it’s something I’d really like to do.

[@rotheinstaller]

Thank you for those kind words. You're the second person to bring that to my attention. I bought an ultra mirror on Amazon and just put it over the factory mirror (clip on).it is already designed to work against the bright light at night without being expensive and technical to install. I can send you the link for it, just to see if you like it.

[@trhoads0503]

@@rotheinstaller yes please, I’d appreciate that! Feel free to send me the link, if you have an affiliate link I’ll use that to buy as well. Keep up the good work man you’re rocking it!

[@rotheinstaller]

@@trhoads0503 (Upgrade)SkycropHD Anti Glare... www.amazon.com/dp/B091BXRCQC?ref=ppx_pop_mob_ap_share

[@rotheinstaller]

​@ricenoodlezz I've been getting requests for the home link mirror, and I think I'm going to honor the request for you guys...

[@trhoads0503]

@@rotheinstaller 😲😲😲 I can’t wait!!! 🤗

[@tydacosta205]

I’ve done plenty of mechanical mods/changes over the years to my cars, but stayed away from electric. Thanks for detailed vids man, keep them up! Question about power supply though, will the circuit feeding that 12v cigarette lighter really be able to support all three additional USB chargers at once? Just wondering if there’s another circuit I could tap into that would be dedicated for the rear?

[@rotheinstaller]

@Ty DaCosta That circuit can more than handle the additional usbs. It can handle 180w max these usb together is not even close to 30w, maybe 25w max. Remember that's the raw 12v coming into that socket and whatever you plug into it has its own break down circuit to power or charge whatever device you are using, so that you don't burn it up. Hope that helps to give you a better understanding.

[@Mcbebblestin]

Awesome man. Have you considered installing the EX-L hatch wiper stock so we can get true intermittent wiping speeds?

[@rotheinstaller]

@McBebblestin I haven't thought about that. I will look into it tho

[@tazwav5973]

Love the content bro! Where are you located?

[@rotheinstaller]

@tazwav5973 Thank you! I'm in Illinois

[@Nitrofish72]

Hi. I ordered the part # you supplied for the harness. The harness I received has 3 connectors . Did you cut 1 off before you started video? Thx.

[@rotheinstaller]

@rickkolczak8429 I did remove 2 of the connectors and rebuild 1 with the connectors I purchased from Amazon. The 1 I rebuilt was the end to get the 12volt from the car.

[@Nitrofish72]

@@rotheinstaller Cool. Thank you for your response.

[@rotheinstaller]

@rickkolczak8429 no problem, anymore questions just hit me up.

[@Tobsens_Tobi]

Hi, do you can help me with the pinout? I doesn't have the whole harness I only got the connector and would make it by myself. Do you still know which pins are + and which are -? Thank you

[@rotheinstaller]

@Tobsens_Tobi I honestly don't remember where the wires go. I never de-pin the connector

[@Tobsens_Tobi]

@@rotheinstaller ah ok no problem. I just thought I ask you maybe you know which pins are ground

[@Tobsens_Tobi]

@@rotheinstaller EDIT: I got it 👍 2 + wires are for the port and one for the light. For anyone who got the same issue -> wenn you look at the module connection from left to right, 1 - light 2 + light 3&4 + USB 5 - USB

[@eslamelbanna6145]

Hi bro My ciciv Comes with front dual USB-A , is there's a way that i can change that to USB-C, if yes can you pls Send my the Parts' link to buy?

[@rotheinstaller]

@eslamelbanna6145 I don't think you can change it

[@JustRiceLeague]

Do you think these parts will work on a 2024 HR-V?

[@rotheinstaller]

@JustRiceLeague I'm not sure...each car uses a different part. You would have to get the part numbers to know which one works with your car