@@patrickbadder4516 thanks for watching, glad it could help
@liamlacey64626 күн бұрын
Will this cause blow by/ excessive crank case preassure in the motor?
@colemanmech26 күн бұрын
Hard to say. How many miles / hours on the motor? High idle time under little load will definitely cause blow by. With this problem, I would see the fuel not being completely burned and getting pushed past the rings, could lead to increased ring wear. Essentially, washing the cylinder
@user-tb9rw7dh2tАй бұрын
Smash? WTH??? Somebody rescue that car!
@colemanmechАй бұрын
Watch my other videos. I bought a good bit of stuff for it. Bought another car as well
@user-tb9rw7dh2tАй бұрын
@@colemanmech 👍
@KALMER2Ай бұрын
Fix it
@Wondering_Wobble2 ай бұрын
for a while My truck was throwing Cyl 4 inj quantity and then every know and then it would do the pop through the intake and go away. Well finally went to dead miss, Pulled pass valve cover and found all 4 cyc had 1 intake popped off couple missing lash adjusters some rotated lifters and 4 had both intakes popped off. Now trying to figure out what to do. I dont have the money to shell out for a reman or new, Maybe a used engine that I can replace the rocker assemblys. But this absolutely sucks.
@colemanmech2 ай бұрын
That is terrible to hear. Honestly though, for what these motors go for used, I'd just swap motors, you'd be doing twice the work, in my opinion, swapping parts. If you're capable of doing the work though, source a cam and valvetrain and do the work yourself. Speaking of 6.7s, I've got one here now that's got a wrist pin or piston knock at 180k miles
@datboikevy43892 ай бұрын
What transmission
@colemanmech2 ай бұрын
It's a th400. We are swapping a 4l80 in it
@datboikevy43892 ай бұрын
@@colemanmech what motor mounts
@colemanmech2 ай бұрын
@@datboikevy4389 I used GM small block frame motor mounts with the dirty dingo slider mounts. I have some pictures of it on my IG page, colemanmechanical
@datboikevy43892 ай бұрын
@@colemanmech yes sir on it
@colemanmech2 ай бұрын
@datboikevy4389 I need to get up with Jalen and do a year review. He's been driving that thing a good bit, 3hr round trip everyday for work
@fnafplayer64473 ай бұрын
You can send it harder than that dude
@colemanmech3 ай бұрын
Yeah probably so, haha
@user-fl3ey6pe6k3 ай бұрын
I'm guessing you're in the south, and if that the case, id keep looking. the one you have looks like what me and my friend drove back in the early 80s around Detroit, and that meant salt, plus that motor sounds fubr
@colemanmech3 ай бұрын
You're correct, I am located in the South. That motor was garbage, I've since swapped another motor into it.
@dariuswalker60594 ай бұрын
🔥🔥🔥🔥
@colemanmech4 ай бұрын
Appreciate it, Lock in to see the progress
@Hunterbtw6394 ай бұрын
Great job man
@colemanmech4 ай бұрын
Thank you partner
@gerryr84004 ай бұрын
Thank you for info cause i got a 2017 6.7 with popping noise in intake that im fixing to tear right side valve cover off and see what went wrong
@colemanmech4 ай бұрын
Pull your codes first and see if you have any cylinder contribution codes. That'll help you determine which side you should tear into
@gerryr84004 ай бұрын
@@colemanmech i got macco maximus 3.0 and 3 and 8 is in the negative when I did power balance and noise don't sound good either
@colemanmech4 ай бұрын
@@gerryr8400 yeah, definitely won't matter which cover you pull then having cylinder issues on both banks
@ChronicallyIllSoldier4 ай бұрын
🎉Way to go!! Love it.
@szra054 ай бұрын
THAT CURVE 🔥
@colemanmech4 ай бұрын
A game before that I was 15 boards right with my feet. The guys on the pair broke it down QUICK!
@sounboy44984 ай бұрын
Supporting the channel 💯
@colemanmech4 ай бұрын
Preciate it 💪🏽, check my other videos out!
@sounboy44984 ай бұрын
@colemanmech I did brother I'm a diesel technician as well mostly diesel powered vehicles/equipment, black an proud 🛠
@colemanmech4 ай бұрын
Yessir, keep on with it. We gotta do the job, then an extra 100 percent
@lssleepers64644 ай бұрын
What size cam and what efi connection u running
@colemanmech4 ай бұрын
I can't remember the exact size, I had swapped cams. I think what's in it is .561/.571 241 duration
@colemanmech4 ай бұрын
The EFI Connection kit I have is the 0411 24x for the lt1s
@lssleepers64644 ай бұрын
@@colemanmech how was it putting it on...did u have hp tuner with it
@colemanmech4 ай бұрын
It was easy! Pretty simple process. You'll need a 95-97 timing cover, or buy their cover. They provide a reluctor wheel for the crank and cam. Wire it, it's plug and play. Set mine up with HP Tuners. But after I bought mine, they made a harness to use with Holley
@lssleepers64644 ай бұрын
@@colemanmech yeah I got a 94 impala ss and I'm working around a few performance mods and I was looking for opti delete method ..cause I dont really care about the whole ls swap thing cause u can hp out of a lt1 ..right now minds is doing almost 430hp on the dyno cause I haven't done much work to my transmission and I just did a stall and but I didn't do a rebuild on it
@donhanns48704 ай бұрын
Find that door and you got yourself a bad ass ride!
@colemanmech4 ай бұрын
I took it off the replace the pins and bushings. Check out my videos on the car
@thesurplusfirearm23745 ай бұрын
Thanks for the video
@colemanmech5 ай бұрын
No problem! Thanks for watching
@eatingelizabethsfrizbee5 ай бұрын
Looks like she was right 😅
@colemanmech5 ай бұрын
She was haha
@user-zu4iw2ce6m5 ай бұрын
Sounds SLOW 😂
@colemanmech5 ай бұрын
Eh, maybe maybe not. Speed of light is quiet...
@isaiahjones18025 ай бұрын
She dont know just yet its the process then she gone be begging to drive it 💯
@colemanmech5 ай бұрын
Yessa! Patience, gotta have patience
@user-iu2oh4hn7g5 ай бұрын
Sweet Show off more junk
@colemanmech5 ай бұрын
I've got plenty of it haha
@ericeaklor67025 ай бұрын
It would definitely be way more fun cooler if it was a CJ5 or a Willy's
@colemanmech5 ай бұрын
Yes it would have. When I was younger I had a 74 cj5 304 3 speed, didn't realize what I had and sold it dirt cheap
@ericeaklor67025 ай бұрын
@@colemanmech yep that's about right
@barrybray44465 ай бұрын
My 72 FLH is behind me at patio door wanting to go for a ride. An my 86 GMC sq body pretty nice county's trying to make me get rid of hope I can keep. I just love old stuff simple times as kid peace
@colemanmech5 ай бұрын
Gotta love how the local government tries to tell you what to do with your own property
@johnwhalen31915 ай бұрын
She's right
@colemanmech5 ай бұрын
Preciate it, be a little better once I put the msd on it and dial in the timing
@johnwhalen31915 ай бұрын
@@colemanmech 👍
@DanEBoyd5 ай бұрын
I like that blue in the door jambs, but that thing would look impressive in black, with all of the window frame chrome, and the chrome fender 'louvers.' The red ain't bad, (it looks like a Nova color) but I'd go for the blue or black if repainting.
@colemanmech5 ай бұрын
I'm a big fan of darker hues. Black, Brandywine, gunmetal grey. If I keep it for a long time it'll likely get one of those. Yes it'll look good with the chrome and all. Was thinking maybe getting chrome rallys like on my Chevelle
@DanEBoyd5 ай бұрын
@@colemanmech I'd stay argent on the wheels. And I'd keep the fender louvers all chrome, (even though they're supposed to be painted, except for the edges) at least for a little while - I might go factory correct on them later...
@colemanmech5 ай бұрын
Those chrome louvers are nice. The argent silver does have a nice look to it, kinda like wearing khakis and a collared shirt instead of a suit
@waynehuffert79835 ай бұрын
Already got doors , blown off??😮😮😮😮
@colemanmech5 ай бұрын
Need better woodscrews
@hueyfreemaniii62145 ай бұрын
Nice car but where’s the junk she talking about
@colemanmech5 ай бұрын
Women, can't live with em, can't live without em
@kevinroberts93945 ай бұрын
6.7 has several issues. If you ever have the rocker boxes out inspect them well the spray bars get plugged the lack of oil makes the rocker pivot balls wear out then they bind then the lifter turns wearing out the cam working on 1 at the moment 125000miles. With regular oil changes and always check spray bars to be sure they are not plugged
@colemanmech5 ай бұрын
I'll keep that in mind on the next one. Thanks for commenting
@zacarmstrong57515 ай бұрын
Yep and ford knows about it. They change their rocker arms a few times. No recall though even though the defective parts are on many years not just earliy models by the time theu caught it. It will fail a matter of when not if with that part unfortunately its usually after warranty. Im at 120k and on my second engine now thanks to Ford. Very easy to prove every one will fail eventually from this. Rocker get wiggle room walks off center of valve stem push rod comes out allows lifter to break engine grenades. Absolute Horse shit. @ford
@colemanmech5 ай бұрын
It wouldn't surprise me if there happens to be a class action law suit, just like with the cp4 fuel pumps
@ikewilson45005 ай бұрын
Just got me.. Ford wants 17k to fix
@colemanmech5 ай бұрын
@@ikewilson4500 goodness, that'll hurt the wallet
@zacarmstrong57515 ай бұрын
@ikewilson4500 document everything incase there's a class action lawsuit can get reimbursed.
@VintageLivin335 ай бұрын
hell yeah
@internetxuserx97805 ай бұрын
What exhaust are u running?
@colemanmech5 ай бұрын
We built a 3" y pipe, into a Vibrant race muffler, it's dumped in front of the axle
@internetxuserx97805 ай бұрын
@@colemanmech tyvm bud
@1marcelfilms5 ай бұрын
Just patch it up and go
@colemanmech5 ай бұрын
Take a look at my nova videos I recently uploaded, given the condition of that car and how the patch work was done, the Chevelle I'm going to have the patch work done perfectly
@ppc7615 ай бұрын
Got that kadoodle stick in there huh lol
@colemanmech5 ай бұрын
Just a little one!
@MrCaliboy705 ай бұрын
Sounds like my 90 blazer with my 383 be4 I put glass packs on it
@howardframe82825 ай бұрын
Nothing like yhe sound of a SBC
@colemanmech5 ай бұрын
Yessir, thank you!
@VintageLivin335 ай бұрын
Lookin good!
@colemanmech5 ай бұрын
Thank you!
@ChronicallyIllSoldier5 ай бұрын
Love it!
@MikeWolf-4275 ай бұрын
Sounds Great
@colemanmech5 ай бұрын
Thanks!
@MikeWolf-4276 ай бұрын
Great to see a new video. Keep up the hard work. I'm just starting to tear into my '69 Nova. It feels like every other car on the planet needed to take up space in my garage before the Nova could get in. :) I seen on your profile it says you're from Virginia, I'm in Mechanicsville.
@colemanmech6 ай бұрын
Yessir I am. Located a hour south east of Danville . Right on the state line
@ChronicallyIllSoldier5 ай бұрын
Thanks for sharing!
@arcadian7litre6 ай бұрын
I remember the old Kenworths, Petes and Macks running the "Iron Lung" or Cummins NHRS series engines when I was a kid. In my 20s, I drove a 1956 Kenworth powered by a NHRS-320 and 5x4 transmission setup. I loved driving that old beast!
@jaysgarage86486 ай бұрын
The Cam's probably bad
@colemanmech6 ай бұрын
It definitely is bad. Pulled the motor the other day, tore it down. Worn cam lobe along with a main bearing that's walked out into the crank gear
@jamiel35047 ай бұрын
Even as it sits, it’s a such a sharp car and has a ton of potential, I’d definitely do a newer LS SWAP, excellent video 👍
@tonywest81406 ай бұрын
Agree. Cool Nova
@raylamp45057 ай бұрын
Any solid nova two or four door here in northern ohio is worth more than you think. We just need a good body the rest is easy.
@moosestangls50997 ай бұрын
Enjoyed the way an talked in the video my man you got my sub
@colemanmech7 ай бұрын
Thank you brother!
@kennymay90367 ай бұрын
good starting point.
@colemanmech7 ай бұрын
Yessir, thank you for watching
@PatrickSherman-dg6co7 ай бұрын
Always loved those cars for some reason
@colemanmech7 ай бұрын
They have definitely had a place in my heart, my old man had a 68 and 69 when I was my son's age
@BluMaGiKCj7 ай бұрын
Great trade! You can spray that, put a mini spool in it. Change that ugly grill.
@colemanmech7 ай бұрын
Yessir, it certainly needs a spool and a little bit of nitrous
@scotdeane50247 ай бұрын
Please dont TUB it!
@colemanmech7 ай бұрын
Don't worry, I like the stock wheel tubs!
@southernman76927 ай бұрын
u wanna sale tha gal
@colemanmech7 ай бұрын
Not just yet partner, pulling the motor to go through it. I'll post the video of what I found
@southernman76927 ай бұрын
iv got a 409 big block with tha 3 to barrel crabs and a 2 spedd power glide that go very nicely in it@@colemanmech
@colemanmech7 ай бұрын
That 409 with a six pack would have been nice in the 63' c10 I looked at before buying the nova
@southernman76927 ай бұрын
iv got a 66 c10 that am gonna put it in@@colemanmech
@colemanmech7 ай бұрын
That thing should be pretty nice!
@young119847 ай бұрын
Tell Josh i have an Explorer rear end down here, i was going to ask did Turbo John wire that thing😂😂. He dont need any 4 link mess, mono leafs and and some Cal tracks or whatever Billy runs on his since that traps been in the 4s with simple stuff
@colemanmech7 ай бұрын
Hahahahahaha Damn sure looks like some TJ work
@kylewatson67397 ай бұрын
Does he wanna sell that s10 IL give em my 03 yamaha r6 and cash
@kylewatson67397 ай бұрын
I'd even buy it with no motor if he's wanting the engine out of it iv been trying to find an s10 that's not rotted out but it's hard to find here
@colemanmech7 ай бұрын
@@kylewatson6739 shoot me an email partner, he says he's interested in talking to you. [email protected]
@colemanmech7 ай бұрын
@@kylewatson6739 he said that would work something out with you