Air can be used for various applications, including guitar and bass. It is worth recording with and without air to see which best fits your taste.

Hi, thank you for reaching out, we're happy to hear you are interested in Clarett+ Octopre. Because Clarett+ Octopre features ADAT in and out, you can digitally route its outputs in Focusrite Control. The preamp is not fully bypassed when connecting to the line inputs because the signal must go through the variable gain section. This is because the Clarett+ octopre does not feature fixed gain inputs. However, this will add minimal color to your signal. As for the inserts, more info on their functionality can be found on page 11 of the user guide which I've linked here: fael-downloads-prod.focusrite.com/customer/prod/downloads/Clarett%2B%20OctoPre%20User%20Guide%20V5%20-%20EN.pdf Please let us know if this helps or if we can answer additional questions.

@@FocusriteTV Thanks for that! I had a read but am still unsure about using outboard effects post recording using the insert jacks. To use gear after recording would I have to just use the line outputs and send the signal back in the normal mic/line inputs or is there a way of using the insert jacks instead of that to save the mic inputs for microphones. Cheers!

Octopre inserts are typically used with the following signal flow: - Send signal to OctoPre's line outputs via ADAT - Connect OctoPre Line Out to Outboard Line In - Apply effects - Connect Outboard Line Out to OctoPre Line In - OctoPre Line In is sent via ADAT Out back to "main" interface

@@FocusriteTV Ok got it, you can't use the insert jack on the octopre to add hardware inserts post recording you have to use line outputs (db25) and the line in preamps. So the function of the insert jack is only for live tracking/recording with hardware and cannot be used as an insert after I assume. Thanks for the replies!

If your amp has a line output, you can connect this directly to your Scarlett, but otherwise, it's best to use a microphone to record your amp.

The multiple air settings are designed to give users various options for mic processing. You should try both and decide which is best for your workflow.

@ Alr I guess I’m gonna enable it. But can I ask u how did u sound so good and clear? I use a good one dynamic mic but still sound bad. Its like when I’m far away it sound weird and bad but some other guys other KZbinr when they far from mic it still clean and good even the same distance.

Are the gain halos lighting up green when you use the mic? That indicates the levels are good. The space where you record can affect the quality of your recordings. If it sounds like you're far away from the mic, you might want to try recording in different rooms or spaces in your home. Sometimes the ambient noise in the room can make it feel like you're farther away from the mic than you actually are.

Generally speaking, your computer operating system can only access and use 1 audio interface or soundcard at a time. If you require an audio interface with 4 mic preamps, you may want to consider Scarlett 18i16.

Hi, thank you for reaching out. The articles below explain how to connect our interfaces to iOS devices. Please let us know if this helps: support.focusrite.com/hc/en-gb/articles/115005430409-Using-bus-powered-Scarletts-with-Lightning-iOS-devices support.focusrite.com/hc/en-gb/articles/360002662100-Can-I-use-my-audio-interface-with-my-USB-C-iPad-Pro

Thanks for your kind words, Chris! It's great to hear that you're enjoying Vocaster 🙌🙏

Thank you for your kind words. We're so happy to hear our devices are serving you well.

We apologize for the confusion. The Hitmaker expansion is available for free to users with a Scarlett 4th Gen, Scarlett 3rd Gen, Clarett+, Clarett USB, or Red interfaces purchased and registered on or after July 1st, 2023

We apologize for the confusion. The Hitmaker expansion is available to users who have purchased and registered a Scarlett 4th Gen, Scarlett 3rd Gen, Clarett+, Clarett USB, or Red interface on or after July 1st, 2023.

Hi, thank you for reaching out, we'd be happy to answer any questions you may have regarding Focusrite Control 2. All 4th generation Scarletts feature loopback that can be configured in Focusrite Control 2. All 4th gen Scarletts (except solo) allow you to link channels and create stereo pairs, and all allow you to combine inputs. As for EQ, Focusrite Control 2 is a program dedicated to remote controlling parameters on Scarlett and does not feature EQ or other processing to not add additional latency or CPU strain. More info on Focusrite Control 2 can be found here: support.focusrite.com/hc/en-gb/articles/13291845720978-Focusrite-Control-2-Mixer

You can connect a phone to Vocaster Two to record a conversation or capture music from the phone. The rear panel features a 3.5 mm TRRS jack socket for phone connectivity. To connect, use a 3.5 mm TRRS cable with the phone’s headphone socket, which is typically a 3.5 mm TRRS port. A 3.5 mm TRS cable will also work, but you may not get two-way communication with your phone guest. If your phone doesn’t have a 3.5 mm headphone port, you can use a 3.5 mm TRRS adapter.

Yes, you can record directly to an iPhone. You can either connect via a 3.5 mm cable from the phone output on Vocaster, or you can connect via USB, as described in the articles below: lightning: support.focusrite.com/hc/en-gb/articles/115005430409-Using-bus-powered-Scarletts-with-Lightning-iOS-devices USB-C: support.focusrite.com/hc/en-gb/articles/360012532199-Connecting-your-USB-C-iPad-with-your-Audio-Interface These articles refer to iPad, but the information applies to all iOS devices.

Glad you found this useful!

48V is not needed when recording a guitar, but it also will not cause any harm if enabled while a guitar is connected. If you connect directly from your guitar to the interface, then yes, you should enable the INST setting. Please let us know if this makes sense or if we can answer additional questions.

@@FocusriteTVThank you so much for responding! I have two microphone cables plugged into the front of the focusrite 4i4 that are being placed in front of two guitar amps. Still should be in instrument mode?

Also, I'm thinking about getting a synth (hydrasynth explorer). My question is can I keep the mics plugged in the front and plug the synth into the 3rd and 4th inputs on the back? So I can record at the same time (for example, laying down a guitar loop and playing the keyboard over it)

Yes, The line inputs on Scarlett 4i4 are separate from the 2 microphone/instrument combo inputs on the front of the device. There are no gain controls for inputs 3 and 4, but these are designed to capture line-level inputs and can be used simultaneously with inputs 1 and 2.

If you are exclusively doing voiceover work, Vocaster may be the correct interface for you for several reasons. -Vocaster interfaces do not have 1/4 inch instrument inputs, which are not necessary if you are only doing voiceover. - Vocaster features enhance presets, which allow your audio signal to be optimized for vocal work. - Finally, the features on Vocaster are designed to especially accommodate vocal applications. These include dedicated mute buttons, auto gain, and Vocaster Hub. More info can be found below, but please let us know if we can answer additional questions. us.focusrite.com/vocaster

The mic cluip included has an industry-standard 5/8” threaded insert which allows it to be mounted on most mic stands. An 3/8” adaptor is included to allow it to be fitted to mic stands that have this thread size.

We're sorry to hear you are having trouble. You can connect Scarlett directly to your iPhone, and record through the camera app, or using the impact app we have created which will give you more control over your sound. More info is here: apps.apple.com/us/app/impact-by-focusrite/id906699552 Otherwise, you will have to sync up your audio and video in a separate program. This article explains some methods to do so: www.shure.com/en-US/insights/how-to-sync-audio-and-video Let us know if this helps, or if we can answer additional questions.

If you need help getting started with your setup, our support team would be happy to assist. If you reach out at the link below, our team can help you get up and running: support.focusrite.com/hc/en-gb/requests/new

Hi, we're sorry to hear you are having trouble. Pro Tools First has been discontinued by AVID but it is possible we may be able to find your plugins. Can you try: Please log into your Avid.com account, once in go to: My Products & Subscriptions > Product Details and Download Links 'Show' > Eleven Lite Installer. Once installed please restart Pro Tools and it should appear in your plugin list. If that doesn't help, please reach out to our support team at the link below for further assistance: support.focusrite.com/hc/en-gb/requests/new

Absolutely. Windows 11 is supported. In fact, all of our current USB audio interfaces, which includes every device in every generation of Scarlett, Clarett USB and Clarett+ ranges, utilise the same driver on Windows which is updated regularly and compatible with Windows 11. Please discuss the problems you're having with our Support Team. With a bit of troubleshooting, they can help you identify the cause - bit.ly/CallFocusriteSupport

Are you having trouble with your interface or some of the bundled software? If so we would be happy to help. Our team can assist at the link below: support.focusrite.com/hc/en-gb/requests/new

While both devices are very capable interfaces, 18i20 4th gen introduces a collection of new features such as auto gain and clip safe, along with audio performance improvements such as 69dB of input gain. The Focusrite Control 2 iOS app will only work with Gen 4 devices as well, more info can be found at the link below. Please let us know if this helps or if we can answer additional questions. us.focusrite.com/software/focusrite-control-2

We apologize that your Clarett+ is not working so far. There is a collection of possible causes for that issue, so it would be best for you to discuss this issue with our support team. If you reach out at the link below, they can get your device up and running: support.focusrite.com/hc/en-gb/requests/new