Жыл бұрын
Жыл бұрын
Жыл бұрын
2 жыл бұрын
Пікірлер
@surfside75 14 күн бұрын
Such a nice build❤
@evanjones4728 Ай бұрын
Do you still make these plates? Been looking and cant seem to find them
@phillybrc 3 ай бұрын
She s a beast. I too, have been breaking stock slipper hubs.
@rcmadlabz2492 3 ай бұрын
This little tip is only effective at preventing bending the motor mount plate…when landing on all four tires. 😂 *A means of securing the entire end bell of the motor to the chassis solves all issues.
@RAY-1984-rc 4 ай бұрын
Hi there do you still make these for the 4s outcast thanks
@rcmadlabz2492 4 ай бұрын
You’ll find them on eBay when I have more. I’m currently on vacation. 😎
@albericmiftah 7 ай бұрын
Hi, I just got this car recently. Any recent update about this car? Anything broke? Any new mods I should install. Thanks
@rcmadlabz2492 7 ай бұрын
Other than what I share in the videos uploaded…the main struggle you’re going to have is the rear wheelie bar and bulkhead. *You will need to fabricate your own solution for something that has more flexibility.
@albericmiftah 7 ай бұрын
@@rcmadlabz2492 Thank you. I plan to buy spare tires, do you know any brands that have size similiar to factory tires? I searched everywhere, so far I only found 1 tires that similar in factory tire size, hobao mt tires. I don’t mind changing the hubs / hexes if the tire size are what I’m looking for
@Mr.Titanium1911 9 ай бұрын
Very informative. Thanks
@stevestanton8281 10 ай бұрын
I've watched yours and many other posts on the DBX 07 and was looking forward to fixing it's issues, however it's turned into frustration! I've tried to simply change out the wheel bearings but can't remove the 2.5 grub screws that hold the hubs in place! I even just tried putting a soldering iron in there and they still won't budge as I think their held in with red Loctite! So how is everyone else dealing with this issue? I'm at the end of trying and have stripped 2 of them now and thinking I'm best to just take it to a hobby store and get them to sort it! I look forward to hearing your advice as in all the videos I've watched, nobody has mentioned getting these grub screw out was an issue... Thanks in advance.
@rcmadlabz2492 10 ай бұрын
Butane micro torch..yes there is an abundance of red thread lock everywhere. Those grub screws need to be heated a lot to break down the thread lock. You’ll know when they are heated enough, as the thread lock will smoke a little bit and the grub screw will very easily un thread. The motor mount screws, center driveshaft support and center diff mount screws, all need to be hit with the high heat from a butane micro torch to be removed easily.
@stevestanton8281 10 ай бұрын
@@rcmadlabz2492 thanks heaps mate, much appreciated but what a pain! 🙄 I'll try again. Thanks for the quick response. 👌
@rcmadlabz2492 10 ай бұрын
@@stevestanton8281 yes, it’s a pain. Pretty sure they used a paint brush soaked in red thread locker for most of the screws. *Fair warning…you’re going to want to get creative when installing the bearings into the wheel hubs. (The hubs are oversized/bigger than the bearings…which leaves a lot of play)
@stevestanton8281 10 ай бұрын
@@rcmadlabz2492 yeah I'm hearing you but it's hard to deal with when you're only new at RC... I'm already in for over a grand Australian with the conversion rate... Seriously if I knew all this before I wouldn't have bought this model. What's your thoughts on a "easy" to work on 1/7 scale desert racer? Arrma Mojava??? As this DBX 07 sadly HAS ZAPPED MY ENTHUSIASM for rc... 😔
@rcmadlabz2492 10 ай бұрын
@@stevestanton8281 Oh My Gosh!! For sure, yeah..you picked a model that has many complex issues, that was a bit challenging even for Myself to sort out! *The Arrma Mojave is much easier. Nothing at all compared to the DBX-07.
@omega_rc 11 ай бұрын
Hey, Brotha hope you/re doing well. Been meaning to msg you for the longest and just have had a whirlwind of events, sorry for getting to you so late but I wanted to Thank You for the great products on my O4S a few months back, they worked really well but unfortunately too many slipper problems caused me to sell the rig, also my Wife & I are truly thankful for all that you have done for us and I'm still using your Xmaxx body retainer system. Again, thank you for all you've done for us and I wish nothing but the best for you and your fam! hope you see this msg have a good one!!!
@cherandissanayake9530 11 ай бұрын
Can you add the Sway Bar to the Arrma Vorteks 3s ? And please can you do a video how to install it and can you put the links to buy the parts
@SkunkCity_RC Жыл бұрын
Where are those custom driveshafts? Ebay doesnt list them?
@rcmadlabz2492 Жыл бұрын
There are many items that I have developed/redesigned and being added to our eBay store in the coming days. (Been a very busy last 2 months) 😎👍
@SkunkCity_RC Жыл бұрын
@@rcmadlabz2492 hope to see typhon 3s metal shafts. Seen how you took two sets 3/4s shafts and made your own. Ill keep my eyes open for yours to come out.
@rcmadlabz2492 Жыл бұрын
@@SkunkCity_RC Hey, no problem!! *As we grow, we make changes. The new shafts for the Typhon and BigRock v3…will come to the customer, further upgraded..and with shims to set up properly. (No need to purchase anything, just our driveshafts). 😎
@davidwatkins1126 Жыл бұрын
Just watched this and curious about the traxxas pivot balls. Why is it you need 2 kits. From what i can see they come as a kit of 12. Also would they fit the kraton 4s?
@rcmadlabz2492 Жыл бұрын
Traxxas pivot balls? Stand corrected. These are plastic “Arrma pivot balls shown”…and we offer the Aluminum upgrade which handles the other issue to be concerned with. (The width within its mounting point on the chassis) **if you are wanting to “Kill two birds with one stone”…I recommend purchasing our “Oversized Pivot Ball Set, AND our Shim Kit”. (This will allow you to eliminate all play and slop…make the model handle exactly the way you set it up, and be stronger)
@davidwatkins1126 Жыл бұрын
@rcmadlabz2492 at the end you mentioned using the traxxas tra5525 turnbuckles/pivot balls. You stated 2 kits would be needed. Was just curious as to why 2 kits would be needed?
@rcmadlabz2492 Жыл бұрын
@@davidwatkins1126 dis-regard those tips. (It’s been a while since this video was originally uploaded)
@davidwatkins1126 Жыл бұрын
@@rcmadlabz2492 is there a reason why not to use them?
@rcmadlabz2492 Жыл бұрын
@@davidwatkins1126 yes *in the end, you’ll find the best longevity and results using the oversized balls, and the shim kit. The Traxxas option is only more flexible, and the lifespan neglible.**We have shared/sold a BUNCH of our kits…rest assured, try and see for yourself.
@PlancksTime Жыл бұрын
What is the best diff oil to use for front and rear diffs in the dbx07?
@rcmadlabz2492 Жыл бұрын
I’m running the Arrma 1250kv motor, 6s. 16 tooth pinion. I have found that for my set up, 150k front diff oil, 50k rear diff oil, and 50/50 blend in the center diff of 1 million and 500k oil works perfect for how I use/run my custom DBX-07. *The biggest improvement was converting to the Arrma suspension/driveshafts….it completely eliminated the mistakes ZD Racing has with the model.
@gicungduoc3860 Жыл бұрын
can the motor mount fit a 4985 motor?
@rcmadlabz2492 Жыл бұрын
Yes, that can fit. There is room for up to 95mm long motors.
@gicungduoc3860 Жыл бұрын
@@rcmadlabz2492 tks
@shanehansen2141 Жыл бұрын
Those arms at the end are crazy. I'm new to the RC hobby and I've read that the RPM arms are softer to avoid breakage. I've never seen them droop like that. I want to long arm my Granite so I guess I'll stick with the cheaper stock Typhon arms. 😂
@rcmadlabz2492 Жыл бұрын
Yeah, not always “the best option”. (I mean, for winter bashing…sure, 100%) *I have an option I’m going to be listing on our eBay that’s right up your alley for your Granite conversion….
@shanehansen2141 Жыл бұрын
@@rcmadlabz2492 don't do that to me. I've already got a few things from your store in my cart. 😂
@rcmadlabz2492 Жыл бұрын
@@shanehansen2141 lol…sorry. Been putting some parts thru their paces, specifically an aluminum upgrade package for short arm models.
@rcmadlabz2492 Жыл бұрын
@@shanehansen2141 Your color scheme on your Granite wouldn’t happen to be Blue? Lol, heck…I will powder coat them a custom color for you at no extra charge.
@cwatson42785 Жыл бұрын
Hey great video, do you have a website?
@rcmadlabz2492 Жыл бұрын
Sorry, no website. We have our ebay store. “RcMadLabz” www.ebay.com/itm/165285737739?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=EdwFYbYESU6&sssrc=2349624&ssuid=EdwFYbYESU6&var=&widget_ver=artemis&media=COPY
@dballz78 Жыл бұрын
So many questions to ask.
@rcmadlabz2492 Жыл бұрын
So many answers I will give! 😂
@ubreakitirepairit3569 Жыл бұрын
Funny video.
@semadragun Жыл бұрын
Was almost going to buy one of these until i saw this video thank you.
@rcmadlabz2492 Жыл бұрын
Glad to have helped.
@Airbrushkid Жыл бұрын
I listen to you say that is so durable. But you offer a Armor version that is just a nylon sleeve over over the rubber cord. Why if it is so durable?
@rcmadlabz2492 Жыл бұрын
It is “impossible” to account for every circumstance that a person will put their model through. The Armored version gives people a chance to learn what the Cords can and cannot handle. If you loose the outer layer, it’s not the end of the service life for the product. You get a second chance. *Just like almost everything else in the hobby…these cords are replaceable. **When they do eventually wear out, you are expected to replace them.
@2XRC Жыл бұрын
Great knowledge summarized for us. Thanks for the extensive detail 🙏
@throbnarley4049 Жыл бұрын
All killer builds. Looks like your product works
@paulosrcs185 Жыл бұрын
Bro just checked your ebay absolute fire 🔥 do u deliver to UK if so I will defo be purchasing a kit in the near future for my big rock ...liked and subscribed 👍👊🙏
@rcmadlabz2492 Жыл бұрын
Yes, eBay automatically handles our international sales. 👍
@paulosrcs185 Жыл бұрын
@@rcmadlabz2492 sweet bro
@rogueFactor Жыл бұрын
i loooove this #ARRMA #4S setup. it scoots quick! looks about as quick as my #FIRETEAM on #6S with a 18T pinion. #TYPHON is always a great choice but cartwheel #crashes are what dreams are made of!
@rcmadlabz2492 Жыл бұрын
Right on Target! It’s easy to decide to slap in a larger can size motor, like a 4268 series. Problem with all that added power, is keeping the front end on the ground…being able to go fast under control. *For the areas we run, and the way we use our models…we don’t need more Top Speed MPH. We want better 0-45mph in a short distance, better stability, better handling…cool temps and long run time.
@captaincouldverc Жыл бұрын
Yeah I agree, that 2400kv motor is way better for that set up. Seemed like the power delivery was smooth and easily predictable too.
@antoinejohnson2799 Жыл бұрын
What do u need a sway bar for ?
@rcmadlabz2492 Жыл бұрын
To run the suspension with lighter oils, and still keep the model flat. Otherwise, To fight the suspension roll, You’re compromising the handling with thicker shock oils.
@antoinejohnson2799 Жыл бұрын
Ok cool
@islandrc-duke1972 Жыл бұрын
cool showcase,great video
@tamerabufarwa7531 Жыл бұрын
I used the electronic And 8s
@RevelationRC Жыл бұрын
What the? That's crazy! 6 wheels 👍
@Mandela7FF Жыл бұрын
Full support ❤️
@Mandela7FF Жыл бұрын
I'm New Subscriber bro from brazil ❤️🇧🇷
@rcmadlabz2492 Жыл бұрын
Welcome!!!
@islandrc-duke1972 Жыл бұрын
cool rc's and awesome bashing,nice kits
@ihde2000 Жыл бұрын
Loved the video 🙃
@rogueFactor Жыл бұрын
great compilation! i need to get a few more ordered asap!
@islandrc-duke1972 Жыл бұрын
awesome bashing and great test and review
@captaincouldverc Жыл бұрын
I'll tell you what, after seeing how rogue abused his k4sv2 with your chassis plate, it got me thinking about getting a 4sv2 outcast and a plate from you.
@captaincouldverc Жыл бұрын
I had no idea they beefed this up like they did. I thought it was just a glorified dbx07. I was wrong. Well done.
@rcmadlabz2492 Жыл бұрын
Tomleyrc and Kevin Talbot both, NOW, have videos showing what “out of the box” is like in RTR form….what I said in this video is easily seen if you watch thier videos
@captaincouldverc Жыл бұрын
@@rcmadlabz2492 To be honest, I don't follow the bigger rc channels anymore. I do know they've tested it, I just haven't got around to watching yet. Holiday season got me really busy.
@nobeardrc798 Жыл бұрын
Very good video so much input. By any change do you know what is hub size for these ? as Im trying to use their tire on my xmaxx/outcast 8s
@rcmadlabz2492 Жыл бұрын
The MX-07 wheels are 17mm hex size….which I was worried about, being 22lb model. (They are still holding up). *To use these on an Xmaxx/outcast 8s…you would have to switch to the smaller hex, which goes against my better thinking…I wouldn’t recommend it)
@nobeardrc798 Жыл бұрын
@@rcmadlabz2492 ahh what a bummer. Thanks anyway
@rcmadlabz2492 Жыл бұрын
@@nobeardrc798 This is against my better judgment, but it’s been done many times before….(switching the Xmaxx to 17mm hex, then these MX-07 wheels/tires will bolt up). kzbin.info/www/bejne/lZjYlqJobraFrqc
@rcbreakdown3066 Жыл бұрын
Bro the mods you've done are impressive. Would you do it again Knowing what you've learnt from testing so far?
@rcmadlabz2492 Жыл бұрын
I had to redo my reply…I thought this was about the “aha beetle” that I built. *The answer is YES! The platform is awesome, and I was able to mod it into exactly what I wanted. The customizing and build aspect of the hobby is something I really enjoy. **What I did isn’t for the faint of heart or anyone without fab skills and certainly isn’t for anyone on a budget. I did it for the enjoyment, to be different, and most of all “because I can”. 👍
@islandrc-duke1972 Жыл бұрын
great how to video
@moereefer Жыл бұрын
subbed
@hinterlandrc1469 Жыл бұрын
Awesome! Thank you very much for yor work!
@islandrc-duke1972 Жыл бұрын
Cool upload and great information
@rcmadlabz2492 Жыл бұрын
👍👍
@rogueFactor Жыл бұрын
wholly sht those A-ARMS on that last Typhon are like gullwings. wtf RPM?!
@RevelationRC Жыл бұрын
Been there brother 😁👍
@MRCG68 Жыл бұрын
all those mods still not help him to be good , its jsut an ok car for sunday drivers and regarding new price and mods etc i real still prefere to take hobao mt2 and put the zd body on it hiihihih
@rcmadlabz2492 Жыл бұрын
It was a challenge and fun to build….🤓. Yes, I really like your Hobao Mt2. The new version of the dbx-07 I have built works great for my expectations. *Its a “Desert Buggy” that has a lot going for it now….Not at all like an Xmaxx or Mt2.
@MRCG68 Жыл бұрын
hellooo Dan
@rcmadlabz2492 Жыл бұрын
Hi, I got the dbx-07 all sorted out. 👍
@rogueFactor Жыл бұрын
i am diggin these updates! you are a hobbyist's hobbyist, my dude.
@rcmadlabz2492 Жыл бұрын
More to come! 😎
@nonodrum Жыл бұрын
Thanks for the video, I know Many's, I'm the new owner of the DBX07. I also made changes but not as complete as yours. They are visible on my secondary youtube channel, but in French, I do not master English. kzbin.info/door/kzqjS5vWfrDVOHglg3KsVA
@rcmadlabz2492 Жыл бұрын
Ahhh, yes…I have been watching your progress. 👍
@nonodrum Жыл бұрын
Hello, very good video, and the modifications of the DB are instructive. Is the DBX more reliable since the modifications? What part number did you use? Sincerely, Bruno.
@rcmadlabz2492 Жыл бұрын
Bruno, I am working a video showing all the details of the build process, the part numbers…everything someone needs to know. *The dbx is completely reliable and 100% improved with these specific modifications done.
@nonodrum Жыл бұрын
@@rcmadlabz2492 Thank you for your reply. I started listing the parts, using the base of the Arrma Mojave 6s. The dimensions seem to match. I'm waiting for your video. Thanks Bruno.
@rcmadlabz2492 Жыл бұрын
@@nonodrum It’s not exactly a direct swap…be sure to hang in there for the details.
@nonodrum Жыл бұрын
@@rcmadlabz2492 Ok ,Thank you.
@rcmadlabz2492 Жыл бұрын
@@nonodrum Here you go!! kzbin.info/www/bejne/bKqnkHidr7SXjMU
@islandrc-duke1972 Жыл бұрын
cool setup and ouch
@islandrc-duke1972 Жыл бұрын
@@rcmadlabz2492 🙂👍👍
@islandrc-duke1972 Жыл бұрын
@@rcmadlabz2492
@islandrc-duke1972 Жыл бұрын
sorry never had that problem,might be something wrong with the main board for that channel or it could be a bad wire or solder connection,look on line for a video that might say something about a master reset for the remote