Organic farming starts with manure
25:00
Beautiful hay farming
10:19
21 күн бұрын
First hay cutting 2024
20:55
Ай бұрын
Many hats of a homesteader
11:49
True farm to fork meat
8:21
Ай бұрын
Storm damage spring clean up
16:39
100 year old barn wood salvage
11:54
Utility trailer rebuild finished
39:27
Пікірлер
@backachershomestead
@backachershomestead 3 сағат бұрын
If the subfloor is good in front of the door,you could always cut the finished flooring out in front of the door as far out as what is bad. Giving you a rectangle in front of the door. Then run new flooring long ways in that space. It just gives it something different as a pattern. New or old flooring is always hard to match in width and then you wouldn't have to worry about it. JMO. Have a great day!
@mommymilestones
@mommymilestones 3 сағат бұрын
Good idea, I thought of that also after seeing the door wall patch as it is not the same depth as a wall leaving. My old house also has slate in all the doorways and fireplace front as an alternative.
@jonplay3602
@jonplay3602 Күн бұрын
Can you just use a plug? Or do you have to use the adapter .. I have a 12v fan wanna plug it into the wall
@UndergroundLookingUp
@UndergroundLookingUp 3 күн бұрын
Hows the trailer hitch been holding up since? Tow anything heavy? Im thinking of throwing one on my Buick
@mommymilestones
@mommymilestones 3 күн бұрын
Lots of heavy loads. Working perfect.
@user-ld7qp9rg1p
@user-ld7qp9rg1p 6 күн бұрын
Very nice video
@mommymilestones
@mommymilestones 19 сағат бұрын
Thanks
@powerram92
@powerram92 6 күн бұрын
Does the hay have any moisture or mold when you unwrap the hay? Looking to get some wrapped to use for later as square bales.
@mommymilestones
@mommymilestones 3 күн бұрын
Any remaining moisture in the hay even when wrapped very dry condenses to the plastic. The outside 1/8 inch is always damp and the rest is always perfect.
@powerram92
@powerram92 2 күн бұрын
Thanks for getting back. We are looking how to store round bales since we don't have storage. We rebale our rounds into square bales in the winter so the least waste the better for us.
@osi2484
@osi2484 8 күн бұрын
Can never trust a jack or hydraulics .......high Risk
@14hometeam
@14hometeam 10 күн бұрын
Your video has given me a lot of hope. Our washer overfilled this evening. Tomorrow morning after my husband goes to work I’m gonna crack it open and check out that that valve.
@dianegiittingerrainbolt7876
@dianegiittingerrainbolt7876 10 күн бұрын
Can you share the recipe in the comments?
@PermianPanther
@PermianPanther 12 күн бұрын
Wonderful video thank you
@backachershomestead
@backachershomestead 14 күн бұрын
That's a load of 💩🤔😂😂😂
@mommymilestones
@mommymilestones 3 күн бұрын
6 or 7 actually.
@kassandrapage4379
@kassandrapage4379 14 күн бұрын
@mommymilestones. Thank you for the video. I just bought a house that has heating oil furnace with a hotblast wood furnace same as yours. The question Im asking is that, are you only using the wood furnace? What will happen to the other furnace? Can i just use the wood furnace alone? I was told that I have to use both. Im so confused. Do i need to keep buying oil to fill the heating oil? Thanks in advance for the answer.
@mommymilestones
@mommymilestones 14 күн бұрын
We have not used our old furnace 1 time. Its basically there to run the a/c in the summer.
@StIsidoreHomestead
@StIsidoreHomestead 17 күн бұрын
We just got our first jersey milk cow a week ago with a male calf born about 3 months ago. We don't know if its the stress of travel or my beginner hand milking, but I am only getting about a half gallon in 30-45 min. Do you have any suggestions? We feed her some oats while milking and she has access to pasture and forage all day. We are separating the calf at night...
@mommymilestones
@mommymilestones 12 күн бұрын
Some cows do not produce a lot in extreme heat. Make sure she has good hay with alfalfa, mineral block, clean water. We do not feed grain or keep the calf on mom if we are milking her.
@arcticablue
@arcticablue 18 күн бұрын
Thanks for the video! I love it when women make no-nonsense videos!
@mommymilestones
@mommymilestones 18 күн бұрын
Thanks!
@Nemo-yn1sp
@Nemo-yn1sp 19 күн бұрын
Thanks! Needed a quick refresher.
@mommymilestones
@mommymilestones 18 күн бұрын
No problem
@Packables
@Packables 19 күн бұрын
Raising rents ensures a better tenant?
@mommymilestones
@mommymilestones 18 күн бұрын
Not always.
@Hallelujah77465
@Hallelujah77465 20 күн бұрын
Jesus Christ loves you and died on the cross for your sins please give your life to God before its to late.
@mommymilestones
@mommymilestones 20 күн бұрын
Amen
@mommymilestones
@mommymilestones 20 күн бұрын
Amen
@jefffirefighter12106
@jefffirefighter12106 22 күн бұрын
Great looking Hay!! We just started 1st cutting, square bales, about 10 acres. West side of the State.
@mommymilestones
@mommymilestones 22 күн бұрын
The weather has been difficult hasn't it?? Ifound the only easy thing about square bales was feeding them to the barn animals. We were storing thousands of bales all year to sell 5-50 at a time. We switched to round bales and we are selling out as we go.
@jefffirefighter12106
@jefffirefighter12106 21 күн бұрын
@@mommymilestones We try to use both small square and small round to finish out our Beef Cattle for freezer sales. We farm around 150 acres in Cass County Mi. mostly small fields that the (Large Farmers) can't get their equipment into. We use all two-cylinder tractors and equipment.
@cassilynn1350
@cassilynn1350 23 күн бұрын
Thank you so much! After watching this I was able to change my belts! ❤❤❤❤
@mommymilestones
@mommymilestones 22 күн бұрын
Glad it helped!
@mommymilestones
@mommymilestones 22 күн бұрын
Glad it helped!
@mommymilestones
@mommymilestones 22 күн бұрын
Glad it helped!
@mommymilestones
@mommymilestones 22 күн бұрын
Glad it helped!
@cgtull
@cgtull 25 күн бұрын
I just picked up a 1880s Handy similar but has a t handle instead.
@user-ts6ik8kd1w
@user-ts6ik8kd1w 26 күн бұрын
I was changing out the lid switch on my Kenmore washer. When I reassembled it then it started to overfill, so I took it apart looking for that disconnected hose and realized that the hose was being pinched when I reassembled it there's a cavity in the top to allow the wires to go through make sure that hose routes through that cavity.
@mommymilestones
@mommymilestones 22 күн бұрын
Exactly
@jonbarker9888
@jonbarker9888 26 күн бұрын
Good video. 3 hours to save $30.00 is a bit much for purchasing and hauling used stuff. Just rent a U-haul.
@mommymilestones
@mommymilestones 22 күн бұрын
Closest uhaul is 45 minutes away and they charge mileage. Car seat removal takes 10 minutes.
@jonbarker9888
@jonbarker9888 11 күн бұрын
45 minutes? Bummer. None the less this is a well done informative video.TY very much. BTW, GM started experimenting with moving batteries under the rear seat. They run cooler and last longer and are much safer under the seat and away from the engine.
@GonzaloOcampo-cu2ho
@GonzaloOcampo-cu2ho 26 күн бұрын
Mine is same 🎉🎉
@TF856
@TF856 27 күн бұрын
Which brand is it? Arlington or Eclipse?
@mommymilestones
@mommymilestones 3 күн бұрын
Arlington is the brand and eclipse is the model.
@fochdischitt3561
@fochdischitt3561 28 күн бұрын
I wish they had made station wagons out of the H platform.
@baddriversofillinois1209
@baddriversofillinois1209 29 күн бұрын
saved me from spending on a plumber this video is a life saver.
@millinglumberforwoodworkin6966
@millinglumberforwoodworkin6966 29 күн бұрын
I have the same grinder. ,,,,,,,,,,,,,,,"Ӏ սѕеḋ tо tḣіոk ḣοⅿеѕtеаḋіոģ ԝаѕ ḣаrḋ...ḃսt tḣіѕ сḣаոģеḋ еⅴеrуtḣіոģ." Ԝ*І*Ŕ*Ê*Š*Ǒ*Ս*Ť*Η*.*Č*Ο*Μ ;;;;;;;;;;;;;;;;
@BurntRiverRanching
@BurntRiverRanching 29 күн бұрын
My pulsation rate is way too fast on my C pulsator and I’ve played around with the set screw lots. Any idea why?
@benkanobe7500
@benkanobe7500 Ай бұрын
Isn't the '53 Jubilee and the '54 NAA absolutely identical except for the front emblem?
@richardstell8099
@richardstell8099 Ай бұрын
Thank you ma’am ! 😀
@dontaejarell
@dontaejarell Ай бұрын
And that's unsafe dumb ways to die
@mommymilestones
@mommymilestones Ай бұрын
Ok Karen I hope you find something to do with your time.
@kandydaugherty
@kandydaugherty Ай бұрын
Thanks so much
@curtmichaels9944
@curtmichaels9944 Ай бұрын
When emptying my parents home I found two of these chairs. Haven’t use the cumbersome bag chairs since. Love these! Thank you for the tutorial, I’ll be doing this soon. I did read where these chairs have a 225lb weight limit.
@farmingforfunandprofit940
@farmingforfunandprofit940 Ай бұрын
It Rained Monday night, so all day Changing the Oil in all three Disc mover Monday, We cut 100 avcres Tuesday and 80 acres Wed And when we finished, my Son Tedded untill midnight the !00 acres we mowed Monday (6 basket Tedder) ..... We round baled i 100 acres Friday.( 367 4x5) Hope to Bale the 80 Saturday.... Then The Hauling, & stacking under Cover begins
@justiceliberty4364
@justiceliberty4364 Ай бұрын
I need to know how to lift up the front!
@deedoll6313
@deedoll6313 Ай бұрын
I appreciate it cuz I got a whole bunch of mint at my house and I don't know what the hell to do with it so I was just trying to figure it out but that helps me a little bit so at least I got something to do with it I can do like four or five gallon buckets worth of meant that's that's a lot so that's why I'm trying to see all right ma thank you
@Geecomp3
@Geecomp3 Ай бұрын
Thank you for the video Inspirational I have a 2-71 gen set also. Trying to get mine set up. Would it be possible to come by and get some electrical advice. Gerry in Pontiac Michigan
@Ari.plays.
@Ari.plays. Ай бұрын
I have a tcl Roku tv and pretty much the same thing is happening any help??
@stevenphilip719
@stevenphilip719 Ай бұрын
you are showing the finished part. but not showing the labor it takes
@mommymilestones
@mommymilestones Ай бұрын
My other floor stripping video showed more how to than this one on a 70 year old home if that's what you're looking for.
@charlasmith7590
@charlasmith7590 Ай бұрын
I wanted to make your zucchini bread but I could not find the recipe. Only the link for your flour container. I don’t think you say how much zucchini you put in or the measurements of baking soda etc. in your video.
@BaskahKaise
@BaskahKaise Ай бұрын
You had the first video on this topic that actually worked thank you
@mommymilestones
@mommymilestones Ай бұрын
Great glad to help others always!
@laurel7562
@laurel7562 Ай бұрын
You have box miters on your gutter corners like I do. They are known for leaking and it can really mess up the fascia.
@mommymilestones
@mommymilestones Ай бұрын
Yes, I had to seal up all the seams.
@robertMartin-io8bw
@robertMartin-io8bw Ай бұрын
Do you have a pulastor to sell
@mommymilestones
@mommymilestones Ай бұрын
Yes
@jordanedwards3066
@jordanedwards3066 Ай бұрын
Smart young man !
@mommymilestones
@mommymilestones Ай бұрын
Thanks
@fastsetinthewest
@fastsetinthewest Ай бұрын
I order some old parts from Steiner Tractor Parts, Inc., Lennon, Michigan. Matter of fact, my grandfather owned an Allis Chalmers dealership in the 1930s and 1940s in Lennon. We ran all John Deere, but in 1965 we bought a front drive assist 1950 Oliver Detroit Diesel and pulled a 8/16 plow. Nice video.
@mommymilestones
@mommymilestones Ай бұрын
That Detroit diesel is probably sitting in someone's collection today!
@fastsetinthewest
@fastsetinthewest Ай бұрын
I found your channel the other day watching how to fix a Kenmore. I was raised on a 1400 acre farm in Venice Township of Shiawassee County. I watched my first eclipse watching through welding glasses in the early 1960s. I got drafted off the farm in 1967. My next door neighbor, Alexander Zsigo was killed the month I went into the Army. My best buddy in high school, Dwight I Ade was killed in Vietnam. My best buddy in the Army, Jesse Carmona, Jr. Was killed too. I saw 4 men die at the same time in 1968 and didn't know their names. Men were wounded next to me in combat. I spent. a fortnight in a Vietnam field hospital during the Tigers 1968 appearance in the World Series. I got to see parts of a tape delayed game. Over 16,000 of us were killed in 1968. Look up those names I mentioned. Don't ever allow your children to go into the Armed Services. My son-in-law is a Major in the Army and spends most of his time in transsexual training.
@mommymilestones
@mommymilestones Ай бұрын
My husbands family has been very heavilly involved in every war this country has been in up until Vietnam. The last was one of his uncles who was a drill sargent south of here. We have not been involved since. And won't be. The losses over the last 250 years is enough.
@campbellsmith5484
@campbellsmith5484 Ай бұрын
Nice work
@mommymilestones
@mommymilestones Ай бұрын
Thanks
@md-shihab-uddin.
@md-shihab-uddin. Ай бұрын
Hi, hope this message finds you wel. I wanted to share some tips to improve your KZbin channel and maximize the visiblity of your content. Tips that your competition is using to get better results than you and grow their KZbin channel.
@mommymilestones
@mommymilestones Ай бұрын
Thanks for sharing!!
@evanwarrenchuk4003
@evanwarrenchuk4003 Ай бұрын
The other video he hooked to the valve in front bye radiator fan. I don't know witch one
@mommymilestones
@mommymilestones Ай бұрын
I don't know who he is, but mine for this car is as shown. I've had 2 bucks and they are about the same 5 years apart and different models as well as engine.
@thedocisin3204
@thedocisin3204 Ай бұрын
13 years old and has earned his "man card".
@mommymilestones
@mommymilestones Ай бұрын
He was waving that card the day he was born. Nothing like most boys his age ever.
@PatrickCPalmer
@PatrickCPalmer Ай бұрын
How many peddles/buttons are on the floor?
@mommymilestones
@mommymilestones Ай бұрын
All of them.