Ай бұрын
3 ай бұрын
4 ай бұрын
4 ай бұрын
5 ай бұрын
7 ай бұрын
7 ай бұрын
Пікірлер
@iainahastie8658 4 сағат бұрын
The thing with swags is your bedding is all in one. you keep sheets pillows etc. so you roll it out and it is ready to sleep. Even if you don't use the poles (old fashion versions) still ready for sleep. This system is all huff and puff pumping up everything and the way it packs up is not inducive of leaving bedding in.
@Wheelin_2_Adventure Күн бұрын
Great video and humour. Love the handy tips. I definitely can’t wait to have a canopy instead of doing tub life. It will save me taking heaps of shit.
@MudModsBeers Күн бұрын
Thanks mate! I had a tub a while ago on a Hilux, they’re handy for plenty of things but for camping I think there’s not much that can beat a canopy. Thanks for the comment 👍🍺
@masultra Күн бұрын
Awesome! How did you mount the slides ?
@MudModsBeers Күн бұрын
This was awhile ago, but from memory, I used bits of angle and screwed them to the floors and then the slides onto them. Hope that helps mate! Good luck with your build 👍🍺
@Off.Track4x4 Күн бұрын
Great video mate, some very handy tips
@MudModsBeers Күн бұрын
Thanks mate! Really appreciate the comments!
@4x4xplore41 3 күн бұрын
Cool video! I am surprised that you don’t take a chainsaw with you!!!
@MudModsBeers 3 күн бұрын
Thanks!! We do take a chainsaw too!!
@adamdennis7016 5 күн бұрын
OH WHAT A FEELING 😂
@MudModsBeers 5 күн бұрын
Not a truer word said
@alanrydge510 6 күн бұрын
What tyre pressure do you run on 35” loaded canopy 3.8t mate your help will be appreciated
@MudModsBeers 6 күн бұрын
Hey mate, for the road for that sort of load I'd be at 42 PSI in the rears, maybe even 44 .
@stephenmanila3044 7 күн бұрын
Nice build!! Careful of those floor mats, they’ll eat the paint off the bottom of your doors.
@MudModsBeers 7 күн бұрын
Thanks mate, great tip!!
@egi5434 8 күн бұрын
Nice build Nice build! Well done. Would you give bit more info on correction on back track? I wondering how the correction was done..thanks
@MudModsBeers 8 күн бұрын
Hey mate, thanks for the comments! The rear wheels have a -50 offset rim on each side. This helps correct the track.
@egi5434 8 күн бұрын
@@MudModsBeers Thank you so much for your prompt response! awesome! I want to have similar wheel setup for my 76. Sorry what type of wheels they area? How about front (i mean offset)?
@MudModsBeers 8 күн бұрын
@@egi5434 They are steel wheels and from memory I think the fronts are -12 offset, or maybe 0 offset. Any good wheel & tyre shop will be able to help you out wth the offsets to ensure they line up correctly.
@neilmitchelhill9388 3 күн бұрын
I would love ARB flares but they have not been able to supply for over 6 months & cannot provide an ETA
@JRCadventures 10 күн бұрын
Thats so handy! Love it
@MudModsBeers 9 күн бұрын
Thanks mate! Love a gadget like this, no extra room and right at the power source, and a super simple install, big ticks all round!
@explorebound 11 күн бұрын
Woohoo awesome build mate! Nothing better than building something tailored to your needs. Thanks for the shoutout too 🙂
@MudModsBeers 11 күн бұрын
Thanks mate! Watch your channel heaps and love the content! Thanks for the inspiration!
@louiskudlak2256 13 күн бұрын
Used v8 4wd for sale, 1 grandma driver 😂😂😂
@MudModsBeers 12 күн бұрын
Never been off road either!
@JRCadventures 13 күн бұрын
Thats actually wild!
@MudModsBeers 13 күн бұрын
Hahaha, we made so many rookie errors!!! Thanks for watching mate!
@M_sax23 13 күн бұрын
Fu*king hell 😢
@MudModsBeers 13 күн бұрын
Gutted, but 🍀
@grizzly4x4 13 күн бұрын
How many kms had the original engine done??
@MudModsBeers 13 күн бұрын
Just over 400,000
@traderjarz 13 күн бұрын
old saying goes: all the gear but no idea!!
@MudModsBeers 13 күн бұрын
Can’t argue 😂
@PeterGibson-z8f 13 күн бұрын
Has a snorkel, how is that nearly drowned?
@MudModsBeers 13 күн бұрын
Didn’t feel good mate!
@jarrod1687 13 күн бұрын
For sale, mature owner, driven to church on Sundays
@MudModsBeers 13 күн бұрын
Never off road 😂😂
@louiskudlak2256 13 күн бұрын
Remember the 6 p,s, prior preparation prevents piss poor performance, lucky
@MudModsBeers 13 күн бұрын
100% true, we made a couple of big rookie mistakes! We only walked half of it, presumed the other half was ok, and didn't rig up a snatch first for a quick exit. We have driven that same track lots of times with no issues, albeit with not quite as much water, just goes to show you can't ever take anything for granted, or take anything too lightly. Lesson learned, and yes, very lucky! Thanks mate!
@Wayne-Kerr_Rudy-Zarzoff 14 күн бұрын
FFS
@MudModsBeers 14 күн бұрын
TY
@leemobai762 19 күн бұрын
I for one am sick of these paid reviews. Buy an Ecoflow if you want a good product with good customer service.
@MudModsBeers 19 күн бұрын
Thanks for watching
@limarosta5880 29 күн бұрын
what a beautiful blue colour! can i get the number?
@MudModsBeers 29 күн бұрын
Hey mate, thanks for watching, it really is a nice blue alright. It's a factory Toyota colour, not sure of the code sorry!
@JRCadventures Ай бұрын
Thanks so much for having my guys! 🙌
@MudModsBeers Ай бұрын
Thanks so much for letting us have a look around your build! Loving your channel too mate!
@1WinchesterSt Ай бұрын
Great video mate, just came across ur channel! New Subscriber! Love North Straddie!
@MudModsBeers Ай бұрын
That’s so good mate!!! Thanks so much!!!
@mattbehan218 Ай бұрын
Great to see Josh on the channel boys. He’s a genuinely great guy.
@MudModsBeers Ай бұрын
Thanks mate! He really is a great guy, and ridiculous that he love literally 10 mins away too!
@lovelawns Ай бұрын
Another great video mate. Are those 33s are 35s on the car in this video? Cheers 👍🏻
@MudModsBeers Ай бұрын
Thanks mate! They are 33’s on the car in this video
@lovelawns 29 күн бұрын
@ thanks mate 🤙🏻
@bouncingboxer Ай бұрын
Small pack up as it doesn’t have a proper foam mattress. I started out with a $30 air mattress which is freezing, uncomfortable and springs a leak after about 3 uses. No thanks San Hima.
@MudModsBeers Ай бұрын
Thanks for the comment mate, we’ll keep using ours as it hasn’t let us down yet.
@OTWD Ай бұрын
Well presented. Great work guys. Happy travels now 5 months on the road!! Only point of contention I have after watching is maybe I would prefer to have the windows clear without obstruction/molle panel/canvas pockets/ Just to keep some more 'lively light' in the interior. Thanks heaps for sharing. Cheers
@MudModsBeers Ай бұрын
Awesome!! Thanks so much for the feedback mate, really appreciate it. Brando is actually back at the minute, must ask him how he likes or dislikes the molle panels. I do know he's got a lot of odds and ends stored on them. Good luck with the travels, so jealous!!!
@ronanderson2527 Ай бұрын
Nice job. Did you notice the steering got a little heavier with the new arms in?
@MudModsBeers Ай бұрын
Hey Mate, Thanks! To be honest I really didn’t notice any difference in the steering as far as heaviness goes . Was fairly similar to factory.
@PatrickGallagher-l4p Ай бұрын
Thanks for the video im also stealing the idea, did you use the 2mm tube or the 1mm ?
@MudModsBeers Ай бұрын
thanks mate! I'm not sure what size the tube was, absolutely wasn't 1mm, might have been 2mm or maybe even 3mm for greater strength. I'd recommend getting the thickest you can, being alloy its not that heavy anyway.
@PatrickGallagher-l4p Ай бұрын
@ cheers mate,, great video by the way… im following you guys now for more ideas. Just picled up my 1650 MW Canopy last week and about to start the build👍
@MudModsBeers Ай бұрын
Awesome! Great choice mate, I'm very happy with mine :) Good luck with the build and thanks for following!
@JamesJeanneret Ай бұрын
Great gear from TBC. I’m in line for an LX27 for my camper trailer.
@MudModsBeers Ай бұрын
Keen to hear what you think of the LX27, and if you can fit all the bedding etc inside. If so, think it might make the DX nervous :) Thanks for watching!
@binqatami Ай бұрын
Whats the Front Runner Leg mount part number or size for the roof rack
@MudModsBeers Ай бұрын
Hi mate, apologies I’m not sure, Brando is currently travelling Aus in his Troopy so might be tricky to find out, I will try though. Thanhs for watching
@adelarsen9776 Ай бұрын
Correcting the track on a 70 series is a waste of time. Here's 2 reasons why : a) No commercial, govt or industry users complain about the track being different. I drive one every day and I'm on a cattle station in SW Qld. I have not noticed any problem. b) Going around a corner the back never tracks the same anyway. Or is this vehicle only being driven in a straight line ? I'd love to know your thoughts and also just who is it who is having problems with the wheel track being different from front to back.
@MudModsBeers Ай бұрын
Hey mate, Thanks for the comments, I can't speak for Brando as it's his truck, however from my experience the track correction is most noticeable in sand, without it I used to had the rear fall into ruts that the fronts didn't fall into, it was noticeably more skittish. Each to their own though, I can see in a lot of cases there is no need. There will be people do it purely for aesthetic reasons too.
@adelarsen9776 Ай бұрын
@@MudModsBeers Excellent answer. Thank you. I wish you good health and prosperity. 🙂
@bitminerbob6731 Ай бұрын
That kitchen side looks awesome. I would have the fridge opening the other way though, but awesome rig!!!
@MudModsBeers Ай бұрын
Thanks mate, he’s planned it out so well. It’s absolutely on my dream list for my car!
@M_sax23 Ай бұрын
His brand looks almost the same as explore life
@MudModsBeers Ай бұрын
Thanks for watching mate
@M_sax23 Ай бұрын
@ always producing great vids cheers guys !!!
@MudModsBeers Ай бұрын
thanks mate! really appreciate that!! Thanks for the comments :)
@TylerIrving-g6e Ай бұрын
hows it sound in the cab?
@MudModsBeers Ай бұрын
It’s ok, just, I’d say no DPF back exhaust will be loud. However it’s way better than stock in my opinion
@toolowgo Ай бұрын
Great video guys. Don’t forget to get some green shit on your plate 😂
@MudModsBeers Ай бұрын
Thanks mate! Not sure we will remember the green stuff! Takes up too much room in the fridge 😂😂😂🍺
@Onkelwillys Ай бұрын
Wo wird geschlafen ?
@MudModsBeers Ай бұрын
In a swag, he’s just about to fit a roof top tent, which will be much better
@ATL_Service Ай бұрын
Nice video!
@MudModsBeers Ай бұрын
Thanks 🙏
@4x4xplore41 Ай бұрын
Nice set up Richard! I really like your Enerdrive set up… maybe I will upgrade soon!
@MudModsBeers Ай бұрын
I’d really recommend it!! Complete game changer
@louiskudlak2241 Ай бұрын
Awesome set up, im sure though your next video we’ll see a 400 amp slimline in place 😂😂😂😂😂
@MudModsBeers Ай бұрын
Thanks mate! No need for a 400 Ah, yet……….😂😂😂
@MitchHenessey Ай бұрын
Great setup. Is the dropdown kitchen a new product? I can't see it on the MW website, only a 600 wide one.
@MudModsBeers Ай бұрын
Thanks mate! Yes think the kitchen is fairly new, I’d not seen it on their website either, was on display in the showroom. Sit different to everything else eh? Does get a few comments when we open it up. Good piece of kit though
@MitchHenessey Ай бұрын
@@MudModsBeers It's bloody brilliant.
@kiakadi_manosphere Ай бұрын
My favorite car
@MudModsBeers Ай бұрын
Mine too!!!
@4x4vanintow48 Ай бұрын
That was great. Good fun. Loved the pub crawl. We are big believers in travelling with our headlights on also. There are heaps of people that don't think it is necessary and love to argue the point of why... But we do and you do and I'm happy the others that do. Thanks for the Eps. Are you all going to MMB 25? We are 1st timers going and so looking forward to it.
@MudModsBeers Ай бұрын
Thanks for watching!!! Loved the MMB this year, not sure about next year, would love a trip to the Cape if possible!!! Have fun though, it’s an absolute blast and we will be back!
@TomFizz16 Ай бұрын
At the back of your sure power inside the canopy you should cut those screws off. Will end up cutting your power cable
@MudModsBeers Ай бұрын
You're right, I should have done that! Thanks for watching!
@4x4xplore41 Ай бұрын
Hi Richard Curious to know how the shelves will hold on corrugations. I am planning to use the same construction approach to build a slide out kitchen!
@MudModsBeers Ай бұрын
Just got back from a trip up to Kinkuna, had a few correlations along the way. I ended up fastening them to the roof and side of the canopy. They’re honestly going nowhere, strong as. Which is impressive as usually I’m useless at this stuff!!!
@louiskudlak2241 Ай бұрын
Comedy channel as well, thanks for the laughs😂
@MudModsBeers Ай бұрын
We do try 😂😂😂🍺🍺 thanks mate
@livingworkingoutsidebox 2 ай бұрын
Great looking rigs. Thanks for sharing 👍 😊
@MudModsBeers 2 ай бұрын
Appreciate the feedback Mate!! Thanks for watching
@BooleanError9 2 ай бұрын
Norn Iron?
@MudModsBeers 2 ай бұрын
yes!!!!
@jamiebradshaw-mo1qs 2 ай бұрын
I’m starting to get sick of all these paid ads
@MudModsBeers 2 ай бұрын
Thanks for watching
@jeep2701 2 ай бұрын
It’s the KZbin way unfortunately Jamie. I just don’t know how many can actually afford it some of the “provided” products given to KZbinrs to review.
@markhobson5628 2 ай бұрын
Then don’t watch them mate, I say good on these blokes for doing what they do because it’s a great source of information. I watch these so I can make my mind up on what set up best suits my needs.
@MudModsBeers 2 ай бұрын
Thanks Mark, really appreciate the comments! We do try hard top provide accurate reviews and info.